Publikationen

Fraunhofer-Publica

Für wissenschaftliche Veröffentlichungen aus der Fraunhofer-Forschung steht Ihnen die Datenbank »Fraunhofer-Publica« für Ihre Recherchen zur Verfügung. Fraunhofer-Publica ist eine multidisziplinäre Datenbank in der Publikationen der Fraunhofer-Gesellschaft, ihrer Institute sowie deren Mitarbeiterinnen und Mitarbeiter nachgewiesen sind. Mit weit über 100.000 Titelangaben bildet sie das gesamte Forschungsspektrum der Fraunhofer-Gesellschaft ab. Jährlich kommen ca. 8.000 Neuerscheinungen hinzu. 

Folgende Dokumente sind in Fraunhofer-Publica enthalten:

  • Bücher
  • Zeitschriftenaufsätze
  • Aufsätze aus Büchern oder Konferenzbänden
  • Tagungsbände
  • Hochschulschriften
  • Forschungsberichte
  • Patente

Die Datenbank »Fraunhofer-Publica« wird von FhG-Online im Auftrag der Zentrale der Fraunhofer-Gesellschaft in Zusammenarbeit mit den Fraunhofer-Instituten und deren Bibliotheken erstellt.

Nachfolgend finden Sie eine Liste aller Publikationen des Fraunhofer ICT aus den vergangenen zehn Jahren.

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014

Publikationen aus dem Jahr 2024

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2024 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2024 A Novel LIBS Sensor for Sample Examinations on a Crime Scene
Lazic, Violeta; Andreoli, Fabrizio; Almaviva, Salvatore; Pistilli, Marco; Menicucci, Ivano; Ulrich, Christian; Schnürer, Frank; Chirico, Roberto
Zeitschriftenaufsatz
Journal Article
2024 A viscoelastic-viscoplastic modeling approach for amorphous polymers in vacuum forming simulation
Schwär, Florian; Kauffmann, Axel
Zeitschriftenaufsatz
Journal Article
2024 Adjustment of Electrolyte Composition for All-Vanadium Flow Batteries and its Effect on the Thermal Stability of Electrolyte for Positive and Negative Half-Cells
Roznyatovskaya, Nataliya; Fühl, Matthias; Joos, Martin; Noack, Jens; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2024 Challenges and Requirements in comparative Life Cycle Assessment of Plastics Recycling
Kerps, Anna; Dobers, Kerstin; Jarmer, Jan-Philipp; Dieterle, Michael; Nioac de Salles, Ana Claudia; Maga, Daniel; Galafton, Christina
Paper
2024 Computational Insights for the Catalytic Depolymerisation of PET
Killinger, Lukas; Majgaonkar, Pranav; Hanich-Spahn, Ronny; Flick, Klemens; Hashmi, A. Stephen K.
Poster
2024 Der Nationale Wasserstoffrat der deutschen Bundesregierung
Maletzko, Annabelle; Wurster, Sebastian; Pinkwart, Karsten
Zeitschriftenaufsatz
Journal Article
2024 Electroreduction of divanillin to polyvanillin in an electrochemical flow reactor
Kunkel, Robin; Fath, Maximilian; Schmiedl, Detlef; Schmidt, Volkmar M.; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2024 Faster, greener, scooter? An assessment of shared e-scooter usage based on real-world driving data
Krauß, Konstantin; Gnann, Till; Burgert, Tobias; Axhausen, Kay W.
Zeitschriftenaufsatz
Journal Article
2024 Graphitizability of Polymer Thin Films: An In Situ TEM Study of Thickness Effects on Nanocrystalline Graphene/Glassy Carbon Formation
Shyam Kumar, C.N.; Possel, Clemens; Dehm, Simone; Chakravadhanula, Venkata Sai Kiran; Wang, Di; Wenzel, Wolfgang; Krupke, Ralph; Kübel, Christian
Zeitschriftenaufsatz
Journal Article
2024 Hybrid Seat Structures - Efficient and Suitable for Large-Scale Production
Emmerich, Rudolf; Ilinzeer, Sergej; Hanich-Spahn, Ronny
Zeitschriftenaufsatz
Journal Article
2024 Insensitive high explosives: VI. experimental determination of the chemical compatibility of nitroguanidine with seven high explosives
Bohn, Manfred; Heil, Moritz; Pontius, Heike; Koch, Ernst Christian
Zeitschriftenaufsatz
Journal Article
2024 Methodology for the Holistic Design of Format-Flexible Lithium-Ion Battery Systems
Gandert, Julia; Mühlpfort, Raphael; Müller-Welt, Philip; Schall, Daniel; Schmidt, Adrian; Schuhmann, Sebastian; Seegert, Philipp; Weber, Niklas; Zeng, Yunying; Wetzel, Thomas; Paarmann, Sabine
Zeitschriftenaufsatz
Journal Article
2024 Microwave-based removal of polyurethane and epoxy floor coatings
Ruf, Maximilian; Sims, Stefan; Hillebrand, Georg; Schneider, Jan-Pierre
Zeitschriftenaufsatz
Journal Article
2024 Prozessspezifische Einflussgrößen auf die Morphologie kontinuierlich faserverstärkter thermoplastischer Halbzeuge und deren Auswirkungen auf die mechanischen Eigenschaften
Link, Tobias
Dissertation
Doctoral Thesis
2024 Recycalyse - New Sustainable and Recyclable Catalytic Materials for Proton Exchange Membrane Electrolysers
Melke, Julia; Maletzko, Annabelle; Gomez Villa, Eduardo Daniel; Bornet, Aline; Wiberg, Gustav K.H.; Arenz, Matthias; Sandig-Predzymirska, Lesia; Thiere, Alexandra; Charitos, Alexandros; Stelter, Michael; Wang, Zhangqi; Pitscheider, Simon; Bertheussen, Erlend; Pedersen, Christoffer M.; Finsdóttir, Sára; Kokborg, Morten S.; Berman, Daniel G.; Dalvang, Simone; Müller, Sebastian S.; Seidel, Fabian; Seselj, Nedjeljko; Höglinger, Martin; Kartusch, Stefan; Eder, Joshua; Macherhammer, Marie-Gabrielle; Trattner, Alexander; Kallesøe, Christian
Zeitschriftenaufsatz
Journal Article
2024 Rheological characterization and macroscopic modeling and simulation of the molding process of a PA6 Glass Mat Thermoplastic (GMT)
Dörr, Dominik; Singh-Heer, Navraj; Gergely, Ryan C.R.; Schreyer, Louis; Henning, Frank; Straatman, Anthony G.; Hrymak, Andrew
Zeitschriftenaufsatz
Journal Article
2024 Setting behavior and mechanical properties of geopolymers from fly ash and real construction waste
Kugler, Felix; Krcmar, Wolfgang; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2024 Switchable Heat Pipes for Eco-Friendly Battery Cooling in Electric Vehicles: A Life Cycle Assessment
Illner, Maike; Thüsing, Kai; Nioac de Salles, Ana Claudia; Trettenhann, Anian; Albrecht, Stefan; Winkler, Markus
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2023

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2023 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2023 3D Skeleton Winding (3DSW) - Robot-based 3D Filament Winding and FEA-based Dimensioning of Skeleton-like Continuous Fiber-Reinforcements for Thermoplastic Structural Parts
Haas, Jonathan; Beck, Björn; Park, Young-Bin; Henning, Frank
Vortrag
Presentation
2023 A CFD Investigation of Thermal Hot Spots in the Ignition Process of DEM Based Three Dimensional Propellant Beds
Tomaschewski, Daniel; Baust, Tobias Michael
Konferenzbeitrag
Conference Paper
2023 A CFD investigation of thermal hot spots in the ignition process of DEM based three-dimensional propellant beds
Tomaschewski, Daniel
Poster
2023 A CFD investigation of thermal hot spots in the ignition process of DEM based three-dimensional propellant beds
Tomaschewski, Daniel
Vortrag
Presentation
2023 A hyperelastic material model considering biaxial coupling of tension-compression and shear for the forming simulation of woven fabrics
Schäfer, Florian; Werner, Henrik O.; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2023 A probabilistic virtual process chain to quantify process-induced uncertainties in Sheet Molding Compounds
Meyer, Nils; Gajek, Sebastian; Görthofer, Johannes; Hrymak, Andrew Nick; Kärger, Luise; Henning, Frank; Schneider, Matti; Böhlke, Thomas
Zeitschriftenaufsatz
Journal Article
2023 A study on the mechanical recycling of continuous glass fibre reinforced nylon 6 profiles produced by in-situ pultrusion
Wilhelm, Michael Leander; Kummert, Henrik Hans; Suratkar, Aaditya Pradeep; Rosenberg, Philipp; Henning, Frank
Vortrag
Presentation
2023 A study on the mechanical recycling of continuous glass fibre reinforced Nylon 6 profiles produced by in situ pultrusion
Wilhelm, Michael Leander; Kummert, Henrik Hans; Suratkar, Aaditya Pradeep; Rosenberg, Philipp; Henning, Frank
Vortrag
Presentation
2023 Abschlussbericht des Teilvorhabens BiFlow
Roznyatovskaya, Nataliya
Bericht
Report
2023 Additiv gefertigten Leichtbaumotor fügen
Zabirov, Alexander; Bucherer, Sebastian; Laux, Marcel; Schleser, Markus
Zeitschriftenaufsatz
Journal Article
2023 Additive Manufacturing of Gun Propellants based on GAP-ETPE by Material Extrusion
Mitró, Daniel; Dresel, Alexander; Böhnlein-Mauß, Jutta
Konferenzbeitrag
Conference Paper
2023 Advanced Characterization by Using Coupled Operando Mass Spectrometry and Operando Dilatometry
Petit, Tim Jan; Heugel, Philipp; Joos, Martin; Klein, Franziska; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2023 Aktuelle Themen in der Entwicklung von Treibladungspulvern
Dresel, Alexander; Böhnlein-Mauß, Jutta; Mitró, Daniel; Cäsar, Markus
Vortrag
Presentation
2023 Alternative Kraftstoff- und Antriebstrangtechnologien für mittlere Nutzfahrzeuge im Nahverteilerverkehr
Bidart Sanchez, Christian; Götz, Benedict Johannes; Heim, Rüdiger; Kolb, Gunther; Kowarik, Haiko; Kraljevic, Ivica; Rümmele, Florian; Szolak, Robert
Konferenzbeitrag
Conference Paper
2023 Ammonium and Tartrate Salts as Alternatives to Neutral Aqueous Electrolytes for Supercapacitors
Heumann, Johannes; Baltes, Norman; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2023 An easy-to-use modification of the potential theory of adsorption and creation of an adsorbent data base
Teicht, Christian
Zeitschriftenaufsatz
Journal Article
2023 Analyse des Fuhrparks der Polizei Baden-Württemberg
Burgert, Tobias; Tröger, Josephine; Auf der Maur, Alex; Burghard, Uta; Dillmann, Simon; Brutsche, Andreas; Trachsel, Tim; Brune, Kai Lennart
Bericht
Report
2023 Analysis of the effects of die geometry and processing parameters on extruded polystyrene foams: theory, numerical simulation and experimental validation
Lunagariya, Parimal
Master Thesis
2023 Approaching Polycarbonate as an LFT-D Material: Processing and Mechanical Properties
Schelleis, Christoph; Scheuring, Benedikt M.; Liebig, Wielfried V.; Hrymak, Andrew N.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2023 Asymmetrically Substituted s-Triazine Phosphonates by One-Step Synthesis
Vogt, Claudia; Höhne, Carl-Christoph; Limburger, Jennifer; König, Alexander; Wagener, Tobias; Kroke, Edwin
Zeitschriftenaufsatz
Journal Article
2023 Auf dem Weg zur Kreislaufführung
Krüger, Anna; Kilian, Sascha
Zeitschriftenaufsatz
Journal Article
2023 BabbA - Biologisch abbaubare Beutel in der Bioabfallverwertung
Forberger, Jens; Freitag, Ruth; Laforsch, Christian; Kandeler, Ellen; Geyer, Jürgen; Kröner, Ulrike; Pagel, Holger; Steiner, Thomas; Freitag, Ruth; Löder, Martin; Bayha, Ansilla; Gromer, Gabriela; Möller, Julia
Bericht
Report
2023 Bedeutung IP-Schutzart
Cäsar, Joachim
Konferenzbeitrag
Conference Paper
2023 Beitrag der Forschung zur Sicherheit von Einsatzkräften bei der Brandbekämpfung von Batteriesystemen
Höhne, Carl-Christoph; Abert, Michael; Gettwert, Volker; Cremers, Carsten; Berg, Lars-Fredrik; Kuchenreuther-Hummel, Veronica; Knapp, Sebastian; Keßler, Armin; Liebertseder, Johannes; Menrath, Andreas; Mack, Christoph; Müller, Paul; Weiser, Volker; Beck, Björn; Wilhelm, Michael Leander
Poster
2023 Bench scale fuel fire test for materials of rechargeable energy storage system housings
Höhne, Carl-Christoph; Gettwert, Volker; Menrath, Andreas; Ilinzeer, Sergej
Konferenzbeitrag
Conference Paper
2023 Bench-scale fuel fire test for materials of rechargeable energy storage system housings
Höhne, Carl-Christoph; Gettwert, Volker; Menrath, Andreas; Ilinzeer, Sergej
Poster
2023 Bench-scale fuel fire test for materials of rechargeable energy storage system housings
Höhne, Carl-Christoph; Gettwert, Volker; Frank, Fabian; Kilian, Sascha; Menrath, Andreas
Zeitschriftenaufsatz
Journal Article
2023 Bench-Scale Fuel-Fire-Test zur Bewertung von Materialien für Traktionsbatterie-Gehäuse
Höhne, Carl-Christoph; Gettwert, Volker
Konferenzbeitrag
Conference Paper
2023 Bench-Scale Fuel-Fire-Test zur Bewertung von Materialien für Traktionsbatterie-Gehäuse
Höhne, Carl-Christoph; Gettwert, Volker
Vortrag
Presentation
2023 Bottom-up system modeling of battery storage requirements for integrated renewable energy systems
Henni, Sarah; Schäffer, Michael; Fischer, Peter; Weinhardt, Christof; Staudt, Philipp
Zeitschriftenaufsatz
Journal Article
2023 Cabin Interior Demonstrator: Impact Projection for Hybrid Seating Structures
Reichert, Thomas; Nioac de Salles, Ana Claudia; Renn, Hannah; Hanich-Spahn, Ronny; Höhne, Carl-Christoph; Brantsch, Peter; Emmerich, Rudolf; Ilinzeer, Sergej
Poster
2023 Catalytic Depolymerisation of PET
Killinger, Lukas; Majgaonkar, Pranav; Hanich-Spahn, Ronny; Flick, Klemens; Hashmi, A. Stephen K.
Poster
2023 Centrifugal and acoustic mixing technologies for the Homogenization of propellant powder formulations
Cäsar, Markus; Weilbach, Simon; Böhnlein-Mauß, Jutta; Dresel, Alexander
Konferenzbeitrag
Conference Paper
2023 Challenges of using fuel cells to deliver aircraft propulsion power
Cremers, Carsten
Vortrag
Presentation
2023 Characterization of Carbon Materials
Bron, Michael; Melke, Julia; Steimecke, Matthias
Aufsatz in Buch
Book Article
2023 Characterizing the Run-to-Detonation Distance of Hexanitrostilbene by Gap Test Experiments and Simulations
Zimmermann, Claudius
Konferenzbeitrag
Conference Paper
2023 Characterizing the Run-to-Detonation Distance of HNS by Gap Test Experiments and Simulations
Zimmermann, Claudius
Poster
2023 Characterizing the shock sensitivity of Hexanitrostilbene by flyer impact experiments and simulations
Zimmermann, Claudius; Baust, Tobias Michael
Konferenzbeitrag
Conference Paper
2023 Charakterisierung des Einflusses der geometrischen Präzision von Bipolarplatten auf das Leistungsverhalten eines HT-PEM-Brennstoffzellenstacks bei verschiedenen Anodengaszusammensetzungen
Kraft, Samuel
Master Thesis
2023 Charakterisierung des Plastifikates an der Schnittstelle zwischen Compounding und Fließpressen langfaserverstärkter thermoplastischer Formmassen
Löwe, Sven
Bachelor Thesis
2023 Charakterisierung von gepressten Sprengladungen am Beispiel von Co-Kristallen
Gerber, Peter; Herrmann, Michael
Vortrag
Presentation
2023 Chemical Recycling of Carbon Fibre Reinforced Polyurethane for Aviation Applications
Höhne, Carl-Christoph; Brantsch, Peter; Reichert, Thomas; Hanich-Spahn, Ronny
Zeitschriftenaufsatz
Journal Article
2023 Chemical Stability and Thermal Analysis - The use of terms with energetic materials with regard to chemical-thermal decomposition
Bohn, Manfred
Konferenzbeitrag
Conference Paper
2023 Chemical Thermal Runaway Modeling of Lithium‐Ion Batteries for Prediction of Heat and Gas Generation
Weber, Niklas; Schuhmann, Sebastian; Tübke, Jens; Nirschl, Hermann
Zeitschriftenaufsatz
Journal Article
2023 Circularity Assessment
Müller, Torsten
Vortrag
Presentation
2023 Comparison of thermoset wing panels for aircraft applications - Life Cycle Assessment
Reichert, Thomas; Renn, Hannah; Brantsch, Peter; Deutsch, Zvicka; Idel, Snir; Helber, Florian; Dungern, Friedrich von; Koimtzoglou, Christos; Prado, Luis
Poster
2023 Compatibility of nitroguanidine with seven high explosives determined by gas generation and heat flow microcalorimetry
Bohn, Manfred; Heil, Moritz; Pontius, Heike; Koch, Ernst-Christian
Konferenzbeitrag
Conference Paper
2023 Concept and Design of a High Power Dense Propulsion System for Electric Aircraft
Beneke, Lennart
Master Thesis
2023 Connected Factory: Impact Projection for Efficient Manufacturing by Collaborative Robots
Nioac de Salles, Ana Claudia; Reichert, Thomas; Renn, Hannah; Ruiz, Ana Maria; Cordero, Jorge
Poster
2023 Contribution of MFFD consortium to Eco TA
Höhne, Carl-Christoph; Brantsch, Peter; Solares-Canal, Marta; Lopez, Laura Costa
Vortrag
Presentation
2023 Cooperative Automated Driving for Bottleneck Scenarios in Mixed Traffic
Baumann, M.V.; Beyerer, Jürgen; Buck, H.S.; Deml, Barbara; Ehrhardt, Sofie; Frese, Christian; Kleiser, Dominik; Lauer, Martin; Roschani, Masoud; Ruf, Miriam; Stiller, Christoph; Vortisch, Peter; Ziehn, Jens
Konferenzbeitrag
Conference Paper
2023 Coupled-Level-Set-and-Volume-Of-Fluid-Modell für heterogene Raketenfesttreibstoffe
Moroff, Michael
Vortrag
Presentation
2023 Critical Materials for Climate Technologies in the EU. An overview of five renowned studies
Barkhausen, Robin; Schmidt, Patrick Alexander; Gervais, Estelle; Heumann, Johannes; Hofmann, Alexander
Paper
2023 Der Digitale Zwilling in der Batteriezellfertigung
Krauß, Jonathan; Schmetz, Arno; Fitzner, Antje; Ackermann, Thomas; Pouls, Kevin Bernard; Hülsmann, Tom-Hendrik; Roth, David; Gehring, Janine; Hamacher, Nils Christian; Jaspers, Wilhelm; Mohring, Leon; Rube, Natalja; Tübke, Jens; Kies, Alexander D.; Kreppein, Alexander; Abramowski, Johann-Philip; Schmitt, Robert H.; Baum, Christoph; Brandstetter, Alexander; Singh, Soumya; Cziasto, Dennis; Meyer, Olga; Kornely, Mia J.K.; Kraus, Sander; Niemietz, Philipp; Bergs, Thomas; Kampker, Achim
Paper
2023 Design and Analysis of an Off Grid Hybrid Renewable Energy System to supply Electricity in Hydroponics SBR Reactors and Mobile Base Station in Kenya
Kumar, Akshay
Master Thesis
2023 Design and Implementation of Energy-Water Nexus Management in a Solar-Powered NFT Hydroponic System
Sidibé, Abdoulaye; Ndeda, Rehema; Murimi Nyamu Wanjiru, Evan; Mutwiwa, Urbanus N.; Kriem, Lukas; Beckett, Marc; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2023 Designing Circular Products with new Monomaterial Sandwichstructures
Schreiner, Sabrina; Krüger, Anna
Vortrag
Presentation
2023 Deutsche Normungsroadmap Circular Economy
Bericht
Report
2023 Development of a standardized data acquisition prototype for heterogeneous sensor environments as a basis for ML applications in pultrusion
Helfrich, Timo; Wilhelm, Michael Leander
Vortrag
Presentation
2023 Development of high temperature resistant thermoplastic foams based on stereocomplex PLA
Leja, Julia
Master Thesis
2023 Die Life Cycle Gap Analyse - Herleitung, Definition und exemplarische Anwendung
Dieterle, Michael
Dissertation
Doctoral Thesis
2023 Digital Kreisläufe schließen am Beispiel des Recyclings von Sportbooten, Leichtflugzeugen sowie Bedarfsgegenständen aus Faserverbundwerkstoffen
Burgstaller, Maria; Frick, Felicitas; Potrykus, Alexander; Schramm, Benjamin; Strauss, Felix; Scheer, Selina; Link, Franziska; Behringer, Katharina; Pfuhl, Wolfgang; Schlenga, Robin; Brantsch, Peter; Menrath, Andreas; Müller, Torsten; Nieberl, Martin; Hofmann, Alexander; Reh, Katharina
Bericht
Report
2023 Dipropylene glycol bis(2-azidobutyrate) - a new energetic azido plasticizer
Keicher, Thomas; Schaller, Uwe; Maier, Marko
Konferenzbeitrag
Conference Paper
2023 ecoDESIGN and Sustainable Productivity
Moll, Torsten; Schweppe, Rainer
Vortrag
Presentation
2023 EcoDESIGN in Next Generation Aircraft Fuselage: EcoDesign applied to LPA demonstrators
Solares-Canal, Marta; Lopez, Laura Costa; Herrmann, Ralf; Wölcken, Piet-Christof; Höhne, Carl-Christoph; Brantsch, Peter
Vortrag
Presentation
2023 Einfluss von Glas- und Karbonfasern auf die Prozessführung und die Eigenschaften von Polyamidschaum im Extrusionsprozess
Kütük, Abdulkadir
Bachelor Thesis
2023 Einsatz von Machine Learning bei energetischen Materialien – Theorie und Praxis
Heil, Moritz
Vortrag
Presentation
2023 Electrochemical rebalancing process for vanadium flow batteries: Sizing and economic assessment
Poli, Nicola; Trovò, Andrea; Fischer, Peter; Noack, Jens; Guarnieri, Massimo
Zeitschriftenaufsatz
Journal Article
2023 Energetic Materials - Analysis, Characterization, Modelling
Tagungsband
Conference Proceeding
2023 Energetic materials and machine learning. Requirements and application
Heil, Moritz; Langer, Jan
Konferenzbeitrag
Conference Paper
2023 Energieeffiziente und qualitätsorientierte Anlagenkonzepte für die Batteriezellfertigung
Heller, Marius; Turhan, Hasibe; Holöchter, Niels; Miggelt, Matthias; Niggestich, Max; Schöne, Nele; Janning, Florenz; Wessel, Saskia; Tübke, Jens
Paper
2023 Entwicklung einer inline-Profilierungsmethode für in-situ-pultrudierte Faserverbundkunststoff-Bewehrungsstäbe
Fünkner, Moritz
Master Thesis
2023 Entwicklung eines erweiterten Verfahrens zur Verarbeitung von treibgasbeladenen Partikelschäumen mittels Radiofrequenz-Technologie
Pfeifer, Robin
Master Thesis
2023 Entwicklung eines Versuchsstandes zur Untersuchung von Phasenwechselmaterialien (PCM) mit verbesserter Wärmeleitfähigkeit
Oberst, Björn
Master Thesis
2023 Entwicklung und Untersuchung eines elektrochemischen Prozesses zur Erzeugung biobasierter Polymere aus Vanillin
Kunkel, Robin
Dissertation
Doctoral Thesis
2023 Environmental Improvement Potential of Flexible Polyurethane Foam for Aviation Applications - A Case Example Analysis
Höhne, Carl-Christoph; Nioac de Salles, Ana Claudia; Brantsch, Peter; Reichert, Thomas; Hanich-Spahn, Ronny
Zeitschriftenaufsatz
Journal Article
2023 Epoxy Vitrimers - thermal and flame retardant properties
Berner, Valeria; Huegun, Arrate; Hammer, Larissa; Cristadoro, Anna Maria; Höhne, Carl-Christoph
Poster
2023 Evaluation of the reactivity of Hexyl isocyanate with selected stabilizers by 1H NMR spectroscopy
Hettmanczyk, Lara; Müller, Jan-Benedict; Schaller, Uwe
Konferenzbeitrag
Conference Paper
2023 EXERTER - Security of Explosives pan-European Specialists Network
Schnürer, Frank; Wittek, Michael; Ulrich, Christian; Ehlerding, Anneli; Middleton, Jonathan
Konferenzbeitrag
Conference Paper
2023 Experimental and Numerical Investigation of Spark Plug and Passive Pre-Chamber Ignition on a Single-Cylinder Engine with Hydrogen Port Fuel Injection for Lean Operations
Bucherer, Sebastian; Rothe, Paul Ewald; Sobek, Florian Helmut Karl; Gottwald, Theo; Kraljevic, Ivica; Vacca, Antonino; Gal, Thomas; Chiodi , Marco; Kulzer, Andre
Vortrag
Presentation
2023 Experimental and predictive analysis of the molding behavior of a PA6 glass mat thermoplastic (GMT)
Dörr, Dominik; Singh-Heer, Navraj; Xu, Cheng; Chang, Thomas; Clement-Thorne, Broderic; Gergely, Ryan C. R.; Okonski, David; Henning, Frank; Straatman, Anthony G.; Hrymak, Andrew
Zeitschriftenaufsatz
Journal Article
2023 Experimental and Simulative Analysis of the Pressure Development in a Closed Injection Pultrusion Process with Multiple Chamber Geometries
Strauß, Sebastian; Wilhelm, Frederik; Senz, Andreas; Engelen, Herbert; Boysen, Simon; Rilli, Niko; Celik, Alptekin; Ratka, Marcel; Bonten, Christian
Zeitschriftenaufsatz
Journal Article
2023 Experimental Application of Real-Time Optimization with Modifier Adaptation and Quadratic Approximation to a Reactive Extrusion Process
Cegla, Maximilian; Fage, Aleksandra; Kemmerling, Simon; Engell, Sebastian
Zeitschriftenaufsatz
Journal Article
2023 Experimentelle und theoretische Bestimmung der CO2-Löslichkeit in PLA zur Modellierung der Gasbeladung im Autoklavprozess
Wolf, Lukas
Bachelor Thesis
2023 Flow Batteries: From Fundamentals to Applications
Sammelband
Anthology
2023 Flüssige und gelförmige Raketentreibstoffe – Stand und Herausforderungen
Hürttlen, Jürgen; Schaller, Uwe; Weiser, Volker; Pietrek, Philip
Vortrag
Presentation
2023 Formulation and characterization of zinc slurries for zinc slurry - Air redox flow battery: A rheological approach
Milian, Diego; Choi, Nak Heon; Tsehaye, Misgina Tilahun; Fischer, Peter; Tübke, Jens; Iojoiu, Cristina; Roux, Denis C.D.; El Kissi , Nadia
Zeitschriftenaufsatz
Journal Article
2023 From flame retardant polystyrene foams to intrinsically flame retardant styrenic copolymers without halogens
Fuchs, Sabine; Andruschko, Mateusz; Fabritius, Helge-Otto; Frank, Petra; Höhne, Carl-Christoph; Jonas, Ulrich; Luksin, Michael
Vortrag
Presentation
2023 Gummi-Recycling von Waschmaschinen-Dichtungen
Just, Daniel; Moser, Kevin; Diemert, Jan
Zeitschriftenaufsatz
Journal Article
2023 Haushaltsgerät mit einem einen Latentwärmespeicher umfassenden Wärmetauscher
Pappert, Sandra; Teicht, Christian; Walter, Moritz; Thüsing, Kai
Patent
2023 Heatpipe-basierte Wärmeschalter für Energiesysteme
Teicht, Christian; Winkler, Markus
Zeitschriftenaufsatz
Journal Article
2023 Herstellung und Charakterisierung von Partikelschäumen aus Biopolymerblends auf der Basis von PLA und PBS
Raff, Timo
Bachelor Thesis
2023 Herstellung von Polypropylen Schaumstoffen aus Rezyklaten im Autoklav-Prozess
Damm, Roman
Bachelor Thesis
2023 History of Flow Batteries
Noack, Jens; Skyllas-Kazacos, Maria; Thaller, Larry; Tomazic, Gerd; Jonshagen, Bjorn; Morrissey, Patrick
Aufsatz in Buch
Book Article
2023 Human toxicity assessment of WEEE recycling process
Tripathi, Neeraj; Nioac de Salles, Ana Claudia; Reinhardt, Sebastian; Fantke, Peter
Vortrag
Presentation
2023 Hybride Sitzstrukturen - effizient und großserientauglich
Emmerich, Rudolf; Ilinzeer, Sergej; Hanich-Spahn, Ronny
Zeitschriftenaufsatz
Journal Article
2023 Impact of catalyst support morphology on 3D electrode structure and polymer electrolyte membrane fuel cell performance
Peter, Benedikt; Stoeckel, Daniela; Scherer, Torsten; Kuebel, Christian; Roth, Christina; Melke, Julia
Zeitschriftenaufsatz
Journal Article
2023 Implementation and comparison of algebraic and machine learning based tensor interpolation methods applied to fiber orientation tensor fields obtained from CT images
Blarr, Juliane; Sabiston, Trevor D.; Krauß, Constantin; Bauer, Julian Karl; Liebig, Wilfried; Inal, Kaan A.; Weidenmann, Kay André
Zeitschriftenaufsatz
Journal Article
2023 Implementation of the 3D skeleton winding technology for thermoplastic structural components
Beck, Björn
Dissertation
Doctoral Thesis
2023 Influence of propellant geometry on erosion in vented vessel tests
Kuchenreuther-Hummel, Veronica; Heidebrecht, Thomas
Konferenzbeitrag
Conference Paper
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica
Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2023 Influence of strong bromine binding complexing agent in electrolytes on the performance of hydrogen/bromine redox flow batteries
Kuettinger, Michael; Saadi, Kobby; Faverge, Théo; Samala, Nagaprasad Reddy; Grinberg, Ilya; Zitoun, David; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2023 Influence of Temperature on the Performance of Carbon- and ATO-supported Oxygen Evolution Reaction Catalysts in a Gas Diffusion Electrode Setup
Bornet, Aline; Pittkowski, Rebecca Katharina; Nielsen, Tobias M.; Berner, Etienne; Maletzko, Annabelle; Schröder, Johanna; Quinson, Jonathan; Melke, Julia; Jensen, Kirsten Marie Ørnsbjerg; Arenz, Matthias
Zeitschriftenaufsatz
Journal Article
2023 INHERIT - an EU Project aiming to reduce threats from homemade explosives
Keicher, Thomas; Schaller, Uwe; Dornick, Gudrun; Maier, Marko; Wilhelm, Isabel; Önnerud, Hans
Konferenzbeitrag
Conference Paper
2023 Integration of NDT into the manufacturing process chain of functionalized UD-tape components
Suratkar, Aaditya Pradeep; Schürger, Christian; Summa, Jannik; Schlimper, Ralf; Wolf, Klaus; Rosenberg, Philipp; Henning, Frank
Konferenzbeitrag
Conference Paper
2023 Interaction of Catalysts for Unitized Regenerative Fuel Cells
Maletzko, Annabelle; Gomez Villa, Eduardo Daniel; Kintzel, Birgit; Fietzek, Harald; Schmidt, Gordon; Christen, Jürgen; Veit, Peter; Kühne, Philipp; Melke, Julia
Zeitschriftenaufsatz
Journal Article
2023 Investigation of load-temperature balancing of the operation of commercial HT-PEMFC stacks with reformed logistic fuels
Cremers, Carsten; Bürger, Stefan
Vortrag
Presentation
2023 Investigation of programmable friction with ionic liquid mixtures at the nano- and macroscales
Gatti, Felix; Cai, Wanhao; Herzog, Richard; Gharavian, Amirmasoud; Kailer, Andreas; Baltes, Norman; Rabenecker, Peter; Mörchel, Philipp; Balzer, Bizan N.; Amann, Tobias; Rühe, Jürgen
Zeitschriftenaufsatz
Journal Article
2023 Investigation of the Effect of Airborne Contaminants on PEM Fuel Cell Stack Performance and Degradation Using Electrochemical Impedance Spectroscopy, AVL Thda™ and FTIR Gas Analyzer
Özel, Tansu; Bürger, Stefan; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2023 Investigation of the Effect of Airborne Contaminants on PEM Fuel Cell Stack Performance and Degradation Using Electrochemical Impedance Spectroscopy, AVL Thda™ and FTIR Gas Analyzer
Özel, Tansu; Bürger, Stefan; Cremers, Carsten
Vortrag
Presentation
2023 Investigation of the Effect of Graphite Bipolar Plate Flow Channel Inhomogeneities and Faults on HT-PEM Fuel Cell Stack Performance
Özel, Tansu; Kraft, Samuel; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2023 Investigation of the Effect of Graphite Bipolar Plate Flow Channel Inhomogeneities and Faults on HT-PEM Fuel Cell Stack Performance
Özel, Tansu; Kraft, Samuel; Cremers, Carsten
Vortrag
Presentation
2023 Investigation of the Influence of Silicon Oxide Content on Electrolyte Degradation, Gas Evolution, and Thickness Change in Silicon Oxide/Graphite Composite Anodes for Li-Ion Cells Using Operando Techniques
Heugel, Philipp; Petit, Tim Jan; Klein, Franziska; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2023 Investigations of the microstructure of pressed explosive/wax/graphite granulates by means of X-ray diffraction
Herrmann, Michael; Gerber, Peter
Konferenzbeitrag
Conference Paper
2023 Konzeption eines Kunststoff-Metall-Hybridgehäuses für einen ressourcenschonenden Elektromotor
Biagetti, Marco
Bachelor Thesis
2023 Konzeption und Vorversuche für einen kunststoffumspritzten Elektromotor mit innenliegender Statorkühlung
Spanu, Luca
Master Thesis
2023 Life cycle Gaps of RFBs: The Potential for Improving Circularity
Dieterle, Michael
Vortrag
Presentation
2023 Liquid s-triazine phosphonates as flame retardants for polyurethane foams
Vogt, C.; Höhne, Carl-Christoph; Limburger, Jennifer; König, A.; Wagener, T.; Kroke, E.
Poster
2023 Mass transport limitations in concentrated aqueous electrolyte solutions: Theoretical and experimental study of the hydrogen-bromine flow battery electrolyte
Wlodarczyk, Jakub K.; Baltes, Norman; Friedrich, Andreas K.; Schumacher, Jürgen O.
Zeitschriftenaufsatz
Journal Article
2023 Material Properties and Recycling of Nylon 6-based Profiles
Wilhelm, Michael Leander
Vortrag
Presentation
2023 Material stability studies by means of temperature and pressure resolved X-ray diffraction
Seidel, Claudia; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2023 Metallic Fuselage Demonstrator: Impact Projection for Surface Treatment
Nioac de Salles, Ana Claudia; Renn, Hannah; Reichert, Thomas; Karanika, Alexandra
Poster
2023 Microstructural and mechanical characterization of Na1+xHf2Si2.3P0.7O10.85+0.5x and Na1+xZr2P3-xSixO12 NASICON-type solid electrolytes
Gross, Jürgen Peter; Dück, Gerald; Schäfer, Frank; Holzapfel, Michael; Finsterbusch, Martin; Malzbender, Jürgen; Schwaiger, Ruth
Zeitschriftenaufsatz
Journal Article
2023 Mikrowellenbasiertes Lösen von zweilagigen Polyurethan- und Epoxid-Bodenbeschichtungen
Ruf, Maximilian
Master Thesis
2023 Modeling and Simulation of Heterogeneous Propellant Combustion to Investigate the Influence on Gun Performance
Lietz, Martin
Konferenzbeitrag
Conference Paper
2023 Modeling and Simulation of Heterogeneous Propellant Combustion to Investigate the Influence on Gun Performance
Lietz, Martin
Vortrag
Presentation
2023 Modeling and Simulation of Heterogeneous Propellant Combustion to Investigate the Influence on Gun Performance
Lietz, Martin
Poster
2023 Modeling and Simulation of the Combustion of Heterogeneous Solid Gun Propellant in Closed Vessels
Lietz, Martin
Konferenzbeitrag
Conference Paper
2023 Modellierung und Simulation des Abbrandes heterogen strukturierter und komplex geformter Treibladungspulver zur Leistungssteigerung von Rohrwaffensystemen
Lietz, Martin
Vortrag
Presentation
2023 Modelling and simulation of isochoric propellant deflagration with LS-DYNA
Baust, Tobias Michael; Tomaschewski, Daniel
Konferenzbeitrag
Conference Paper
2023 Molecular Dynamic Simulations for Stability Prediction of Energetic Cocrystals
Possel, Clemens; Lang, Johannes; Herrmann, Michael
Vortrag
Presentation
2023 Molecular Simulation of the Stability and Thermal Behavior of the Cocrystal CL-20/HMX using LAMMPS and the Force Field ReaxFF
Possel, Clemens; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2023 Multiphasen Simulation des stationären Abbrands von ADN-basierten Raketentreibstoffen
Pietrek, Philip
Vortrag
Presentation
2023 New approach for electric vehicle composite battery housings: Electromagnetic shielding and flame retardancy of PUR/UP-based sheet molding compound
Höhne, Carl-Christoph; Ilinzeer, Sergej
Poster
2023 New approach for electric vehicle composite battery housings: Electromagnetic shielding and flame retardancy of PUR/UP-based sheet moulding compound
Höhne, Carl-Christoph; Blaess, Philipp; Ilinzeer, Sergej; Griesbaum, Patrick
Zeitschriftenaufsatz
Journal Article
2023 New Initiation Methods for Thermal Propagation Tests of Traction Li-Storages
Gyulai, Tamas; Knapp, Sebastian; Mock, Sebastian; Pacner, Daniel; Scharner, Sebastian
Konferenzbeitrag
Conference Paper
2023 New Life Cycle Inventories of materials used in composite aircraft structures
Gromer, Gabriela; Nioac de Salles, Ana Claudia; Brantsch, Peter; Reichert, Thomas; Pohsner, Ute
Poster
2023 Optimal design and operation of reactive extrusion processes: Application to the production and scale-up of polyurethane rheology modifiers for paints
Cegla, Maximilian; Fage, Aleksandra; Kemmerling, Simon; Engell, Sebastian
Zeitschriftenaufsatz
Journal Article
2023 Optimierung einer Messmethode für Detonationsgeschwindigkeiten
Fischer, Tobias
Bachelor Thesis
2023 Optimizing processing parameters for glass fiber reinforced polycarbonate LFT-D composites
Schelleis, Christoph; Hrymak, Andrew; Henning, Frank
Vortrag
Presentation
2023 Optimizing processing parameters for glass fiber reinforced polycarbonate LFT-D composites
Schelleis, Christoph; Hrymak, Andrew; Henning, Frank
Vortrag
Presentation
2023 Pair distribution function analysis of ammonium nitrate-comparison of PDF- and Rietveld-analysis
Kempa, Paul Bernd; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2023 Parameter tuning in microfluidic flow-focusing droplet generators for tailored ADN Emulsions
Radulescu, Ligia Johanna
Konferenzbeitrag
Conference Paper
2023 Permeability and fabric compaction in forming of fiber metal laminates
Kruse, Moritz; Poppe, Christian T.; Henning, Frank; Ben Khalifa, Noomane
Zeitschriftenaufsatz
Journal Article
2023 Plastic Extrusion Process Optimization by Inversion of Stacked Autoencoder Classification Machines
Burr, Julia; Katsaouni, Nikoletta; Just, Daniel; Sarishvili, Alex; Moser, Kevin
Zeitschriftenaufsatz
Journal Article
2023 Polyurethane seating structure for aviation applications - environmental improvements
Höhne, Carl-Christoph; Hanich-Spahn, Ronny; Brantsch, Peter; Nioac de Salles, Ana Claudia; Ilinzeer, Sergej; Emmerich, Rudolf; Reichert, Thomas
Poster
2023 Process Development and Characterization of a Locally Reinforced Thermoplastic Sheet Molding Compound
Ilinzeer, Sergej; Wilhelm, Michael Leander; Scheuring, Benedikt M.; Henning, Frank
Vortrag
Presentation
2023 Process Development and Characterization of a Locally Reinforced Thermoplastic Sheet Molding Compound
Ilinzeer, Sergej; Wilhelm, Michael Leander; Scheuring, Benedikt M.; Henning, Frank
Vortrag
Presentation
2023 Programming shape morphing in metamaterials
Wenz, Franziska; Lichti, Tobias; Schwarz, Angelika; Leichner, Alexander; Andrä, Heiko; Hübner, Christof; Eberl, Christoph
Konferenzbeitrag
Conference Paper
2023 Prototype fabrication of complex cooling channels by potting, additively manufactured inserts in an electric motor
John, Leonard Stefan; Reuter, Steffen; Becker, Dina; Möhring, Hans-Christian; Eisseler, Rocco; Doppelbauer, Martin
Konferenzbeitrag
Conference Paper
2023 Prozessspezifische Einflussgrößen auf die Morphologie kontinuierlich faserverstärkter thermoplastischer Halbzeuge und deren Auswirkungen auf die mechanischen Eigenschaften
Link, Tobias
Dissertation
Doctoral Thesis
2023 Pultrusion Process Simulation - Modelling of the Injection and Impregnation Chamber
Poppe, Nik; Wilhelm, Michael Leander; Kärger, Louise
Vortrag
Presentation
2023 Quality Aspects in the Compounding of Plastic Recyclate
Auer, Maximilian; Schmidt, Jannick; Diemert, Jan; Gerhardt, Gabriel; Renz, Maximilian; Galler, Viola; Woidasky, Jörg
Zeitschriftenaufsatz
Journal Article
2023 Quantum Chemistry on Quantum Computers
Possel, Clemens; Omlor, Andreas; Hahn, Walter
Poster
2023 Radiometry and Spectroscopy of Red Phosphorus Combustion Flames
Koch, Ernst-Christian; Weiser, Volker; Roth, Evelin
Konferenzbeitrag
Conference Paper
2023 Reaction kinetic handling of complex reaction behaviour in ageing of CTPB-based composite rocket propellants
Bohn, Manfred; Tussiwand, Giuseppe S.
Konferenzbeitrag
Conference Paper
2023 Realdatenbasierte Lastkollektive zur Bewertung von Umwelteinflüssen auf System- und Komponentenebene in der Fahrzeugentwicklung
Burgert, Tobias; Dillmann, Simon; Kuchenreuther-Hummel, Veronica; Heil, Moritz; Wurster, Sebastian; Berg, Lars-Fredrik
Konferenzbeitrag
Conference Paper
2023 Recovery of Precious Metals: A Promising Process Using Supercritical Carbon Dioxide and CO2-Soluble Complexing Polymers for Palladium Extraction from Supported Catalysts
Ruiu, Andrea; Li, W.S. Jennifer; Senila, Marin; Bouilhac, Cécile; Foix, Dominique; Bauer-Siebenlist, Bernhard; Seaudeau-Pirouley, Karine; Jänisch, Thorsten; Böringer, Sarah; Lacroix-Desmazes, Patrick
Zeitschriftenaufsatz
Journal Article
2023 Recycling and Circularity of Aircraft Composites
Hanich-Spahn, Ronny; Reichert, Thomas; Brantsch, Peter; Höhne, Carl-Christoph
Poster
2023 Relevance of GDL properties regarding GDL quality assurance
Cremers, Carsten
Vortrag
Presentation
2023 Resource Efficient Manufacturing of Complex Cooling Structures
John, Leonard Stefan; Becker, Dina; Reuter, Steffen; Möhring, Hans-Christian; Martin Doppelbauer; Berg, Lars-Fredrik
Konferenzbeitrag
Conference Paper
2023 Rubber Recycling of Washing Machine Gaskets
Just, Daniel; Moser, Kevin; Diemert, Jan
Zeitschriftenaufsatz
Journal Article
2023 Sicherheit der Energieversorgung von Soldat, Fahrzeug und Feldlager
Holzapfel, Michael; Gerber, Tobias
Vortrag
Presentation
2023 Silicon - an established pyrotechnic fuel as zero-carbon, high-density energy carrier
Weiser, Volker; Kelzenberg, Stefan; Koleczko, Andreas; Knapp, Sebastian; Raab, Angelika; Roth, Evelin; Schäfer, Tim
Vortrag
Presentation
2023 Simulating the Impact of Glassy Carbon Foam Electrodes on the Performance of Sodium Iodine Batteries
Gerbig, Felix; Holzapfel, Michael; Nirschl, H.
Zeitschriftenaufsatz
Journal Article
2023 Simulation der Temperatur- und Strömungsverhältnisse in einem Hochdruckautoklav vor und während des Abbrands von Raketentreibstoffproben
Kraus, Arvid
Master Thesis
2023 Simulation of the temperature and flow conditions in a high-pressure autoclave before and during the combustion of rocket propellants
Kraus, Arvid; Pietrek, Philip; Becker, Wolfgang; Knapp, Sebastian; Weiser, Volker; Gilbert, Norbert
Konferenzbeitrag
Conference Paper
2023 Simulationsgestützte Risikoanalyse zur Bewertung eines Wasserstoffmotorenprüfstandes für das Sicherheitskonzept
Wachter, Laura
Zeitschriftenaufsatz
Journal Article
2023 Spray drying of energetic materials at the example of Octogen
Busch, Konstantin; Herrmann, Michael; Maier, Marko; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2023 Sprue Recycling Conserves Resources
Maertens, Robert; Dieterle, Michael; Herrmann, Tayla; Hirz, Jan; Klaas, Dietmar
Zeitschriftenaufsatz
Journal Article
2023 Standards for Flow Batteries
Noack, Jens
Aufsatz in Buch
Book Article
2023 Statistical Simulation Development Using Example of Thermite Mixtures
Becker, Wolfgang; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2023 Storage and utilisation of the combustion heat of gas generator propellants with thermochemical heat storage systems
Sims, Stefan; Teicht, Christian
Konferenzbeitrag
Conference Paper
2023 Study on mechanical characteristics of glass fiber-reinforced polycarbonate LFT-D for codico structures
Schelleis, Christoph; Scheuring, Benedikt M.; Hrymak, Andrew; Henning, Frank
Vortrag
Presentation
2023 Study on mechanical characteristics of glass fiber-reinforced polycarbonate LFT-D for codico structures
Schelleis, Christoph; Scheuring, Benedikt M.; Hrymak, Andrew; Henning, Frank
Konferenzbeitrag
Conference Paper
2023 Surface regression model for heterogenous solid rocket motors
Moroff, Michael; Wurster, Sebastian; Pietrek, Philip
Konferenzbeitrag
Conference Paper
2023 Sustainable associative thickeners based on hydrophobically modified ethoxylated poly(hydroxy-urethane)s end-capped by long alkyl chains
Wołosz, Dominik; Fage, Aleksandra; Parzuchowski, Paweł Grzegorz; Świderska, Aleksandra; Brüll, Robert; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2023 Synthese – eine wichtige Säule der Explosivstofforschung am ICT
Keicher, Thomas; Schaller, Uwe
Vortrag
Presentation
2023 Techno-Economic Optimization of Flow Batteries Using the Optimization Potential to Prioritize Different Optimization Possibilities
Gerlach, Daniel Ulrich; Noack, Jens; Bischof, Katharina; Boulch, Chloé le; Trupp, Sabine
Zeitschriftenaufsatz
Journal Article
2023 Temperaturabhängiger Abbrand ADN-basierter Festtreibstoffe
Fischer, Sebastian; Sims, Stefan; Tagliabue, Claudio; Nickl, Daniel
Vortrag
Presentation
2023 Temperature Prediction of Automotive Battery Systems under Realistic Driving Conditions using Artificial Neural Networks
Liebertseder, Johannes; Wunsch, Susann; Sonner, Christine; Berg, Lars-Fredrik; Doppelbauer, Martin; Tübke, Jens
Konferenzbeitrag
Conference Paper
2023 The digital twin in battery cell production
Krauß, Jonathan; Schmetz, Arno; Fitzner, Antje; Ackermann, Thomas; Pouls, Kevin Bernard; Hülsmann, Tom-Hendrik; Roth, David; Gehring, Janine; Hamacher, Nils Christian; Jaspers, Wilhelm; Mohring, Leon; Rube, Natalja; Tübke, Jens; Kies, Alexander D.; Kreppein, Alexander; Abramowski, Johann-Philip; Schmitt, Robert H.; Baum, Christoph; Brandstetter, Alexander; Singh, Soumya; Cziasto, Dennis; Meyer, Olga; Kornely, Mia J. K.; Kraus, Sander; Niemietz, Philipp; Bergs, Thomas; Kampker, Achim
Paper
2023 The Path towards closed loop Recycling
Krüger, Anna; Kilian, Sascha
Zeitschriftenaufsatz
Journal Article
2023 The reaction of silicon with water and possible applications
Weiser, Volker; Cleven, Max; Juez Lorenzo, Maria del Mar; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Raab, Angelika; Roth, Evelin; Rothe, Paul Ewald
Konferenzbeitrag
Conference Paper
2023 The role of oxygen and humidity in NC decomposition
Heil, Moritz; Bohn, Manfred; Müller, Christian; Fuchs, Carla; Grunwald, Tobias
Konferenzbeitrag
Conference Paper
2023 Thermische und Flammschutzeigenschaften von Epoxy-Vitrimeren
Berner, Valeria
Master Thesis
2023 Thermoplastic Fuselage: Impact Projection for Thermoplastic Fuselage Panel
Nioac de Salles, Ana Claudia; Renn, Hannah; Reichert, Thomas; Halm, Jan; Sterk, Senne
Poster
2023 Thermoset Wing Panel: Impact Projection for Thermoset Wing Panel
Reichert, Thomas; Renn, Hannah; Idel, Snir
Poster
2023 Tribological performance of electrically conductive and self-lubricating polypropylene-ionic-liquid composites
Gatti, Samuel; Gatti, Felix; Amann, Tobias; Kailer, Andreas; Moser, Kevin; Weiss, Patrick; Seidel, Claudia; Rühe, Jürgen
Zeitschriftenaufsatz
Journal Article
2023 Untersuchung des Einflusses von GDL-Eigenschaften auf das Betriebsverhalten und die Degradation von Anionentauschermembran-Brennstoffzellen (AEMFC)
Chaker, El Mahdi
Master Thesis
2023 Vanadium Electrolytes and Related Electrochemical Reactions
Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens
Aufsatz in Buch
Book Article
2023 Verfahren zum Festlegen eines Funktionsbauteils an einem endlosfaserverstärkten Polymer-Formteil in Form eines Hohlprofils und solchermaßen erzeugtes Strukturbauteil
Henning, Frank; Anschütz, Ingo; Beck, Björn; Haas, Jonathan
Patent
2023 Vinyl acetate-ethylene as a potential alternative to fluorine free binders in supercapacitors
Baltes, Norman; Heumann, Johannes; Rabenecker, Peter; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2023 Von der Müllhalde zur Autobahn: Ecopals stellt Asphalt aus Plastikmüll her
Müller, Torsten; Varga, Jonas
Podcast
2023 Wärmetransformation durch Adsorption: Entwicklung eines neuen Messverfahrens zur Untersuchung der Adsorptionskinetik und Weiterentwicklung der Potentialtheorie zur Berechnung von Adsorptionsgleichgewichten
Teicht, Christian
Dissertation
Doctoral Thesis
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2022

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2022 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2022 3D Printed Gun Propellants based on GAP-ETPE
Mitró, Daniel; Böhnlein-Mauß, Jutta; Cäsar, Markus
Konferenzbeitrag
Conference Paper
2022 4-Amino-1-Butyl-1,2,4-Triazolium Dinitramide – Synthesis, Characterization and Combustion of a Low-Temperature Dinitramide-Based Energetic Ionic Liquid (EIL)
Schaller, Uwe; Lang, Johannes; Gettwert, Volker; Hürttlen, Jürgen; Weiser, Volker; Keicher, Thomas
Zeitschriftenaufsatz
Journal Article
2022 Additive Fertigung energetischer Materialien am Fraunhofer ICT
Mitró, Daniel; Schaller, Uwe; Böhnlein-Mauß, Jutta; Dresel, Alexander
Vortrag
Presentation
2022 ADN solid propellants with high burning rates
Sims, Stefan; Fischer, Sebastian; Tagliabue, Claudio
Konferenzbeitrag
Conference Paper
2022 ADN Solid Propellants with High Burning Rates as Booster Material for Hypersonic Applications
Sims, Stefan; Fischer, Sebastian; Tagliabue, Claudio
Zeitschriftenaufsatz
Journal Article
2022 Advanced Solution for the Desensitization of Peroxide Explosives
Wilhelm, Isabel; Wittek, Michael; Haertel, Martin; Röseling, Dirk
Konferenzbeitrag
Conference Paper
2022 Airbag 2022, 15th International Symposium and Exhibition on Sophisticated Car Safety Systems
Tagungsband
Conference Proceeding
2022 Aircraft Recycling and Circular Economy
Reichert, Thomas; Brantsch, Peter; Hanich-Spahn, Ronny; Höhne, Carl-Christoph
Vortrag
Presentation
2022 Aktuelle technische Erkenntnisse zum eHighway-System aus Feldversuch und Begleitforschung
Jöhrens, Julius; Lehmann, Michael; Bramme, Matthias; Brauer, Clemens; Bulenda, Alexander; Burghard, Uta; Kaßens-Noor, Eva; Linke, Regina; Burgert, Tobias; Öztürk, Özgür; Staub, Markus; Werner, Markus; Schöpp, Ferdinand; Wilke, Jürgen; Worbs, Markus; Doll, Claus
Bericht
Report
2022 Akustisch optimierte Polymerwerkstoffe, Komponenten und Geometrien für Kunststoffgehäuse
Rohlfing, Jens; Aoki, Yohko; Wack, Roman; Diemert, Jan
Konferenzbeitrag
Conference Paper
2022 Angussverwertung schont Ressourcen
Maertens, Robert; Dieterle, Michael; Herrmann, Tayla; Hirz, Jan; Klaas, Dietmar
Zeitschriftenaufsatz
Journal Article
2022 Anion Exchange Membranes Incorporating Multi N-Spirocyclic Quaternary Ammonium Cations via Ultraviolet-Initiated Polymerization for Zinc Slurry-Air Flow Batteries
Tsehaye, Misgina Tilahun; Choi, Nak Heon; Fischer, Peter; Tübke, Jens; Planes, Emilie; Alloin, Fannie; Iojoiu, Cristina
Zeitschriftenaufsatz
Journal Article
2022 Ansatz einer wirtschaftlichen Bewertung von Batterien im Zusammenhang mit Oberleitungs-LKW auf Basis spezifischer Fahrprofile
Hagen, Markus; Miller, Martin; Burgert, Tobias; Dollinger, Andreas
Bericht
Report
2022 Application of a Tensor Interpolation Method on the Determination of Fiber Orientation Tensors From Computed Tomography Images
Blarr, Juliane; Kresin, Noah; Krauß, Constantin; Weidenmann, Kay André; Liebig, Wilfried V.; Elsner, Peter
Konferenzbeitrag
Conference Paper
2022 Automatische Prüfung von Carbonfaser-Tape-Gelegen zur Überführung in den digitalen Zwilling
Oswald, Jan; Jungmann, Christian; Rick, Rainer; Summa, Jannik; Rabe, Ute; Koster, Dirk; Pudovikov, Sergey; Herrmann, Hans-Georg; Link, Tobias; Schlimper, Ralf; Wolf, Klaus
Konferenzbeitrag
Conference Paper
2022 Battery Tab Cooling in Traction Battery Modules using Thermally Conductive Plastics
Liebertseder, Johannes; Dollinger, Andreas; Sorg, Thomas; Berg, Lars-Fredrik; Tübke, Jens
Konferenzbeitrag
Conference Paper
2022 Behavior of ADN-prills in microfluidic emulsion crystallization process
Radulescu, Ligia Johanna; Gözek, Meliha
Konferenzbeitrag
Conference Paper
2022 Bestimmung der intrinsischen Leitfähigkeit von porösen Materialien über eine druckabhängige Messung der Leitfähigkeit und deren Simulation
Klein, Niclas Benjamin
Master Thesis
2022 Bestimmung der Prozessparameter von Zerkleinerungsprozessen für dämmstoffhaltige Kompositmaterialien
Fehn, Thomas; Elsner, Martin P.; Schweppe, Rainer; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2022 Bitte Ruhe - Projekt "PolymerAkustik": Ganzheitliche Lösungsansätze für leise Kunststoffbauteile
Diemert, Jan; Hohe, Jörg; Rohlfing, Jens; Troge, Jan
Zeitschriftenaufsatz
Journal Article
2022 Breakthrough Screening of Porous Materials: A Simple and Effective Tool for Database Generation
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Werner, David; Ahlhelm, Matthias; Richter, Hans-Jürgen
Zeitschriftenaufsatz
Journal Article
2022 Brennstoffzellen-Technologien
Groos, Ulf; Cremers, Carsten; Nousch, Laura; Baumgärtner, Christoph
Aufsatz in Buch
Book Article
2022 CaproPULL - Entwicklung digitalisierter Anlagen- und Werkzeugtechnik mit Prozessdatenanalyse für die Pultrusion von nachhaltigen, rezyklierbaren Leichtbaustrukturen
Wilhelm, Michael Leander; Rosenberg, Philipp
Zeitschriftenaufsatz
Journal Article
2022 CFRP Recycling Demonstrator for Engine Application
Hanich-Spahn, Ronny; Moll, Torsten
Vortrag
Presentation
2022 Chemical Recycling of Carbon Fibre Reinforced Polyurethane for Aviation Applications
Hanich-Spahn, Ronny; Brantsch, Peter; Höhne, Carl-Christoph; Reichert, Thomas
Vortrag
Presentation
2022 Circularity of consumer electronics within Life Cycle Gap Analysis
Dieterle, Michael; Lätsch, Corinna; Brantsch, Peter; Nioac de Salles, Ana Claudia
Konferenzbeitrag
Conference Paper
2022 Continuous flow synthesis of dichloroglyoxime
Lieber, Patrick
Konferenzbeitrag
Conference Paper
2022 Crystallisation Behavior of ADN Droplets in Microfluidic Emulsion Crystallisation Process
Radulescu, Ligia Johanna; Gözek, Meliha
Konferenzbeitrag
Conference Paper
2022 Der Gestank soll drinnen bleiben
Höhne, Carl-Christoph; Menrath, Andreas; Pfaendner, Rudolf; Metzsch-Zilligen, Elke; Lok, Bianca
Zeitschriftenaufsatz
Journal Article
2022 Design of an Additive Manufactured Natural Gas Engine with Thermally Conditioned Active Prechamber
Bucherer, Sebastian; Rothe, Paul Ewald; Kraljevic, Ivica; Kollmeier, Hans-Peter; Vacca, Antonino; Chiodi, Marco; Kulzer, Andre Casal; Ruhland, Helmut; Breuer, Albert
Vortrag
Presentation
2022 Development of a direct injection molding process for the production of long glass fiber-reinforced phenolic resins components
Maertens, Robert; Liebig, Wilfried V.; Weidenmann, K.A.; Elsner, Peter
Konferenzbeitrag
Conference Paper
2022 Development of a Parallel Product-Production Co-design for an Agile Battery Cell Production System
Ruhland, J.; Storz, T.; Kößler, F.; Ebel, A.; Sawodny, J.; Hillenbrand, J.; Gönnheimer, P.; Overbeck, L.; Lanza, G.; Hagen, M.; Tübke, J.; Gandert, J.; Paarmann, S.; Wetzel, T.; Mohacsi, J.; Altvater, A.; Spiegel, S.; Klemens, J.; Scharfer, P.; Schabel, W.; Nowoseltschenko, K.; Müller-Welt, P.; Bause, K.; Albers, A.; Schall, D.; Grün, T.; Hiller, M.; Schmidt, A.; Weber, A.; Biasi, L. de; Ehrenberg, H.; Fleischer, J.
Konferenzbeitrag
Conference Paper
2022 Development of a scalable fabrication concept for sustainable, programmable shape-morphing metamaterials
Schwarz, Angela; Lichti, Tobias; Wenz, Franziska; Scheuring, Benedikt M.; Hübner, Christof; Eberl, Christoph; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2022 Development of an Injection Molding Process for Long Glass Fiber-Reinforced Phenolic Resins
Maertens, Robert; Liebig, Wilfried; Weidenmann, Kay A.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2022 Development of High Temperature Resistant Stereocomplex PLA for Injection Moulding
Körber, Sebastian; Moser, Kevin; Diemert, Jan
Zeitschriftenaufsatz
Journal Article
2022 Development perspectives for lithium-ion battery cell formats
Link, Steffen; Neef, Christoph; Wicke, Tim; Hettesheimer, Tim; Diehl, Marcel; Krätzig, Oliver; Degen, Florian; Klein, Franziska; Fanz, Patrik; Burgard, Matthias; Kleinert, Ricardo
Studie
Study
2022 Digitalisierung und Simulation von Wasserstofftechnologien
Schattauer, Sylvia; Spieß, Alexander; Martin, Alexander; Burlacu, Robert; Herz, Gregor; Leithäuser, Christian; Beyer, Ulrike; Seidelmann, Joachim; Frank, Fabian
Aufsatz in Buch
Book Article
2022 Digitalization and simulation of hydrogen technologies
Schattauer, Sylvia; Spieß, Alexander; Martin, Alexander; Burlacu, Robert; Herz, Gregor; Leithäuser, Christian; Beyer, Ulrike; Seidelmann, Joachim; Frank, Fabian
Aufsatz in Buch
Book Article
2022 Doing it more sustainable - In-situ pultrusion of profiles based on PA6
Wilhelm, Michael Leander
Vortrag
Presentation
2022 Downscaling the Methodology for Determining Detonation Velocities Applied to small sample Quantities of Explosives
Baust, Tobias Michael
Konferenzbeitrag
Conference Paper
2022 EcoDESIGN in Next Generation Aircraft Fuselage: EcoDesign approaches for Multifunctional Fuselage Demonstrator
Solares-Canal, Marta; Costa Lopez, Laura; Herrmann, Ralf; Wölcken, Piet-Christof; Moll, Torsten; Höhne, Carl-Christoph; Brantsch, Peter
Vortrag
Presentation
2022 Effect of mechanical impact on PBX disk investigated by DMA
Bohn, Manfred; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2022 Effect of mechanical impact on PBX disks investigated by DMA
Bohn, Manfred; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2022 Effects of salinity and temperature on seawater dissolution rate of initial detonation agent mercury fulminate
Gosnell, Kathleen J.; Beck, Aaron Joseph; Müller, Paul; Keßler, Armin; Achterberg, Eric P.
Zeitschriftenaufsatz
Journal Article
2022 Einfluss der Prozessparameter auf Morphologie und Mechanik beim Schmelzimprägnieren faserverstärkter thermoplastischer Tapes
Kröper, Marlen
Master Thesis
2022 Einsatz von Wasserstofftechnologien in Mobilität und Transport
Bürger, Stefan; Horch, Felix; Geiling, Johannes; Öchsner, Richard; Kolb, Gunther; Groos, Ulf; Semmel, Malte; Schaadt, Achim; Köhler, Jonathan
Aufsatz in Buch
Book Article
2022 Energetic Materials - Exploring and Understanding
Tagungsband
Conference Proceeding
2022 Enthalpies of Formation for a Selection of Newer and Conventional Stabilizers and Reaction Enthalpies for their Stabilization Action in Nitrocellulose
Omlor, Andreas; Bohn, Manfred
Konferenzbeitrag
Conference Paper
2022 Entwicklung des Verarbeitungsschritts vom MOF zum geträgerten Katalysator mittels Elektrospinning
Alvarez, Macarena
Master Thesis
2022 Entwicklung einer schnellen Hyperspektralkamera auf Basis zirkular variabler Verlaufsfilter
Schreiber, Achim
Dissertation
Doctoral Thesis
2022 Entwicklung eines elektronischen Laborbuchs mit Datenbankanbindung
Moog, Hannah
Bachelor Thesis
2022 Entwicklung und Validierung eines CAM-Werkzeugs zur automatisierten Roboterprogrammierung für die 3DSW
Kraft, Julian
Master Thesis
2022 Entwicklung und Validierung eines modularen Systems zur Generierung variabler Pulsationen für die Erprobung von heißgasführenden Komponenten
Heß, Stefan
Dissertation
Doctoral Thesis
2022 Environmental Improvement Potential of Flexible Polyurethane Foam for Aviation Applications - A Case Example Analysis
Brantsch, Peter; Nioac de Salles, Ana Claudia; Hanich-Spahn, Ronny; Höhne, Carl-Christoph; Reichert, Thomas
Vortrag
Presentation
2022 Erosion test facility for small caliber gun barrels
Kuchenreuther-Hummel, Veronica; Lietz, Martin
Konferenzbeitrag
Conference Paper
2022 Examination of Cesium Dinitramide as a Pyrotechnic Oxidizer
Roth, Evelin; Knapp, Sebastian; Raab, Angelika; Weiser, Volker
Konferenzbeitrag
Conference Paper
2022 Experimental and Numerical Analysis of SMC Compression Molding in Confined Regions - A Comparison of Simulation Approaches
Rothenhäusler, Florian; Meyer, Nils; Wehler, Simon; Hohberg, Martin; Gude, Maik; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2022 Experimentelle Untersuchung der Grenzflächenfestigkeit bei PLA-Sandwichstrukturen zwischen Schaumkern und Decklagen
Fricker, Laura
Master Thesis
2022 Experimentelle Untersuchung des Einflusses verschiedener Prozess- und Gestaltungsparameter auf die Lagenanordnung in der 3D Skelett Wickeltechnik
Krüger, Anna
Master Thesis
2022 Family Tree for Aqueous Organic Redox Couples for Redox Flow Battery Electrolytes: A Conceptual Review
Fischer, Peter; Mazúr, Petr; Krakowiak, Joanna
Zeitschriftenaufsatz
Journal Article
2022 FFF 3D Printing of Small Porous Structures from Polymer Compounds Using the Ultimaker 3
Ernst, Matthias F.; Maletzko, Annabelle; Baumann, Sascha; Baumann, Nils; Hübner, Christof; Höhne, Carl-Christoph
Zeitschriftenaufsatz
Journal Article
2022 Fiber breakage modeling based on hydrodynamic Forces in macroscopic process simulations
Wittemann, Florian; Maertens, Robert; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2022 Finite element solution of electro-magnetic-thermo-chemical problem in microwave assisted pultrusion processes
Barkanov, Evgeny; Akishin, Pavel; Namsone-Sile, Endija; Emmerich, Rudolf; Graf, Matthias
Zeitschriftenaufsatz
Journal Article
2022 Flame and Fire Protection for eMobility
Höhne, Carl-Christoph; Gettwert, Volker; Menrath, Andreas; Frank, Fabian; Abert, Michael; Liebertseder, Johannes
Zeitschriftenaufsatz
Journal Article
2022 Flame retardancy investigations on composites for lightweight electric vehicle battery housings
Höhne, Carl-Christoph; Gettwert, Volker; Menrath, Andreas
Poster
2022 Flame retardant investigations on carbon fibre‐reinforced polyurethane resin parts for aircraft applications produced by wet compression moulding
Behnisch, Felix; Höhne, Carl-Christoph; Manas, Lukas; Rosenberg, Philipp; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2022 Flamm- und Brandschutz für die Elektromobilität
Höhne, Carl-Christoph; Gettwert, Volker; Menrath, Andreas; Frank, Fabian; Abert, Michael; Liebertseder, Johannes
Zeitschriftenaufsatz
Journal Article
2022 Flammschutzmittel auf Basis von phosphorhaltigen s-Triazinverbindungen
Vogt, Claudia; Höhne, Carl-Christoph; König, Alexander; Wagener, Tobias; Kroke, Edwin
Vortrag
Presentation
2022 Flow-induced fiber displacement in non-bindered UD-NCF during Wet Compression Molding
Albrecht, Fabian; Poppe, C.; Tiemann, T.; Sauerwein, V.; Rosenberg, Philipp; Henning, F.
Zeitschriftenaufsatz
Journal Article
2022 Following Adsorbed Intermediates on a Platinum Gas Diffusion Electrode in H3PO3-Containing Electrolytes Using In Situ X-ray Absorption Spectroscopy
Gomes, Bruna F.; Prokop, Martin; Bystron, Tomas; Loukrakpam, Rameshwori; Melke, Julia; Lobo, Carlos M.S.; Fink, Michael; Zhu, Mengshu; Voloshina, Elena; Kutter, Maximilian; Hoffmann, Hendrik; Yusenko, Kirill V.; Buzanich, Ana Guilhermeg; Röder, Bettina; Bouzek, Karel; Paulus, Beate; Roth, Christina
Zeitschriftenaufsatz
Journal Article
2022 Functionalization of in-situ pultruded parts to enable sustainable lightweight design - insight into the joint R&D projects of comprisetec
Klis, Laura; Wilhelm, Michael Leander; Keun, Christian A.; Riecken, Björn; Wruck, Lorenz
Vortrag
Presentation
2022 Ganzheitliche Entwicklungsmethodik für Leichtbauansätze
Bucherer, Sebastian; Liebertseder, Johannes; Reuter, Steffen; Heß, Stefan; Berg, Lars-Fredrik; Zabirov, Alexander
Zeitschriftenaufsatz
Journal Article
2022 Gate‐to‐Gate Study for Collaborative Robot‐Assisted Composite Parts Manufacturing Using a Work Effort Unit Approach
Nioac de Salles, Ana Claudia; Reichert, Thomas; Ruiz, Ana Maria; Cordero, Jorge
Zeitschriftenaufsatz
Journal Article
2022 Harter Knochen - Mechanisches Recycling von in-situ pultrudierten PA6 Profilen
Wilhelm, Michael Leander
Zeitschriftenaufsatz
Journal Article
2022 Herstellung eines bistabilen Metamaterials für die Entwicklung programmierbarer Materialien durch Thermoformen
Vogelmann, Patricia
Bachelor Thesis
2022 Hierarchical Approach for Solvent Selection in Circular Economy
Majgaonkar, Pranav; Kruber, Kai; Aryan, Venkat; Hanich, Ronny; Pico, Davide; Skiborowski, Mirko
Konferenzbeitrag
Conference Paper
2022 Hot-Spot-Modelling to Simulate the Influence of Particle Properties on Ignition of Solid Propellants
Kelzenberg, Stefan; Weiser, Volker; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2022 How odour-contaminated plastics find their way into new applications
Metzsch-Zilligen, Elke; Höhne, Carl-Christoph
Vortrag
Presentation
2022 Hydrogen technologies in mobility and transportation
Groos, Ulf; Semmel, Malte; Schaadt, Achim; Bürger, Stefan; Horch, Felix; Geiling, Johannes; Öchsner, Richard; Kolb, Gunther; Köhler, Jonathan
Aufsatz in Buch
Book Article
2022 Improved Burn Rate Measurement of Deterred Gun Propellants with Multivariate Size Distribution
Wurster, Sebastian; Lietz, Martin; Winter, Andreas
Zeitschriftenaufsatz
Journal Article
2022 Improved Thermal Switch Based on an Adsorption Material in a Heat Pipe
Winkler, Markus; Schipper, Jan; Teicht, Christian; Corhan, Patrick; Polyzoidis, Angelos; Bartholome, Kilian; Schäfer-Welsen, Olaf; Pappert, Sandra
Zeitschriftenaufsatz
Journal Article
2022 Improvement of safe bromine electrolytes and their cell performance in H2/Br2 flow batteries caused by tuning the bromine complexation equilibrium
Küttinger, Michael; Riasse, Raphaël; Wlodarczyk, Jakub K.; Fischer, Peter; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2022 In-situ-Pultrusion of ε-caprolactam with glass- and carbon-fibers, producing profiles based on PA6 (thermoplastic)
Wilhelm, Michael Leander
Vortrag
Presentation
2022 Influence of Composition and Pressure on the Reaction Behaviour of Ternary Thermite Mixtures Containing AL/MOO3/WO3
Weiser, Volker; Mosinzny, Maria; Knapp, Sebastian; Roth, Evelin; Kelzenberg, Stefan
Konferenzbeitrag
Conference Paper
2022 Influence of fiber breakage on flow behavior in fiber length- and orientation-dependent injection molding simulations
Wittemann, Florian; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2022 Influence of the shock pulse duration Definition on the Location of the Initiation Threshold in the James Criterion
Zimmermann, Claudius; Wurster, Sebastian
Konferenzbeitrag
Conference Paper
2022 Investigation of the Combustion of Silicon Particles in Air and their Reaction Products
Schäfer, Tim; Weiser, Volker; Raab, Angelika; Roth, Evelin; Bieroth, Diana; Koleczko, Andrzej; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2022 Investigation of the effects from different materials on the catalytic layer in an AEM Electrolysis Cell
Brösgen, Linda; Cremers, Carsten; Melke, Julia
Poster
2022 Investigations to the Effect of Preheating the Resin on the Pultrusion Process
Emmerich, Rudolf; Wilhelm, Michael Leander; Rosenberg, Philipp; Henning, Frank
Konferenzbeitrag
Conference Paper
2022 Keeping the Smell in
Höhne, Carl-Christoph; Menrath, Andreas; Pfaendner, Rudolf; Metzsch-Zilligen, Elke; Lok, Bianca
Zeitschriftenaufsatz
Journal Article
2022 Keeping the smell in Method to prevent odor emission from plastic recyclates
Höhne, Carl-Christoph; Pfaendner, Rudolf; Metzsch-Zilligen, Elke; Lok, Bianca
Poster
2022 Kinetic data on the thermal decomposition of RDX in the processing solvents cyclohexanone and gamma-butyrolactone determined with ARC and heat flow microcalorimetry
Bohn, Manfred
Konferenzbeitrag
Conference Paper
2022 Klimafreundliche Nutzfahrzeuge. Vergleich unterschiedlicher Technologiepfade für CO2-neutrale und -freie Antriebe
Bensmann, Boris; Benz, Thomas; Brandt, T.; Grube, Thomas; Kleimaier, Martin; Konstantinidou, Eleni; Meyer, Stefan; Pokojski, Martin; Samsun, Renzi Can; Schlosser, Gerhard; Cremers, Carsten
Studie
Study
2022 Konzeptionierung und Entwicklung einer Vorrichtung zur realitätsnahen Nachbildung von Antriebslasten elektrischer Flugantriebe
Koleczko, Rubens
Master Thesis
2022 Kunststoffe physikalisch recyceln
Mikonsaari, Irma; Walle, Elke Van de; Moser, Kevin
Zeitschriftenaufsatz
Journal Article
2022 LCA und EoL - Zur Behandlung des Produktlebensendes in Ökobilanzen und dessen tatsächlichen Einfluss auf die Gesamtbilanz
Herrmann, Tayla
Bachelor Thesis
2022 Leichtbau für Schwergewichte
Berg, Lars-Fredrik; Liebertseder, Johannes; Menrath, Andreas; Rosenberg, Philipp
Zeitschriftenaufsatz
Journal Article
2022 Life cycle (gap) analysis for advanced material recycling of PLA cups
Dieterle, Michael; Ginter, Jannis
Zeitschriftenaufsatz
Journal Article
2022 Life cycle assessment (LCA) for flow batteries: A review of methodological decisions
Dieterle, Michael; Fischer, Peter; Pons, Marie-Noëlle; Blume, Nick; Minke, Christine; Bischi, Aldo
Zeitschriftenaufsatz
Journal Article
2022 Life Cycle Gap Analysis for Product Circularity and Sustainability - a Case Study with Three Different Products
Dieterle, Michael; Viere, Tobias
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica
Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2022 Lithium recovery from geothermal brine - an investigation into the desorption of lithium ions using manganese oxide adsorbents
Herrmann, Laura; Ehrenberg, Helmut; Graczyk-Zajac, Magdalena; Kaymakci, Elif; Kölbel, Thomas; Kölbel, Lena; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2022 Machbarkeitsstudie: Thermoplastische Ligninvarianten als Teilsubstitut in Bitumenformulierungen für verschiedene Bauleistungen (Lignobitumen)
Bericht
Report
2022 Measurement of the helicity dependence for single π0 photoproduction from the deuteron
Cividini, Federico; Dieterle, Michael; Abt, S.; Achenbach, Patrik; Adlarson, P.; Afzal, F.; Ahmed, Zafar; Annand, John R.M.; Arends, Hans Jürgen; Bashkanov, Mikhail; Beck, Reinhard; M. Biroth; Borisov, N.; Braghieri, A.; Briscoe, W.J.; Collicott, Cristina; Costanza, Susanna; Denig, A.; Dolzhikov, A.S.; Downie, E.J.; Drexler, P.; Fegan, Suzanne; Fix, A.; Gardner, S.; Ghosal, D.; Glazier, D.I.; Gorodnov, I.; Gradl, W.; Günther, M.; Gurevich, D.; Heijkenskjöld, L.; Hornidge, D.; Huber, G.M.; Käser, A.; Kashevarov, V.L.; Kay, S.J.D.; Korolija, M.; Krusche, B.; Lazarev, A.; Livingston, K.; Lutterer, S.; MacGregor, I.J.D.; Manley, D.M.; Martel, P.P.; Miskimen, R.; Mocanu, M.; Mornacchi, E.; Mullen, C.; Neganov, A.; Neiser, A.; Ostrick, M.; Paudyal, D.; Pedroni, P.; Powell, A.; Rostomyan, T.; Sokhoyan, V.; Spieker, K.; Steffen, O.; Strakovsky, I.; Strub, T.; Thiel, A.; Thiel, M.; Thomas, A.; Usov, Yu.A.; Wagner, S.; Watts, D.P.; Werthmüller, D.; Wettig, J.; Witthauer, L.; Wolfes, M.; Zachariou, N.
Zeitschriftenaufsatz
Journal Article
2022 Mechanisches Recycling von In-situ-Pultrusions-Profilen am Beispiel der Materialkombination PA6 und Glasfaser
Kummert, Henrik Hans
Bachelor Thesis
2022 Melt Crystallization of Ammonium Dinitramide Mixtures with Nucleation Additives: Structure Analysis by Means of X-Ray Diffraction in Addition with Imaging Methods
Seidel, Claudia; Herrmann, Michael; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2022 Melt crystallization of ammonium dinitramide suspensions with additives investigated by means of X-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2022 Microplastics persist in an arable soil but do not affect soil microbial biomass, enzyme activities, and crop yield
Schöpfer, Lion; Möller, Julia N.; Steiner, Thomas; Schnepf, Uwe; Marhan, Sven; Resch, Julia; Bayha, Ansilla; Löder, Martin G.J.; Freitag, Ruth; Brümmer, Franz; Laforsch, Christian; Streck, Thilo; Forberger, Jens; Kranert, Martin; Kandeler, Ellen; Pagel, Holger
Zeitschriftenaufsatz
Journal Article
2022 Microstructure of Aluminum Hydride and Stabilization Concepts
Herrmann, Michael; Förter-Barth, Ulrich; Weyrauch, Hubert; Juez Lorenzo, Maria del Mar; Kempa, Paul Bernd
Konferenzbeitrag
Conference Paper
2022 Mikrokunststoffe in Komposten und Gärprodukten aus Bioabfallverwertungsanlagen und deren Eintrag in landwirtschaftlich genutzte Böden - Erfassen, Bewerten, Vermeiden
Forberger, Jens; Bayha, Ansilla; Gromer, Gabriela; Möller, Julia; Löder, Martin; Lafrosch, Christian; Steiner, Thomas; Freitag, Ruth; Schöpfer, Lion; Pagel, Holger; Marhan, Sven; Streck, Thilo; Kandeler, Ellen; Schnepf, Uwe; Moers-Meßmer, Maria Anna Lioba von; Abdi, Rahma; Kneißle, Lea; Budig, Vivian; Brümmer, Franz; Resch, Julia; Bonten, Christian; Mendez, Hildemar; Clauß, Detlef; Kranert, Martin
Bericht
Report
2022 Mikrowellengeheizte Adsorber auf Basis molekular geprägter Polymere für großvolumige Anwendungen
Heil, Moritz
Dissertation
Doctoral Thesis
2022 Miniaturisierte und markierungsfreie Analyse einzelner Mikrofluidsegmente unter Einsatz der oberflächenverstärkten Raman-Spektroskopie
Mendl, Alexander
Dissertation
Doctoral Thesis
2022 Modification of Ammonium Dinitramide (ADN) by Co-Crystallization with Crown Ether
Dresel, Alexander; Herrmannsdörfer, Dirk; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2022 Near infrared spectra of metal / metal oxide particle systems and analysis with principle component analysis (PCA). Optimizing thermite systems
Becker, Wolfgang; Knapp, Sebastian; Klemenz, Melanie; Kelzenberg, Stefan
Konferenzbeitrag
Conference Paper
2022 Neural Network aided burning Rate Determination of Energetic Materials
Langer, Jan; Knapp, Sebastian; Becker, Wolfgang; Imiolek, Andreas
Konferenzbeitrag
Conference Paper
2022 New Concept of Electronically and Protonic Conductive Polymer Structures for the Proton Exchange Membrane Water Electrolysis Produced by 3D-Printing
Maletzko, Annabelle; Melke, Julia; Hübner, Christof; Höhne, Carl-Christoph
Vortrag
Presentation
2022 New Concept of Electronically and Protonic Conductive Polymer Structures for the Proton Exchange Membrane Water Electrolysis Produced by Additive Manufacturing
Maletzko, Annabelle; Brösgen, Linda; Tchoffo Kaffo, Christian; Gomez Villa, Eduardo Daniel; Melke, Julia; Hübner, Christof; Höhne, Carl-Christoph
Zeitschriftenaufsatz
Journal Article
2022 New Life Cycle Inventories of chemicals used in the production of airframe parts
Nioac de Salles, Ana Claudia; Lätsch, Corinna; Brantsch, Peter; Gromer, Gabriela; Pohsner, Ute
Poster
2022 Non-isothermal direct bundle simulation of SMC compression molding with a non-Newtonian compressible matrix
Meyer, Nils; Ilinzeer, Sergej; Hrymak, Andrew Nick; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2022 Optimal design of shape changing mechanical metamaterials at finite strains
Lichti, Tobias; Leichner, Alexander; Andrä, Heiko; Müller, Ralf; Wenz, Franziska; Eberl, Christoph; Schwarz, Angela; Hübner, Christof
Zeitschriftenaufsatz
Journal Article
2022 Pair Distribution Function Analysis of Ammonium Nitrate-Comparison of PDF- and Rietveld-Analysis
Kempa, Paul Bernd; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2022 Phlegmatization of TATP and HMTD with Activated Charcoal as Training Aid for Explosive Detection Dogs
Wilhelm, Isabel; Bikelyte, Greta; Wittek, Michael; Härtel, Martin Andreas Christian; Röseling, Dirk; Klapötke, Thomas Matthias
Zeitschriftenaufsatz
Journal Article
2022 Physical Recycling of Plastics
Mikonsaari, Irma; Walle, Elke Van de; Moser, Kevin
Zeitschriftenaufsatz
Journal Article
2022 PP-GF-EPP sandwich structures as housing materials for rechargeable energy storage system of electric vehicles: Investigations into flame retardancy
Höhne, Carl-Christoph; Gettwert, Volker; Kilian, Sascha; Tillner, Benjamin; Jahn, Ivonne; Menrath, Andreas
Zeitschriftenaufsatz
Journal Article
2022 Prediction of Gaps in Automated Tape Laying and their Influence on Porosity in Consolidated Laminates
Link, Tobias; Rosenberg, Philipp; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2022 Prediction of the Enthalpy of Formation by DFT (Density Functional Theory) Calculations
Omlor, Andreas; Bohn, Manfred; Lang, Johannes
Konferenzbeitrag
Conference Paper
2022 Preparation of Trace Explosives Standards by Advanced Inkjet Printing
Ulrich, Christian; Müller, Stefan; Wolf, Gabriela; Deimling, Jutta; Schweikert, Wenka; Schnürer, Frank
Konferenzbeitrag
Conference Paper
2022 Pressurized Silicon Combustion for Pyrotechnic and Energetic Use
Weiser, Volker; Juez Lorenzo, Maria del Mar; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Kuchenreuther-Hummel, Veronica; Roth, Evelin; Schäfer, Tim
Konferenzbeitrag
Conference Paper
2022 Procedure to Determine the Stability of H2O2/Water/ADN/AN System using multivariate Methods (PLSR, DOE, PCA)
Becker, Wolfgang; Weiser, Volker; Roth, Evelin; Sachsenheimer, Kerstin; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2022 Processing of Commingled Yarns in 3D Skeleton Winding (3DSW)
Beck, Björn; Shim, Y.-B.; Haas, Jonathan; Eyerer, Peter; Park, Y.-B.; Henning, Frank
Vortrag
Presentation
2022 Programmable materials based on thermoplastic polyurethane and polystyrene
Schwarz, Angela; Wenz, Franziska; Lichti, Tobias; Vogelmann, Patricia; Hübner, Christof
Poster
2022 Properties of Bromine Fused Salts Based on Quaternary Ammonium Molecules and their Relevance for Use in a Hydrogen Bromine Redox Flow Battery
Küttinger, Michael; Loichet Torres, Paulette A.; Meyer, Emeline; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2022 Prüfmethodik zur Validierung von Lebensdauerberechnungen für Kolben und Zylinderköpfe aus Aluminiumlegierungen unter überlagerter TMF/HCF-Belastung
Kuhlen, Karl Gerhard
Dissertation
Doctoral Thesis
2022 Quiet Please - "PolymerAkustik" Project: Holistic solutions for low-noise plastic components
Diemert, Jan; Hohe, Jörg; Rohlfing, Jens; Troge, Jan
Zeitschriftenaufsatz
Journal Article
2022 Reactive Extrusion Synthesis of Biobased Isocyanate-Free Hydrophobically Modified Ethoxylated Urethanes with Pendant Hydrophobic Groups
Wołosz, Dominik; Fage, Aleksandra; Parzuchowski, Paweł Grzegorz; Świderska, Aleksandra; Brüll, Robert
Zeitschriftenaufsatz
Journal Article
2022 Resource Management as Part of Sustainable Urban District Development
Koller, Michaela; Eckert, Karl; Ferber, Uwe; Gräbe, Gudrun; Verbücheln, Maic; Wendler, Katja
Zeitschriftenaufsatz
Journal Article
2022 Sensorik und Sicherheit
Pannek, Carolin; Lambrecht, Armin; Wöllenstein, Jürgen; Buse, Karsten; Keßler, Armin; Tschuncky, Ralf; Jäckel, Patrick; Quirin, Steven; Oeckl, Steven; Youssef, Sargon; Herrmann, Hans-Georg
Aufsatz in Buch
Book Article
2022 Sensors and safety
Pannek, Carolin; Lambrecht, Armin; Wöllenstein, Jürgen; Buse, Karsten; Keßler, Armin; Tschuncky, Ralf; Jäckel, Patrick; Quirin, Steven; Youssef, Sargon; Herrmann, Hans-Georg; Oeckl, Steven
Aufsatz in Buch
Book Article
2022 Setting behavior and mechanical properties of concrete rubble fly ash geopolymers
Kugler, F.; Karrer, J.; Krcmar, W.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2022 SHS-Synthesis of Nanostructured Boron Microparticles
Pietsch, Erik; Kelzenberg, Stefan; Knapp, Sebastian; Teipel, Ulrich
Konferenzbeitrag
Conference Paper
2022 Simulation of the Influence of Propellant Grain Geometry on Bulk Density
Lietz, Martin; Wurster, Sebastian
Konferenzbeitrag
Conference Paper
2022 Simulation of the Loading Density for Gun Propellants with Arbitrary Shapes Using a Discrete Element Method
Wurster, Sebastian; Lietz, Martin; Sprengel, David
Zeitschriftenaufsatz
Journal Article
2022 Skalierbare Herstellung von ATMPs
Gebken, Natalie; Horbelt, Jessica; Kleine-Wechelmann, Sarah; Ort, Thomas; Puls, Sebastian; Schandar, Markus; Traube, Andreas; Biermann, Ferdinand; Brandstätter, Tobias Claus; Gräfe, Stefan; Herbst, Laura; König, Niels; Schmitt, Robert; Ackermann, Heiner; Diessel, Erik; Lengen, Rolf Hendrik van; Schmidt, Andreas; Braun, Dennis; Hunger, Sandra; Werner, Michael; Boskovic, Dusan; Mendl, Alexander; Graumann, Tobias; Lachmann, Kristina; Mann, Annika; Brehmer, Annika; Dürre, Gregor; Hein, Christoph; Blache, Ulrich; Dluczek, Sarah; Dünkel, Anna; Franz, Paul; Fricke, Stephan; Tradler, Thomas
Paper
2022 Spray Drying of Energetic Materials by the Example of Ammonium Nitrate and Ammonium Dinitramide
Heintz, Thomas; Busch, Konstantin; Dresel, Alexander
Konferenzbeitrag
Conference Paper
2022 Structural Health Monitoring in Additive Manufactured Structures by Total Electrical Resistance Measurements
Liebig, Wilfried; Muth, Markus; Seitz, Michael; Wittemann, Florian; Weiss, Patrick
Konferenzbeitrag
Conference Paper
2022 Study of Different Active Pre-Chamber Ignition Layouts for Lean Operating Gas Engines using 3D-CFD Simulations
Vacca, Antonino; Chiodi, Marco; Kulzer, André Casal; Bargende, Michael; Bucherer, Sebastian; Breuer, Albert; Rothe, Paul Ewald; Kollmeier, Hans-Peter; Helmut, Ruhland; Kraljevic, Ivica
Konferenzbeitrag
Conference Paper
2022 Study of Influence of Aluminum Nitride Nanoparticles on the Structure, Phase Composition and Mechanical Properties of AZ91 Alloy
Khrustalyov, Anton; Zhukov, Ilya; Nikitin, Pavel; Kolarik, Vladislav; Klein, Friedrich; Akhmadieva, Anastasia; Vorozhtsov, Alexander
Zeitschriftenaufsatz
Journal Article
2022 Study of material homogeneity in the long fiber thermoset injection molding process by image texture analysis
Maertens, Robert; Schöttl, Ludwig; Liebig, W.; Elsner, Peter; Weidenmann, Kay A.
Zeitschriftenaufsatz
Journal Article
2022 Surface-enhanced Raman spectroscopy (SERS) for trace detection: measurement parameters
Müller, Stefan; Schweikert, Wenka; Mendl, Alexander; Schnürer, Frank
Konferenzbeitrag
Conference Paper
2022 Synthesis and Phase Behavior of a Platform of CO2-Soluble Functional Gradient Copolymers Bearing Metal-Complexing Units
Ruiu, A.; Bouilhac, C.; Gimello, O.; Seaudeau-Pirouley, K.; Senila, M.; Jänisch, Thorsten; Lacroix-Desmazes, P.
Zeitschriftenaufsatz
Journal Article
2022 Systematic Approach for Finite Element Analysis of Thermoplastic Impregnated 3D Filament Winding Structures - Advancements and Validation
Haas, Jonathan; Aberle, Daniel; Krüger, Anna; Beck, Björn; Eyerer, Peter; Kärger, L.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2022 The Direct Sandwich Composite Molding (D-SCM) Process: Sandwich Manufacturing and Characterization
Behnisch, Felix; Brütsch, Jonathan; Werner, Henrik O.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2022 Towards 3D Process Simulation for In Situ Hybridization of Fiber-Metal-Laminates (FML)
Poppe, Christian T.; Werner, Henrik O.; Kruse, Moritz; Chen, Hui; Khalifa, Noomane Ben; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2022 Untersuchung chemischer Recyclingpotentiale von Polyamid 6 Kunststoffabfällen mittels Glykolyse
Benzekri, Houssam
Master Thesis
2022 Untersuchung der Verbrennung von Siliciumpartikeln und deren Produkte
Schäfer, Tim
Master Thesis
2022 Untersuchung von Strömung und Wärmeübergang im Kontext von Vorkammerzündsystemen mithilfe numerischer Strömungsmechanik
Rensinghoff, Vincent
Master Thesis
2022 Untersuchungen zum Einfluss der Oberflächenstruktur und ausgewählten Haftflüssigkeiten auf die Nasshaftung
Kröner, Lea
Bachelor Thesis
2022 Up-Scaling Support Materials for PEM Electrolysis
Gurusaran, Kavi Nila
Master Thesis
2022 Vergleich verschiedener Lüftungsmethoden zur Vermeidung explosionsfähiger Atmosphären in einer kombinierten Windkraft- und Elektrolyseanlage
Schemberg, Tobias
Bachelor Thesis
2022 Vermeidung explosionsfähiger Atmosphären im zur Wasserstoffspeicherung genutzten Monopfahl einer kombinierten Windkraft- und Elektrolyseanlage
Frank, Lukas
Bachelor Thesis
2022 Vibration Optimization in High Power Electric Machines with Lightweight Plastic Stator Housing
Langheck, Andreas; Digel, Christian; Liebertseder, Johannes; Reuter, Steffen; Doppelbauer, Martin
Konferenzbeitrag
Conference Paper
2022 Virtual Development of a New 3-Cylinder Natural Gas Engine with Active Pre-chamber
Vacca, Antonino; Chiodi, Marco; Bargende, Michael; Kulzer, Andre Casal; Bucherer, Sebastian; Rothe, Paul Ewald; Kraljevic, Ivica; Kollmeier, Hans-Peter; Breuer, Albert; Ruhland, Helmut
Konferenzbeitrag
Conference Paper
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2021

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2021 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2021 A 3D process simulation model for wet compression moulding
Poppe, Christian T.; Krauß, Constantin; Albrecht, Fabian; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2021 A digital twin for lightweight thermoplastic composite part production
Meyer, Morten-Christian; Delforouzi, Ahmad; Schlimper, Ralf; John, Marianne; Link, Tobias; Koster, Dirk; Summa, Jannik; Krauß, Constantin
Konferenzbeitrag
Conference Paper
2021 A sequential approach for simulation of thermoforming and squeeze flow of glass mat thermoplastics
Dörr, D.; Ivanov, S.; Gergely, R.; Meyer, N.; Henning, F.; Straatman, A.G.; Hrymak, A.
Konferenzbeitrag
Conference Paper
2021 Beitrag zur Charakterisierung des Werkstoffverhaltens von aPA 6 für die Realisierung eines robusten T-RTM-Prozesses
Wendel, Rainer
Dissertation
Doctoral Thesis
2021 Bench Scale Fire Resistance Test of Materials for Housings of Rechargeable Energy Storage System (REESS)
Höhne, Carl-Christoph; Gettwert, Volker; Frank, Fabian; Griesbaum, Patrick; Kilian, Sascha; Menrath, Andreas
Poster
2021 Bestimmung der partikulären Eigenschaften von aufbereiteten Sekundärrohstoffen aus Wärmedämmverbundsystemen
Fehn, Thomas; Wolf, Sebastian; Schreiber, Alex; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2021 BioKompass 2021. Diskurse über Transformation anregen
Höfling, Christina; Hüsing, Bärbel; Kimpeler, Simone; Lux, Alexandra; Parrisius, Martina; Pohsner, Ute; Roßmanith, Eva; Schirrmeister, Elna; Theiler, Lena; Voglhuber-Slavinsky, Ariane
Bericht
Report
2021 Bridging product life cycle gaps in LCA & LCC towards a circular economy
Dieterle, Michael; Viere, Tobias
Zeitschriftenaufsatz
Journal Article
2021 Characterization of the Detonation Pressure of a PETN Based PBX with the Optical Active Method
Quaresma, Joana; Deimling, Lukas; Campos, Jose; Mendes, Ricardo
Zeitschriftenaufsatz
Journal Article
2021 Charakterisierung und Modifizierung der elektromagnetischen Schirmeigenschaften von Sheet Molding Compound
Blaess, Philipp
Master Thesis
2021 Charakterisierung und Störstoffanalyse von rückgewonnenen Stoffströmen aus Wärmedämmverbundsystemen
Fehn, Thomas; Kugler, Felix; Tübke, Beatrice; Schweppe, Rainer; Mebert, Phillip; Krcmar, Wolfgang; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2021 Chemical Recycling of Post-Consumer PLA Waste for Sustainable Production of Ethyl Lactate
Majgaonkar, Pranav; Hanich, Ronny; Malz, Frank; Brüll, Robert
Zeitschriftenaufsatz
Journal Article
2021 Circularity of consumer electronics within Life Cycle (GAP) Analysis
Dieterle, Michael; Lätsch, Corinna; Brantsch, Peter; Nioac de Salles, A.C.
Vortrag
Presentation
2021 Composite anion exchange membranes fabricated by coating and UV crosslinking of low-cost precursors tested in a redox flow battery
Charyton, Martyna; Deboli, Francesco; Fischer, Peter; Henrion, Gérard; Etienne, Mathieu; Donten, Mateusz L.
Zeitschriftenaufsatz
Journal Article
2021 Composite anion-exchange membrane fabricated by UV cross-linking vinyl imidazolium poly(Phenylene oxide) with polyacrylamides and their testing for use in redox flow batteries
Charyton, Martyna; Iojoiu, Cristina; Fischer, Peter; Henrion, Gérard; Etienne, Mathieu; Donten, Mateusz Lech
Zeitschriftenaufsatz
Journal Article
2021 Composites aus reaktiv verarbeitetem Polyamid 6 auf dem Weg zur Serienreife
Wilhelm, Michael Leander
Zeitschriftenaufsatz
Journal Article
2021 Compounding of Short Fiber Reinforced Phenolic Resin by Using Specific Mechanical Energy Input as a Process Control Parameter
Maertens, Robert; Liebig, W.; Elsner, Peter; Weidenmann, Kay A.
Zeitschriftenaufsatz
Journal Article
2021 Continuous ultrasonic welding of thermoplastic composites. LCI Modelling for the Eco-Statement
Jongbloed, Bram; Fernandez Villegas, Irene; Salles, Ana; Lätsch, Corinna; Gess, Andreas; Reichert, Thomas; Pfeuffer, Simon
Poster
2021 Crossing the Valley of Death. From Fundamental to Applied Research in Electrolysis
Siegmund, Daniel; Metz, Sebastian; Peinecke, Volker; Warner, Terence E.; Cremers, Carsten; Grevé, Anna; Smolinka, Tom; Segets, Doris; Apfel, Ulf-Peter
Zeitschriftenaufsatz
Journal Article
2021 Cycle behaviour of hydrogen bromine redox flow battery cells with bromine complexing agents
Küttinger, M.; Brunetaud, R.; Wlodarczyk, J.K.; Fischer, Peter; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2021 Decomposition Pathways of Ammonium Dinitramide (ADN) and its HNO3-Clusters Elucidated by DFT-Calculations
Lang, Johannes; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2021 Demontage von Komposit-Bauteilen - Potenzial energetischer Materialien zur Demontage von Rotorblättern
Seiler, Elisa; Keßler, Armin; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2021 Design and Evaluation of a Houseless High-Performance Machine with Thermoset Molded Internal Cooling
Reuter, Steffen; Sorg, Thomas; Liebertseder, Johannes; Doppelbauer, M.
Vortrag
Presentation
2021 Designing Shape Morphing Behavior through Local Programming of Mechanical Metamaterials
Wenz, Franziska; Schmidt, Ingo; Leichner, Alexander; Lichti, Tobias; Baumann, Sascha; Andrae, Heiko; Eberl, Christoph
Zeitschriftenaufsatz
Journal Article
2021 Development of a method for isobaric large temperature jump adsorption experiments
Teicht, Christian
Zeitschriftenaufsatz
Journal Article
2021 Development of a Reactive Polyurethane Foam System for the Direct Sandwich Composite Molding (D-SCM) Process
Behnisch, Felix; Lichtner, V.; Henning, Frank; Rosenberg, Philipp
Zeitschriftenaufsatz
Journal Article
2021 Development of an Efficient Crystallisation Scale Up of Incongruently Soluble Cocrystal Coformers to Produce High-Quality Crystals Using the Example of the CL-20/HMX Cocrystal
Herrmannsdörfer, Dirk
Dissertation
Doctoral Thesis
2021 Development of Zinc Slurry Air Flow Battery
Choi, Nak Heon
Dissertation
Doctoral Thesis
2021 eco Design in Next Generation Aircraft Fuselage
Solares-Canal, Marta; Herrmann, Ralf; Wölcken, Piet-Christof; Moll, Torsten; Höhne, Carl-Christoph; Lätsch, Corinna
Vortrag
Presentation
2021 Effects of four isocyanates and four plasticizers on the thermomechanical and tensile properties of hydroxyl-terminated polybutadiene elastomers and the effect of solid particle filling
Seyidoglu, Tijen; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2021 Electrochemical lithiation/delithiation of ZnO in 3D-structured electrodes: Elucidating the mechanism and the solid electrolyte interphase formation
Kreissl, Julian Jakob Alexander; Petit, Tim Jan; Oppermann, Raika; Cop, Pascal; Gerber, Tobias; Joos, Martin; Abert, Michael; Tübke, Jens; Miyazaki, Kohei; Abe, Takeshi; Schröder, Daniel
Zeitschriftenaufsatz
Journal Article
2021 Electrochemical synthesis of biobased polymers and polymer building blocks from vanillin
Kunkel, Robin; Schmidt, Volkmar M.; Cremers, Carsten; Müller, Dominik; Schmiedl, Detlef; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2021 Electrochemical vanillin reduction in a plane parallel flow reactor: Characterization, modeling and process improvement
Kunkel, Robin; Kovács, Miklós M.; Müller, Dominik; Schmidt, Volkmar M.; Simmat, Fabian; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2021 Elektrochemische Sauerstoffpumpe - Entwicklung und Charakterisierung einer elektrochemischen Zelle zur Sauerstoffanreicherung aus Umgebungsluft
Röttgen, Niklas
Master Thesis
2021 Entwicklung einer koaxialen Propeller-Antriebseinheit für Luftfahrtanwendungen
Jerg, Simon
Bachelor Thesis
2021 Entwicklung eines Energiespeicherkonzeptes auf der Basis von wässrigen Vanadium(II)-sulfat-Lösungen
Noack, Jens
Dissertation
Doctoral Thesis
2021 Entwicklung eines Simulationsmodells zur Berechnung von Prozessgrößen im Pultrusionsverfahren mit reaktiven thermoplastischen Matrices
Sanampudi, Chaitanya Reddy
Master Thesis
2021 Entwicklung von Rekombinationsschichten zur Minimierung des Gas-Crossovers in Elektrolysezellen
Koß, Sara
Master Thesis
2021 Environmental Improvement Potential of Flexible Polyurethane Foam for Aviation Applications. A Case Example Analysis
Höhne, Carl-Christoph; Hanich, Ronny; Salles, Ana; Brantsch, Peter; Reichert, Thomas
Poster
2021 Experimental and numerical analysis of mold filling in rotational molding
Nieschlag, Jonas; Seuffert, Julian; Strack, Daniel; Friedmann, Marco; Kärger, Luise; Henning, Frank; Fleischer, Jürgen
Zeitschriftenaufsatz
Journal Article
2021 Exploring the thermodynamics of the bromine electrode in concentrated solutions for improved parametrisation of hydrogen-bromine flow battery models
Wlodarczyk, Jakub K.; Küttinger, Michael; Friedrich, Andreas K.; Schumacher, Jürgen O.
Zeitschriftenaufsatz
Journal Article
2021 Fertigung und Bewertung auxetischer Metamaterialien im Hinblick auf Programmierbare Materialien
Scheuring, Benedikt
Master Thesis
2021 Fiber bundle tracking method to analyze sheet molding compound microstructure based on computed tomography images
Schöttl, L.; Weidenmann, K.A.; Sabiston, T.; Inal, K.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2021 Fiber shortening during injection molding of glass fiber-reinforced phenolic molding compounds
Maertens, Robert; Hees, Annalena; Schöttl, Ludwig; Liebig, Wilfried; Elsner, Peter; Weidenmann, Kay André
Zeitschriftenaufsatz
Journal Article
2021 Final results of NATO SET-237 "Printed standards for stand-off detection" and future developments
Schnürer, Frank; Ulrich, Christian; Chirico, Roberto; Moon, Raphael; Guichteau, Jason; Hung, Kevin
Konferenzbeitrag
Conference Paper
2021 Final results of NATO SET-237 "Printed Standards for Stand-off Detection"" and future developments
Schnürer, Frank; Ulrich, Christian; Chirico, Roberto; Moon, Raphael; Guichteau, Jason; Hung, Kevin
Vortrag
Presentation
2021 Final results of NATO SET-237 "Printed Standards for Stand-off Detection"" and future developments
Schnürer, Frank; Ulrich, Christian; Chirico, Roberto; Moon, Raphael; Guichteau, Jason; Hung, Kevin
Poster
2021 Flame Retardancy of Thermoplastic Foams from Biopolymers
Schmidt, Robert; Höhne, Carl-Christoph; Berner, Valeria; Hallstein, Jannik; Metzsch-Zilligen, Elke; Pfaendner, Rudolf; Mack, Christoph
Poster
2021 Flammresistenz von PLA-Partikelschaum
Höhne, Carl-Christoph; Schmidt, Robert
Vortrag
Presentation
2021 Fused filament fabrication: Comparison of methods for determining the interfacial strength of single welded tracks
Heuer, Anselm; Huether, Jonas; Liebig, W.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2021 Füge- und Dichtkonzept für einen Leichtbauverbrennungsmotor
Zabirov, Alexander; Schleser, Markus; Bucherer, Sebastian
Zeitschriftenaufsatz
Journal Article
2021 Herstellung und Charakterisierung von aramidfaserverstärktem Sheet Molding Compound
Schäfer, Mike
Master Thesis
2021 High energy density electrolytes for H2/Br2 redox flow batteries, their polybromide composition and influence on battery cycling limits
Küttinger, Michael; Wlodarczyk, Jakub K.; Daubner, Daniela; Fischer, Peter; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2021 High-Precision Density Measurements of Energetic Materials for Quality Assessment
Herrmannsdörfer, Dirk; Klapötke, Thomas M.
Zeitschriftenaufsatz
Journal Article
2021 Hydrogen-Bromine Redox-Flow Battery Cycling with Bromine Complexing Agent: on the Benefits of Nanoporous Separator Versus Proton Exchange Membrane
Saadi, K.; Kuettinger, M.; Fischer, Peter; Zitoun, D.
Zeitschriftenaufsatz
Journal Article
2021 Impact of nanocomposite combustion aerosols on A549 cells and a 3D airway model
Hufnagel, Matthias; May, Nadine; Wall, Johanna; Wingert, Nadja; Garcia-Käufer, Manuel; Arif, Ali Talib; Hübner, Christof; Berger, Markus; Mülhopt, Sonja; Baumann, Werner; Weis, Frederik; Krebs, Tobias; Becker, Wolfgang; Gminski, Richard; Stapf, Dieter; Hartwig, Andrea
Zeitschriftenaufsatz
Journal Article
2021 Improved continuous synthesis of UiO-66 enabling outstanding production rates
Polyzoidis, Angelos; Reichle, Steffen; Schwarzer, Maud; Piscopo, Calogero; Löbbecke, Stefan; Boskovic, Dusan
Zeitschriftenaufsatz
Journal Article
2021 In Situ Measurement of Localized Current Distribution in H2-Br2 Redox Flow Batteries
Martinez Cantu, Brenda Berenice; Fischer, Peter; Zitoun, David; Tübke, Jens; Pinkwart, Karsten
Zeitschriftenaufsatz
Journal Article
2021 In-operando Raman study of lithium plating on graphite electrodes of lithium ion batteries
Cabañero, M.A.; Hagen, Markus; Quiroga-González, E.
Zeitschriftenaufsatz
Journal Article
2021 Influence of lightweight plastics on the NVH behavior of high-performance electric machines
Reuter, Steffen; Liebertseder, Johannes; Langheck, Andreas; Doppelbauer, Martin
Konferenzbeitrag
Conference Paper
2021 Influence of the Moisture Content of Thermoplastics on their Vibroacoustic Behavior
Georgi, Tom; Troge, Jan; Diemert, Jan
Zeitschriftenaufsatz
Journal Article
2021 Inlinetauglichkeit von zerstörungsfreien Prüfmethoden für den digitalen Zwilling von thermoplastischen Carbonfaser-Tapes
Koster, Dirk; Summa, Jannik; Jungmann, Christian; Rabe, Ute; Herrmann, Hans-Georg; Link, Tobias; John, Marianne; Nagel, Frank; Schlimper, Ralf; Delforouzi, Ahmad; Roggenbuck, Josef; Wolf, Klaus
Konferenzbeitrag
Conference Paper
2021 Innovative development of programmable phase change materials and their exemplary application
Lengsfeld, Kristin; Walter, Moritz; Krus, Martin; Pappert, Sandra; Teicht, Christian
Zeitschriftenaufsatz
Journal Article
2021 Intrinsic flame retardancy of poly(lactic acid) bead foams
Höhne, Carl-Christoph; Schmidt, Robert; Berner, Valeria; Metzsch-Zilligen, Elke; Westphal, Erik; Pfaendner, Rudolf; Mack, Christoph
Zeitschriftenaufsatz
Journal Article
2021 Kontinuierliches Verfahren zum Erhitzen von Medien mittels Mikrowellenstrahlung und dafür geeignete Mikrowellenanlage
Scholz, Hans Jürgen; Emmerich, Rudolf; Schönwald, Markus
Patent
2021 Kunststoffverpackungen im geschlossenen Kreislauf
Elsner, Peter; Müller-Kirschbaum, T.; Schweitzer, K.; Wolf, R.; Seiler, Elisa; Désilets, P.; Detsch, R.; Dornack, C.; Ferber, J.; Fleck, C.; Fröhling, M.; Hagspiel, K.; Hahn, R.; Haupts, C.; Hoffmann, C.; Krüger, P.; Lange, M.; Leopold, T.; Löscher, M.; Niedersüß, P.; Ohlendorf, T.; Pattberg, J.; Renner, M.; Schlarb, A.K.; Schmidt, M.; Siebert, H.; Siggelkow, B.A.; Stadelmann, S.; Thielen, J.; Wilts, H.; Beermann, M.; Dieterle, Michael; Ecke, N.; Klose, S.; Kobus, J.; Krause, L.; Maletz, R.; Marm, A.; Kadner, S.
Bericht
Report
2021 Life Cycle Assessment for collaborative robot-assisted composite parts manufacturing using a work effort unit approach
Nioac de Salles, A.C.
Vortrag
Presentation
2021 LPG and Prechamber as Enabler for Highly Performant and Efficient Combustion Processes Under Stoichiometric Conditions
Schmid, Hans Felix; Kollmeier, Hans-Peter; Kraljevic, Ivica; Gottwald, Theo; Sobek, Florian; Bargende, Michael; Chiodi, Marco; Kaechele, Andreas; Cupo, Francesco
Bericht
Report
2021 Makroskopische Reibwertsteuerung mit elektrischen Potenzialen unter Verwendung ionischer Flüssigkeitsgemische
Gatti, F.; Amann, T.; Kailer, A.; Rabenecker, P.; Baltes, N.; Marx, B.; Rühe, J.
Konferenzbeitrag
Conference Paper
2021 Manipulation of carbon nanoparticles in composites for improved electrical properties
Vilão Cruz Gião Morais, Manuel Maria
Dissertation
Doctoral Thesis
2021 Manufacturing and Flame Retardancy Modification of Mono-Matrix Sandwich Components
Kilian, Sascha; Höhne, Carl-Christoph; Menrath, Andreas; Tillner, Benjamin
Poster
2021 Material modelling of fabric deformation in forming simulation of fiber-metal laminates - A review on modelling fabric coupling mechanisms
Werner, Henrik Oliver; Schäfer, Florian; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2021 Melt Crystallization of Ammonium Dinitramide (ADN) Investigated by Means of X-ray Diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Heintz, Thomas
Zeitschriftenaufsatz
Journal Article
2021 Messung der Abzugskräfte im Pultrusionsprozess in Abhängigkeit von Werkzeugbeschichtung und Harzsystem
Wieber, Benedikt
Bachelor Thesis
2021 Metal-organic framework/graphene oxide composites for CO2 capture by microwave swing adsorption
Muschi, Mégane; Devautour-Vinot, Sabine; Aureau, Damien; Heymans, Nicolas; Sene, Saad; Emmerich, Rudolf; Ploumistos, Alexandros; Geneste, Amine; Steunou, Nathalie; Patriarche, Gilles; Weireld, Guy de; Serre, Christian
Zeitschriftenaufsatz
Journal Article
2021 Microwave additive manufacturing of continuous carbon fibers reinforced thermoplastic composites: Characterization, analysis, and properties
Li, Nanya; Link, Guido; Jelonnek, John; Morais, Manuel V.C.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2021 Moisture Adsorption and Desorption Behavior of Raw Materials for the T-RTM Process
Herzog, Janek; Wendel, Rainer; Weidler, Peter, G.; Wilhelm, Michael; Rosenberg, Philipp; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2021 N-phosphorylated Iminophosphoranes based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and their flame-retardant behavior in epoxy resins
Weinert, Michael; Döring, Manfred
Zeitschriftenaufsatz
Journal Article
2021 Near-component testing of materials for cylinder heads to determine thermomechanical fatigue under superimposed high-frequency mechanical loads
Kuhlen, Karl Gerhard; Rothe, Paul Ewald; Seifert, Thomas
Zeitschriftenaufsatz
Journal Article
2021 New Concept of Electronically and Protonic Conductive Polymer Structures for the Proton Exchange Membrane Water Electrolysis Produced by Additive Manufacturing
Maletzko, Annabelle; Brösgen, Linda; Tchoffo Kaffo, Christian; Gomez Villa, Eduardo Daniel; Melke, Julia; Weiss, Patrick; Hübner, Christof; Höhne, Carl-Christoph
Poster
2021 Novel electrolyte rebalancing method for vanadium redox flow batteries
Poli, Nicola; Schäffer, Michael; Trovò, Andrea; Noack, Jens; Guarnieri, Massimo; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2021 Oberleitungs-LKW als ein Baustein für ein nachhaltiges Verkehrssystem: Das Projekt eWayBW in Baden-Württemberg
Zembrot, Marcel; Böttiger, Harald; Schollbach, Frank; Flotho, Rainer; Wietschel, Martin; Burghard, Uta; Scherrer, Aline; Gnann, Till; Speth, Daniel; Plötz, Patrick; Fritz, John; Doll, Claus; Brauer, Clemens; Waßmuth, Volker; Köllermeier, Nadine; Schüller, Hagen; Lauer, Martin; Burgert, Tobias; Berg, Lars Fredrik
Bericht
Report
2021 On the functionalization and characterization of hydroxyl-terminated polybutadiene with octyl-1-azide and the evaluation of polyurethane elastomers based on such modified HTPB
Lemos, Mauricio Ferrapontoff; Mendes, Luis Claudio; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2021 Organosolv Lignin for Non-Isocyanate Based Polyurethanes (NIPU) as Wood Adhesive
Sarazin, Jasa; Pizzi, Antonio; Amirou, Siham; Schmiedl, Detlef; Sernek, Milan
Zeitschriftenaufsatz
Journal Article
2021 Partikeltechnologie
Teipel, Ulrich
Editorial
2021 Performance evaluation of a high-performance motor with thermoset molded internal cooling
Reuter, Steffen; Berg, Lars Fredrik; Doppelbauer, Martin
Vortrag
Presentation
2021 Plastic Extrusion Process Optimization by Digital Twins
Sarishvili, Alex; Just, Daniel; Moser, Kevin; Wirsen, Andreas; Diemert, Jan; Jirstrand, Mats
Zeitschriftenaufsatz
Journal Article
2021 Plastics Packaging in a Closed Loop. Potentials, Conditions, Challenges
Elsner, Peter; Müller-Kirschbaum, T.; Schweitzer, K.; Wolf, R.; Seiler, Elisa; Désilets, P.; Detsch, R.; Dornack, C.; Ferber, J.; Fleck, C.; Fröhling, M.; Hagspiel, K.; Hahn, R.; Haupts, C.; Hoffmann, C.; Krüger, P.; Lange, M.; Leopold, T.; Löscher, M.; Niedersüß, P.; Ohlendorf, T.; Pattberg, J.; Renner, M.; Schlarb, A.K.; Schmidt, M.; Siebert, H.; Siggelkow, B.A.; Stadelmann, S.; Thielen, J.; Wilts, H.; Beermann, M.; Dieterle, Michael; Ecke, N.; Klose, S.; Kobus, J.; Krause, L.; Maletz, R.; Marm, A.; Kadner, S.
Bericht
Report
2021 Polyurethane Seating Structure. A case study for holistic product development
Höhne, Carl-Christoph; Emmerich, Rudolf; Reichert, Thomas
Zeitschriftenaufsatz
Journal Article
2021 Pristine and Modified Porous Membranes for Zinc Slurry-Air Flow Battery
Tsehaye, Misgina Tilahun; Gebreslassie, Getachew Teklay; Choi, Nak Heon; Milian, Diego; Martin, Vincent; Fischer, Peter; Tübke, Jens; Kissi, Nadia El; Donten, Mateusz L.; Alloin, Fannie; Iojoiu, Cristina
Zeitschriftenaufsatz
Journal Article
2021 Process Development for the Fabrication of Membrane Electrode Assemblies for Polymer Electrolyte Membrane Water Electrolyzer
Patel, Samarth Binal
Master Thesis
2021 Quality Assessment of the CL-20/HMX Cocrystal Utilising Digital Image Processing
Herrmannsdörfer, Dirk; Klapötke, Thomas M.
Zeitschriftenaufsatz
Journal Article
2021 Radikaler Flammschutz - Vom Moleküldesign bis zur Anwendung
Posern, Christian; Höhne, Carl-Christoph
Zeitschriftenaufsatz
Journal Article
2021 Requirements for the Chemical Recycling of Fibre Reinforced Polymers
Seiler, Elisa; Pico, Davide; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2021 Rezeption von Forschungswebseiten
Rollbühler, Iris
Master Thesis
2021 Schalenförmige Hybridverbunde und Inserts
Henning, Frank; Bernath, Alexander; Bretz, Lucas; Denkena, B.; Fleischer, J.; Groß, L.; Günther, F.; Häfner, B.; Herrmann, Hans-Georg; Herwig, A.; Horst, P.; Jost, H.; Kretzschmar, V.; Lanza, G.; Meiners, D.; Muth, M.; Pohl, M.; Roth, S.; Schmidt, C.; Schwarz, M.; Gonzalez, J.S.; Seuffert, J.; Stommel, M.; Summa, J.; Weidenmann, K.; Weykenat, J.
Aufsatz in Buch
Book Article
2021 Selected Fatty Acids Esters as Potential PHB-V Bioplasticizers: Effect on Mechanical Properties of the Polymer
Nosal, Hanna; Moser, Kevin; Warzala, Marek; Holzer, Andrei; Stanczyk, Dorota; Sabura, Ewa
Zeitschriftenaufsatz
Journal Article
2021 Semibatch Reaction Crystallization for Scaled-Up Production of High-Quality CL-20/HMX Cocrystal: Efficient Because of Solid Dosing
Herrmannsdörfer, Dirk; Klapötke, Thomas M.
Zeitschriftenaufsatz
Journal Article
2021 Simulation of Heat Flow Curves of NC-Based Propellants - Part 2: Application to DPA Stabilized Propellants
Itkis, Daniel G.; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2021 Simulation of Heat Flow Curves of NC-Based Propellants - Part 1: Determination of Reaction Enthalpies and Other Characteristics of the Reactions of NC and Stabilizer DPA Using Quantum Mechanical Methods
Itkis, D.G.; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2021 Simulation und Optimierung eines gasgespülten Vorkammerzündsystems für Homogen-Mager-Brennverfahren in Gasmotoren unter Verwendung von 1D- und 3D-Simulationen
Schnetgöke, Fabian
Master Thesis
2021 Solubility behaviour of CL-20 and HMX in organic solvents and solvates of CL-20
Herrmannsdörfer, Dirk; Stierstorfer, Jörg; Klapötke, Thomas M.
Zeitschriftenaufsatz
Journal Article
2021 Solution of Electromagnetic Problem for an Application in Advanced Pultrusion Processes
Akishin, Pavel Y.; Barkanov, Evgeny N.; Graf, Matthias; Emmerich, Rudolf
Konferenzbeitrag
Conference Paper
2021 Study of a polymer ejector design and manufacturing approach for a mobile air conditioning
Beran, T.; Hübel, J.; Maertens, Robert; Reuter, Steffen; Gärtner, J.; Köhler, J.; Koch, T.
Zeitschriftenaufsatz
Journal Article
2021 Supercritical CO2 Extraction of Palladium Oxide from an Aluminosilicate-Supported Catalyst Enhanced by a Combination of Complexing Polymers and Piperidine
Ruiu, A.; Bauer-Siebenlist, B.; Senila, M.; Li, W.S.J.; Seaudeau-Pirouley, K.; Lacroix-Desmazes, P.; Jänisch, T.
Zeitschriftenaufsatz
Journal Article
2021 Sustainable Light-Weight Solutions. Based on PLA and Basalt
Tillner, Benjamin; Moser, Kevin; Hanstein, Stefan
Zeitschriftenaufsatz
Journal Article
2021 Synthese und Optimierung von Trägermaterialien für die PEM-Elektrolyse
Lorenz, Henning
Master Thesis
2021 Systematic approach for finite element analysis of thermoplastic impregnated 3D filament winding structures - General concept and first validation results
Haas, Jonathan; Hassan, Oktay Nedim; Beck, Björn; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2021 Systematic Study of Quaternary Ammonium Cations for Bromine Sequestering Application in High Energy Density Electrolytes for Hydrogen Bromine Redox Flow Batteries
Küttinger, M.; Loichet Torres, P.A.; Meyer, E.; Fischer, Peter; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2021 Tanks-in-series model for high-temperature electrochemical hydrogen pump
Danilov, Valery A.; Kolb, Gunther; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2021 The Influence of Some Electrolyte Additives on the Electrochemical Performance of Fe/Fe2+ Redox Reactions for Iron/Iron Redox Flow Batteries
Noack, Jens; Berkers, Max; Ortner, Jens; Pinkwart, Karsten
Zeitschriftenaufsatz
Journal Article
2021 The use of the empirical crack orientation tensor to characterize the damage anisotropy
Schöttl, L.; Liebig, Wilfried; Weidenmann, Kay André; Inal, K.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2021 Theoretical approximation of hydrodynamic and fiber-fiber interaction forces for macroscopic simulations of polymer flow process with fiber orientation tensors
Wittemann, Florian; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2021 Thermal Behavior and Micro Structure of TKX-50
Herrmann, Michael; Förter-Barth, Ulrich
Zeitschriftenaufsatz
Journal Article
2021 Thermal Switch Based on an Adsorption Material in a Heat Pipe
Winkler, Markus; Teicht, Christian; Corhan, Patrick; Polyzoidis, Angelos; Bartholome, Kilian; Schäfer-Welsen, Olaf; Pappert, Sandra
Zeitschriftenaufsatz
Journal Article
2021 Thermodynamische EFizienzanalyse eines kommerziellen NT- und HT-PEM Brennstoffzellenstacks und Vergleich der Verdünnungseffekte im Anodengas
Kraft, Samuel
Bachelor Thesis
2021 Towards numerical prediction of flow-induced fiber displacements during wet compression molding (WCM)
Poppe, C.; Albrecht, F.; Krauß, C.; Kärger, L.
Konferenzbeitrag
Conference Paper
2021 Untersuchung des optimalen Batteriezellen-Designs für eine möglichst effiziente Zellkühlung
Sollik, Lars
Master Thesis
2021 Untersuchung eines lösungsmittelbasierten Recyclingprozesses zur Wiederverwertung von Polymeren, Antimontrioxid und bromierten Flammschutzmitteln aus Elektronik-Altgeräten
Moselewski, Deborah
Master Thesis
2021 Uptake and absorption of fluoranthene from spiked microplastics into the digestive gland tissues of blue mussels, Mytilus edulis L.
Stollberg, Nicole; Kröger, Silja Denise; Reininghaus, Mathias; Forberger, Jens; Witt, Gesine; Brenner, Matthias
Zeitschriftenaufsatz
Journal Article
2021 Valorisation of polylactic acid (PLA) waste: A comparative life cycle assessment of various solvent-based chemical recycling technologies
Aryan, V.; Maga, D.; Majgaonkar, P.; Hanich, R.
Zeitschriftenaufsatz
Journal Article
2021 Vegetable Oils as Sustainable Inks for Additive Manufacturing: A Comparative Study
Vazquez-Martel,Clara; Becker, Lukas; Liebig, W.; Elsner, Peter; Blasco, Eva
Zeitschriftenaufsatz
Journal Article
2021 Versuchstechnische Untersuchung der Temperaturverteilung in einem Aluminiumkolben auf einem Prüfstand zur Bestimmung des Schädigungsverhaltens unter TMF-HCF Belastung
Fang, Qiwei
Bachelor Thesis
2021 Wickelwerkzeug zur Herstellung von endlosfaserverstärkten Polymer-Formteilen und Verfahren zu deren Herstellung mittels eines solchen Wickelwerkzeugs
Bachler, Kevin; Eyerer, Peter; Beck, Björn; Haas, Jonathan; Henning, Frank; Elsner, Peter; Urban, Helfried
Patent
2021 Zerstörungsfreie Prüfmethoden zur Merkmalsextraktion für den digitalen Zwilling der Thermoplast-Composite Wertschöpfungskette
Summa, Jannik; Rabe, Ute; Pudovikov, Sergey; Jungmann, Christian; Koster, Dirk; Herrmann, Hans-Georg; Link, Tobias; John, Marianne; Nagel, Frank; Schlimper, Ralf; Delforouzi, Ahmad; Roggenbuck, Josef; Wolf, Klaus
Konferenzbeitrag
Conference Paper
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2020

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2020 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2020 A 3D modelling approach for fluid progression during process simulation of wet compression moulding - motivation & approach
Poppe, Christian; Albrecht, Fabian; Krauß, Constantin; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2020 A novel approach for segmenting and mapping of local fiber orientation of continuous fiber-reinforced composite laminates based on volumetric images
Schöttl, L.; Dörr, D.; Pinter, P.; Weidenmann, K.A.; Elsner, Peter; Kärger, L.
Zeitschriftenaufsatz
Journal Article
2020 A novel model predictive control scheme based observer for working conditions and reconditioning monitoring of Zinc-Nickel single flow batteries
Li, Shawn; Li, Kang; Xiao, Evan; Xiong, Rui; Zhang, Jianhua; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2020 Abschlussbericht zu "MaterialDigital"
Schweizer, C.; Reichenbach, R.; Butz, A.; Lienhard, J.; Herrmann, T.; Preußner, J.; Hartrott, P. von; Friedmann, V.; Wessel, A.; Thomas, A.; Augenstein, E.; Oesterlin, H.; Tlatlik, J.; Bader, Bernd.; Graf, Matthias.; Baumann, Sascha; Grau, G.; Schindler, S.; Dauner, M.; Bulling, F.; Tiberto, D.; Klotz, U.; Basler, C.; Bertz, A.; Blug, A.; Becker, A.; Goranov, A.; Burkhardt, C.; Hartman, H.; Körte, F.
Bericht
Report
2020 Active and Passive Optical Fiber Metrology for Detonation Velocity Measurements
Quaresma, Joana; Deimling, Lukas; Campos, Jose; Mendes, Ricardo
Zeitschriftenaufsatz
Journal Article
2020 An Electrolyte Rebalancing Procedure for Vanadium Redox Flow Batteries
Poli, Nicola; Schäffer, Michael; Trovo, Andrea; Noack, Jens; Guarnieri, Massimo; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2020 Anionic Polymerization of e-Caprolactam under the Influence of Water: 2. Kinetic Model
Wendel, Rainer; Rosenberg, Philipp; Wilhelm, Michael; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2020 Aspects of electron transfer processes in vanadium redox-flow batteries
Roznyatovskaya, Nataliya; Noack, Jens; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2020 Automated 3D Skeleton Winding Process for Continuous-Fiber-Reinforcements in Structural Thermoplastic Components
Beck, Björn; Tawfik, H.; Haas, J.; Park, Y.-B.; Henning, Frank
Konferenzbeitrag
Conference Paper
2020 Beitrag zur Entwicklung eines einstufigen Herstellungsverfahrens von Polyurethan-Sandwichbauteilen mit CFK-Decklagen
Lichtner, Viktoria
Master Thesis
2020 Beitrag zur Kristallisationsoptimierung von Poly(L-Lactid) (PLLA) und Grundlagen zur Validierung einer Methode zur Inline-Charakterisierung des Kristallisationsverlaufs im Spritzgießprozess
Moser, Kevin
Dissertation
Doctoral Thesis
2020 Bio-based adhesive mixtures of pine tannin and different types of lignins
Sarazin, Jasa; Schmiedl, Detlef; Pizzi, Antonio; Sernek, Milan
Zeitschriftenaufsatz
Journal Article
2020 Characterization of influencing parameters in the robot-based filament winding process on a skeleton structure with thermoset pre-impregnated carbon fiber tows
Duan, Jinmin
Master Thesis
2020 Compensation of Water Influence on Anionic Polymerization of e-Caprolactam: 1. Chemistry and Experiments
Wilhelm, Michael; Wendel, Rainer; Aust, Martin; Rosenberg, Philipp; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2020 Construction and initial operation of a plant for the determination of the ultimate aerobic biodegradability according to DIN EN ISO 14855-2:2018
Pickhardt, Sebastian
Master Thesis
2020 Corona-Mechanistik, Kinetik, Modellierung, Simulation und Vorhersage des Verlaufs in Deutschland
Schmid, Helmut
Vortrag
Presentation
2020 Crack characterization of discontinuous fiber-reinforced composites by using micro-computed tomography: Cyclic in-situ testing, crack segmentation and crack volume fraction
Schöttl, L.; Kolb, P.; Liebig, Wilfried; Weidenmann, Kay André; Inal, K.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2020 Decomposition of ammonium dinitramide (ADN) elucidated by quantum chemical computations
Lang, Johannes; Bohn, Manfred
Konferenzbeitrag
Conference Paper
2020 Design for Recycling mit Formgedächtnispolymeren
Pretsch, Thorsten; Chalissery, Dilip; Schönfeld, Dennis; Walter, Mario; Wafzig, Florian
Vortrag
Presentation
2020 Designverifikation eines innovativen Elektromotors mit innenliegender Kühlung und integralem Kunststoffgehäuse mit Hilfe eines Funktionsprototypen
Stemmler, Christian
Master Thesis
2020 Development of flow fields for zinc slurry air flow batteries
Choi, N.H; Olmo, D. del; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2020 Dispatch-Algorithmen für künstliche Microgrids mit hohem Anteil an erneuerbaren Energien
Hübinger, Maximilian
Master Thesis
2020 Domänenübergreifende Workflows zur effizienten Entwicklung Programmierbarer Materialien
Weisheit, Linda; Wenz, Franziska; Lichti, Tobias; Eckert, Medardus; Baumann, Sascha; Hübner, Christof; Eberl, Christoph; Andrä, Heiko
Zeitschriftenaufsatz
Journal Article
2020 Eco-efficiency in a circular economy from a products life cycle gap perspective
Dieterle, Michael; Viere, Tobias
Vortrag
Presentation
2020 Elastomer Devulkanisation mittels Ultraschall-Intensivierter Extrusion. Schlussbericht Teil I & II
Just, Daniel; Moser, Kevin
Bericht
Report
2020 Electrochemical Polyvanillin Production: A valorization route from lignin to biobased polymers
Kunkel, Robin; Schmidt, Volkmar M.; Cremers, Carsten; Müller, Dominik; Schmiedl, Detlef; Tübke, Jens
Poster
2020 End of Life Innovation. Polyurethane Chemical Recycling (Solvolysis) Eco-statement - Preliminary results
Brantsch, Peter; Höhne, Carl-Christoph; Hanich, Ronny
Poster
2020 Endotherme Barrieren zum sicheren Betrieb von Lithium-Ionen-Batterien
Weinert, Michael; Miller, Martin; Frohberg, Jens; Fanz, Patrik; Holzapfel, Michael
Vortrag
Presentation
2020 Entwicklung eines Modells zur performanten elektrisch-thermisch gekoppelten Simulation von am Ableiter temperierten Lithium-Ionen-Batteriezellen zur Bewertung des Thermomanagements von Traktionsbatterien
Ulrich, Julian
Master Thesis
2020 Entwicklung von maßgeschneiderten PHB-Kompositen für technische Anwendungen. PHB2MARKET
Moser, Kevin; Holzer, Andrei; Meijer, Daniela
Bericht
Report
2020 Evaluating Current Distribution and Influence of Defect Sites for Graphitic Compound Bipolar Plate Materials
Baumann, Nils; Blankenship, A.; Dorn, M.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2020 Experimental and numerical investigations of pressure-controlled resin transfer molding (PC-RTM)
Seuffert, J.; Rosenberg, Philipp; Kärger, L.; Henning, Frank; Kothmann, M.H.; Deinzer, G.
Zeitschriftenaufsatz
Journal Article
2020 Experimental Investigation of the Ignitor Plume/Probellant Interaction
Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2020 Formed Pultrusion Profiles. Wrinkle-Free Forming of Pultruded Hollow Profiles by Local Stretch Bending
Haas, Jonathan; Bose, Bernard
Zeitschriftenaufsatz
Journal Article
2020 Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2019/2020
Jahresbericht
Annual Report
2020 Funktionalisierung aromatischer Diamine aus dem chemischen PUR-Recycling
Springsklee, Lukas
Master Thesis
2020 Geformte Pultrusionsprofile. Faltenfreie Umformung pultrudierter Hohlprofile durch lokales Streckbiegen
Haas, Jonathan; Bose, Bernard
Zeitschriftenaufsatz
Journal Article
2020 Halfway to Technical Stereocomplex PLA Products - an Arduous Path to a Breakthrough
Tarkhanov, Evgueni; Lehmann, André; Menrath, Andreas
Zeitschriftenaufsatz
Journal Article
2020 Handbuch Leichtbau. Methoden, Werkstoffe, Fertigung. 2., überarbeitete und erweiterte Auflage
Sammelband
Anthology
2020 Healthy power: Reimagining hospitals as sustainable energy hubs
Gurieff, Nicholas; Green, Donna; Koskinen, Ilpo; Lipson, Mathew; Baldry, Mark; Maddocks, Andrew; Menictas, Chris; Noack, Jens; Moghtaderi, Behdad; Doroodchi, Elham
Zeitschriftenaufsatz
Journal Article
2020 Impact of Surface Functionalization on the Intrinsic Properties of the Resulting Fe-N-C Catalysts for Fuel Cell Applications
Kübler, M.; Wagner, S.; Jurzinsky, T.; Paul, S.; Weidler, N.; Gomez Villa, Eduardo Daniel; Cremers, Carsten; Kramm, U.I.
Zeitschriftenaufsatz
Journal Article
2020 Implications of Testing a Zinc-Oxygen Battery with Zinc Foil Anode Revealed by Operando Gas Analysis
Dongmo, Saustin; Stock, Daniel; Jakob, Julian; Kreissl, Alexander; Groß, Martin Florian; Weixler, Sophie; Hagen, Markus; Miyazaki, Kohei; Abe, T.; Schröder, D.
Zeitschriftenaufsatz
Journal Article
2020 Improving the Design and Evaluation of PDV-Based Cylinder Test Experiments for JWL-Parameter Determination
Baust, Tobias Michael
Zeitschriftenaufsatz
Journal Article
2020 Influence of the Temperature on Coccolith-Containing Systems from Emiliania huxleyi Cultivations
Chairopoulou, Makrina Artemis; Kratzer, Fabian; Gross, Roland; Herrmann, Michael; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2020 Investigation and Optimization of Pt/IrO2 Catalyst for Unitized Regenerative PEM Fuel Cells
Kühne, P.; Wenske, M.; Wolter, M.; Baumann, N.
Konferenzbeitrag
Conference Paper
2020 Investigation of SMC Flame Retardants for Application in Battery electric Vehicles
Griesbaum, Patrick; Höhne, Carl-Christoph; Wallat, Leonie; Henning, Frank; Huber, Timo; Yu, Wenjun
Konferenzbeitrag
Conference Paper
2020 Jet Dispersion of Multiwall Carbon Nanotubes and Correlation with Suspension Rheology
Dresel, Alexander; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2020 Konsolidierungsmaßnahmen zur Verbesserung der mechanischen Eigenschaften in Lagengrenzbereichen der 3D Skelett Wickeltechnik
Mühlecker, Alexander
Master Thesis
2020 Konzeptionierung und Analyse eines langfaserverstärkten Getriebedeckels für ein Elektrofahrzeug
Zeller, Tobias
Master Thesis
2020 Macroscopic friction value control by electrochemical potentials with ionic liquids
Gatti, Felix; Amann, Tobias; Kailer, Andreas; Abicht, Johannes; Rabenecker, Peter; Balters, Norman; Rühe, Jürgen
Konferenzbeitrag
Conference Paper
2020 Manufacturing Innovation. Continuous ultrasonic welding of thermoplastic composites LCI Modelling for the Eco-Statement
Jongbloed, Bram; Villegas, Irene Fernandez; Salles, Ana; Lätsch, Corinna; Reichert, Thomas; Gess, Andreas; Pfeuffer, Simon
Poster
2020 Material modeling in forming simulation of three-dimensional fiber-metal-laminates - A parametric study
Werner, Henrik; Poppe, Christian; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2020 Mechanistic Insights into the Lithiation and Delithiation of Iron-Doped Zinc Oxide: The Nucleation Site Model
Asenbauer, Jakob; Hoefling, Alexander; Indris, Sylvio; Tübke, Jens; Passerini, Stefano; Bresser, Dominic
Zeitschriftenaufsatz
Journal Article
2020 Membranes for zinc-air batteries: Recent progress, challenges and perspectives
Tsehaye, Misgina Tilahun; Alloin, Fannie; Iojoiu, Cristina; Tufa, Ramato Ashu; Aili, David; Fischer, Peter; Velizarov, Svetlozar G.
Zeitschriftenaufsatz
Journal Article
2020 Messtechnische Charakterisierung und dynamische Simulation von Kunststoffbauteilen
Georgi, Tom; Troge, Jan; Kranz, Burkhard; Diemert, Jan
Konferenzbeitrag
Conference Paper
2020 Metal-Organic Framework-Based Catalysts for Oxidative Desulfurization
Piscopo, Calogero; Granadeiro, Carlos M.C.E.; Balula, Salete S.; Boskovic, Dusan
Zeitschriftenaufsatz
Journal Article
2020 Mikrowellenpyrolyse von carbonfaserhaltigen Kunststoffen als Recyclingoption
Seiler, Elisa; Urban, Helfried; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2020 Novel SERS-based process analysis for label-free segmented flow screenings
Mendl, Alexander; Köhler, Michael; Boskovic, Dusan; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2020 On the applicability of thermoforming characterization and simulation approaches to glass mat thermoplastic composites
Dörr, Dominik; Gergely, Ryan; Ivanov, Stanislav; Kärger, Luise; Henning, Frank; Hrymak, Andrew
Zeitschriftenaufsatz
Journal Article
2020 Optimization of electrolyte composition for the all-iron hybrid flow battery
Berkers, Willem Max
Master Thesis
2020 Organische Sulfide und Disulfide von s-Triazin und s-Heptazin und deren Potential als Flammschutzmittel
Höhne, Carl-Christoph
Dissertation
Doctoral Thesis
2020 Ortsaufgelöste Untersuchungen an Redox-Flow-Batterien
Gerber, Tobias
Dissertation
Doctoral Thesis
2020 Parameter Identification of Fiber Orientation Models Based on Direct Fiber Simulation with Smoothed Particle Hydrodynamics
Meyer, Nils; Saburow, Oleg; Hohberg, Martin; Hrymak, Andrew; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2020 PEM‐Fuel Cell Catalyst Behavior between Room Temperature and Freezing Point
Kunkel, Robin; Baumann, Nils; Jurzinsky, Till; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2020 Performance Parameters of Inductively Coupled Plasma Optical Emission Spectrometry and Graphite Furnace Atomic Absorption Spectrometry Techniques for Pd and Pt Determination in Automotive Catalysts
Senila, M.; Cadar, O.; Senila, L.; Böringer, Sarah; Seaudeau-Pirouley, K.; Ruiu, A.; Lacroix-Desmazes, P.
Zeitschriftenaufsatz
Journal Article
2020 Performance study of a PMSM with molded stator and composite housing with internal slot cooling - resulting in high continuous power
Reuter, S.; Keyser, H. de; Doppelbauer, M.
Konferenzbeitrag
Conference Paper
2020 Polymer Engineering 1
Eyerer, Peter; Schüle, Helmut
Buch
Book
2020 Polymer Engineering 2
Sammelband
Anthology
2020 Polymer Engineering 3
Sammelband
Anthology
2020 Process Chain Optimization for SWCNT/Epoxy Nanocomposite Parts with Improved Electrical Properties
Morais, Manuel V.C.; Marcellan, Marco; Sohn, Nadine; Hübner, Christof; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2020 Processing relationships of hybrid polymer-metal composites in the injection moulding process
Schwarz, Angela; Liebig, Wielfried; Weidenmann, Kay; Elsner, Peter
Konferenzbeitrag
Conference Paper
2020 Promising polymer-assisted extraction of palladium from supported catalysts in supercritical carbon dioxide
Ruiu, A.; Bauer-Siebenlist, B.; Senila, M.; Jänisch, T.; Foix, D.; Seaudeau-Pirouley, K.; Lacroix-Desmazes, P.
Zeitschriftenaufsatz
Journal Article
2020 Quo vadis, Nanosilber-Technologie?
Schmid, Helmut
Vortrag
Presentation
2020 Reactive Extrusion of TPU. Production of Thermoplastic Polyuerthanes with Reduced Carbon Footprint
Buczko, Aleksandra; Holzer, Andrei; Kemmerling, Simon
Zeitschriftenaufsatz
Journal Article
2020 Reaktive Extrusion von TPU. Herstellung von thermoplastischen Polyurethanen mit reduziertem CO2-Fußabdruck
Buczko, Aleksandra; Holzer, Andrei; Kemmerling, Simon
Zeitschriftenaufsatz
Journal Article
2020 Recycling von marinen Sekundärrohstoffen
Chairopoulou, Makrina A.; Schreiber, Alex; Kratzer, Fabian; Wolf, Sebastian; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2020 Recycling von PUR-Composite durch Glykolyse
Brantsch, Peter
Master Thesis
2020 Reductive Electrochemical Synthesis of Polyvanillin from Biobased Vanillin
Kunkel, Robin; Schmidt, Volkmar M.; Cremers, Carsten; Müller, Dominik; Schmiedl, Detlef; Tübke, Jens
Poster
2020 Rheologische Untersuchungen an Harzsystemen für den Einsatz in selbstdichtenden RTM-Werkzeugen
Decker, Hannah
Bachelor Thesis
2020 Rohstoffinnovationen und Rohstoffeffizienz. Editorial
Teipel, Ulrich; Schweppe, Rainer
Editorial
2020 Shape Memory Polymer Foam with Programmable Apertures
Walter, Mario; Friess, Fabian; Krus, Martin; Hassan Zolanvari, Seyed Mohammad; Grün, Gunnar; Kröber, Hartmut; Pretsch, Thorsten
Zeitschriftenaufsatz
Journal Article
2020 Simultaneous identification of wind turbine vibrations by using seismic data, elastic modeling and laser Doppler vibrometry
Zieger, Toni; Nagel, S.; Lutzmann, Peter; Kaufmann, Ilja; Ritter, J.; Ummenhofer, T.; Knödel, P.; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2020 Strategies to Enhance Carbon Dioxide Capture in Metal-Organic Frameworks
Piscopo, Calogero; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2020 Studies on Fe/Fe Redox Flow Batteries with Recombination Cell
Noack, Jens; Wernado, Mike; Roznyatovskaya, Nataliya; Ortner, Jens; Pinkwart, Karsten
Zeitschriftenaufsatz
Journal Article
2020 Synthesis of novel bisphosphorylimides based on Staudinger reaction
Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred
Zeitschriftenaufsatz
Journal Article
2020 The Influence of Free Acid in Vanadium Redox‐Flow Battery Electrolyte on "Power Drop" Effect and Thermally Induced Degradation
Roznyatovskaya, Nataliya; Fühl, Matthias; Roznyatovsky, Vitaly A.; Noack, Jens; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2020 The ray tracing based tool for generation artificial images and neural network training
Kolker, A.; Oshchepkova, S.; Pershina, Z.; Dimitrov, L.; Ivanov, V.; Rashid, A.; Bdiwi, M.
Konferenzbeitrag
Conference Paper
2020 Towards programmable friction: Control of lubrication with ionic liquid mixtures by automated electrical regulation
Gatti, F.; Amann, T.; Kailer, A.; Baltes, N.; Rühe, J.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2020 Untersuchungen zum Oxidationsverhalten von TiC- und ZrC-Partikeln
Kuchenreuther-Hummel, Veronica
Dissertation
Doctoral Thesis
2020 Use of carbon additives towards rechargeable zinc slurry air flow batteries
Choi, Nak Heon; Olmo, Diego del; Milian, Diego; Kissi, Nadia el; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2020 Vibroacoustic characterisation methods for polymer materials and components
Rohlfing, Jens; Diemert, Jan; Lüssenheide, Susanne; Abdul Hamid, Z.M.; Hohe, J.; Kranz, B.; Georgi, Tom
Konferenzbeitrag
Conference Paper
2020 Werkstoffliche Aufbereitung von Wärmedämmverbundsystemen
Fehn, Thomas; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2019

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2019 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2019 4-Amino-1-butyl-1,2,4-triazolium Nitrate - Synthesis and Characterization
Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Hürttlen, Jürgen
Zeitschriftenaufsatz
Journal Article
2019 5. Symposium Rohstoffinnovationen und Rohstoffeffizienz 2019
Tagungsband
Conference Proceeding
2019 60 Years of Fraunhofer ICT: 60 Years of Applied Research and Development in Energetic Materials and Systems
Elsner, Peter; Eckl, Wilhelm; Löbbecke, Stefan
Editorial
2019 9th European Weathering Symposium, EWS 2019
Tagungsband
Conference Proceeding
2019 A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
Dörr, Dominik; Joppich, Tobias; Kugele, Daniel; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2019 A machine learning assisted approach for textile formability assessment and design improvement of composite components
Zimmerling, Clemens; Dörr, Dominik; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2019 An experimental and numerical survey into the potential of hybrid foams
Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan
Zeitschriftenaufsatz
Journal Article
2019 Application of azide-containing molecules as modifiers of HTPB: Synthesis and evaluation of properties
Lemos, Mauricio Ferrapontoff; Mendes, Luis Claudio; Bohn, Manfred; Keicher, Thomas
Zeitschriftenaufsatz
Journal Article
2019 Assessing the structural integrity of carbon-fibre sandwich panels in fire: Bench-scale approach
Schartel, B.; Humphrey, J.K.; Gibson, A.G.; Hörold, A.; Trappe, V.; Gettwert, Volker
Zeitschriftenaufsatz
Journal Article
2019 Auf dem Weg zu einer geräteflexiblen, automatisierten Datenauswertung von Batterien und Brennstofzellen ("Batalyse")
Hagen, Marcus; Nave, Eran; Tübke, Jens
Vortrag
Presentation
2019 Aufbau eines Versuchstandes zur Validierung der Strömungssimulation eines otto-motorischen Kühlkonzeptes, welcher nach SLM-Richtlinien entwickelt ist
Abdelkefi, Mahdi
Master Thesis
2019 Aufbau und Inbetriebnahme der QCM-Messanlage als Screeningtool für die Adsorptionseigenschaften selektiver Materialien
Souvannavong, Naryvone
Bachelor Thesis
2019 Auslegung und Aufbau eines T-History-Kalorimeters für die Charakterisierung von Phasenwechselmaterialien von -40°C bis 250°C
Wegner, Jakob
Bachelor Thesis
2019 Beobachtung des Schädigungsverhaltens von Aluminiumkolben unter TMF- und überlagerter TMF/HCF-Belastung
Vogt, Matthias
Bachelor Thesis
2019 Betauung im Bereich der Umweltsimulation - Ein Beitrag zur Validierung des Normentwurfs [E] DIN EN 60068-2-84
Bott, P.; Schmitt, T.; Cäsar, Joachim
Konferenzbeitrag
Conference Paper
2019 Brennstoffzellen- und Batteriefahrzeuge. Bedeutung für die Elektromobilität
Belmer, Frank; Bensmann, Boris; Brandt, Torsten; Cremers, Carsten; Derflinger, Monika; Hanke-Rauschenbach, Richard; Grube, Thomas; Heinzel, Angelika; Horenkamp, W.; Jungmann, T.; Kaimer, S.; Karzel, P.; Kleimaier, M.; Lettenmeier, P.; Pokojski, M.; Sandstede, G.; Suermann, M.; Unwerth, T. von; Wolf, E.
Studie
Study
2019 Cathode plasma electrolysis in diluted potassium hydroxide solutions: Particles formation and energetic estimation
Gromov, Alexander; Nalivaiko, Anton; Fehn, Thomas; Yahya, Dewi Puspa Muhammad; Osipenkova, Alexandra; Koleczko, Andreas; Knapp, Sebastian; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2019 Characteristics of the electroosmotic flow of non-aqueous electrolyte systems
Müller, Dominik
Konferenzbeitrag
Conference Paper
2019 Characterizing of glass-rubber transition shift in filled HTPB-IPDI formulations by modified and normal Arrhenius equation
Bohn, Manfred; Ferrapontoff, Mauricio; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2019 Chemical Kinetics of the Oxidation of Manganese and of the Decomposition of MnO2 by XRD and TG Measurements
Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike; Fietzek, Harald
Zeitschriftenaufsatz
Journal Article
2019 Chemical Recycling of post-consumer Mattress Materials
Hanich, Ronny
Konferenzbeitrag
Conference Paper
2019 Coating of ammonium salt particles by fluidized bed processes
Dresel, Alexander; Busch, Konstantin; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2019 Combined in situ X-ray computed tomography and acoustic emission analysis for composite characterization - A feasibility study
Bartkowiak, M.; Schoettl, L.; Elsner, P.; Weidenmann, K.A.
Konferenzbeitrag
Conference Paper
2019 Comprehensive determination of heat generation and thermal modelling of a hybrid capacitor
Miller, Martin; Baltes, Norman; Rabenecker, Peter; Hagen, Markus; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2019 Compression RTM of reactive thermoplastic composites using microwaves and cure monitoring
Pantelelis, Nikos; Bistekos, Efthymios; Emmerich, Rudolf; Gerard, Pierre; Zoller, Alexander; Gallardo, Rocio Ruiz
Zeitschriftenaufsatz
Journal Article
2019 Continuous Flow Desulfurization of a Model Fuel Catalysed by Titanium Functionalized UiO‐66
Piscopo, Calogero; Voellinger, L.; Schwarzer, Maud; Polyzoidis, Angelos; Boskovic, Dusan; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2019 Continuous microfluidic process for formation of ADN-Prills
Radulescu, Ligia; Eberhardt, Angelika; Boskovic, Dusan
Konferenzbeitrag
Conference Paper
2019 Customized Design of Scalable Microfluidic Droplet Generators Using Step-Emulsification Methods
Eberhardt, Angelika; Boskovic, Dusan; Löbbecke, Stefan; Panic, Slobodan; Winter, Yannik
Zeitschriftenaufsatz
Journal Article
2019 Deaktivierbare Klebstoffe zur Wiederverwertung von Wärmedämmverbundsystemen -WDVS-Deaktiv-
Sims, Stefan; Urban, Helfried; Stier, Christian
Bericht
Report
2019 Decomposition kinetics of RDX in cyclohexanone and gamma-butyrolactone determined with ARC and HFMC
Bohn, Manfred A.
Vortrag
Presentation
2019 Der modulare Gedanke. Entwicklung einer Anlage für die Produktion hybrider Faserverbund-Bauteile
Joppich, Tobias; Kilian, Sascha
Zeitschriftenaufsatz
Journal Article
2019 Design and development of an electrolyte regeneration process for vanadium redox flow batteries
Poli, Nicola
Master Thesis
2019 Design und Materialcharakterisierung poröser Transportschichten für die PEM-Wasserelektrolyse
Ernst, Matthias
Master Thesis
2019 Design, manufacturing and mechanical investigation of a complex structural PPS injection molded part with 3D wound continuous fibers reinforcement
Tawfik, Hussam
Master Thesis
2019 Designverifikation eines hochausgenutzten Elektromotors mit innenliegender Kühlung und duroplastischem Leichtbaugehäuse
Suppanz, Joseph
Master Thesis
2019 Detection of unstable process conditions during continuous nitrate ester production
Mendl, Alexander; Panic, Slobodan; Klahn, Thorsten; Boskovic, Dusan
Konferenzbeitrag
Conference Paper
2019 Development of a modular draping test bench for analysis of infiltrated woven fabrics in wet compression molding
Albrecht, F.; Zimmerling, C.; Poppe, C.; Kärger, L.; Henning, F.
Konferenzbeitrag
Conference Paper
2019 Development of a property forecast tool for flexible compositions of Li-ion batteries, including raw material availability and price forming
Krsmanovic, Dejana
Master Thesis
2019 Die Integration von Fragestellungen der Circular Economy in die Ökobilanzierung
Dieterle, Michael; Viere, Tobias
Aufsatz in Buch
Book Article
2019 Digitale Zwillinge
Cäsar, Joachim
Konferenzbeitrag
Conference Paper
2019 Dispergierung und rheologische Eigenschaften von Carbon Nanotube-Suspensionen
Dresel, Alexander
Dissertation
Doctoral Thesis
2019 Distribution of nitroglycerine in different ball propellants - chemometric evaluation
Kaiser, Mannfred; Schweikert, Wenka; Boskovic, Dusan
Konferenzbeitrag
Conference Paper
2019 Dithiocyanurates and thiocyamelurates: Thermal thiyl radical generators as flame retardants in polypropylene
Höhne, Carl-Christoph; Posern, C.; Böhme, U.; Eichler, F.; Kroke, E.
Zeitschriftenaufsatz
Journal Article
2019 Dreidimensionale Faserskelette
Beck, Björn; Haas, Jonathan; Tawfik, Hussam
Zeitschriftenaufsatz
Journal Article
2019 Durchgangswiderstand von Staubschüttungen - Messverfahren und Einflussgrößen
Teipel, Ulrich; Wolf, Sebastian; Schreiber, Alex
Konferenzbeitrag
Conference Paper
2019 Effects on Progression Rate of Thermite Pellets
Knapp, Sebastian; Kelzenberg, Stefan; Becker, Wolfgang; Lity, André; Roth, Evelin; Wacker, Karin; Weiser, Volker
Konferenzbeitrag
Conference Paper
2019 Einsetzbarkeit der Biopolyole aus Pflanzenölen auf der Darstellung von PUR-Weichschaum
Zhang, Lin
Master Thesis
2019 Electrochemical stability of silica-templated polyaniline-derived mesoporous N-doped carbons for the design of Pt-based oxygen reduction reaction catalysts
Melke, J.; Schuster, Robin; Möbus, Sascha; Jurzinsky, Tilman; Elsässer, Patrick; Heilemann, Axel; Fischer, Anna
Zeitschriftenaufsatz
Journal Article
2019 Electrochemical Vanillin Conversion for Biobased polymer Synthesis - Monitoring via Capillary Electrophoresis
Kunkel, Robin; Müller, Dominik
Konferenzbeitrag
Conference Paper
2019 Elektrisch leitfähige Kontaktplatte für elektrochemische Zellen, elektrochemische Zelle mit einer solchen Kontaktplatte sowie Verfahren zu deren Herstellung
Caglar, Burak; Fischer, Peter; Hübner, Christof; Tübke, Jens; Weiss, Patrick
Patent
2019 Emission Spectroscopy of the Combustion Flame of Aluminium/Copper Oxide Thermite
Knapp, Sebastian; Kelzenberg, Stefan; Raab, Angelika; Roth, Evelin; Weiser, Volker
Zeitschriftenaufsatz
Journal Article
2019 End of Life Innovation - Aircraft Interior Polyurethane Recycling Preparation of the Eco-Statement
Hanich, Ronny; Höhne, Carl-Christoph; Salles, Ana; Brantsch, Peter
Poster
2019 Energetic materials. Past, present and future
Tagungsband
Conference Proceeding
2019 Entwicklung einer Methode zur Charakterisierung der oberflächlichen makroskopischen Rovingorientierung bei unidirektional endlosfaserverstärkten Verbundwerkstoffen
Sauerwein, Vladimir
Master Thesis
2019 Entwicklung einer RTM Prozessvariante zur kavitätsdruckgeregelten Herstellung von Faserverbundstrukturbauteilen
Rosenberg, Philipp
Dissertation
Doctoral Thesis
2019 Entwicklung eines Funktionsmusters einer Direktwasserstoffperoxid-Brennstoffzelle zur Bereitstellung von Sauerstoff und elektrischer Energie für Unterwasseranwendungen
Cremers, Carsten; Kintzel, Birgit; Meier, Jan
Studie
Study
2019 Entwicklung eines Verbrennungsmodells für wasseremulgierte Flüssigbrennstoffe
Baust, Tobias Michael
Dissertation
Doctoral Thesis
2019 Environment-Friendly Composite Propellants Based on Ammonium Dinitramide
Gettwert, Volker; Weiser, Volker; Tagliabue, Claudio; Hafner, Sven; Fischer, Sebastian
Zeitschriftenaufsatz
Journal Article
2019 Environmental factors and their impact on the transition, safety and function of selected processes, systems and products
Schmid, Helmut
Konferenzbeitrag
Conference Paper
2019 Experimental and numerical study of the spring-in of angled brackets manufactured using different resins and fiber textiles
Bernath, A.; Groh, F.; Exner, W.; Hühne, C.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2019 Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process
Rupp, Peter; Elsner, Peter; Weidenmann, K.A.
Zeitschriftenaufsatz
Journal Article
2019 Fast processing and continuous simulation of automotive structural composite components
Henning, Frank; Kärger, L.; Dörr, D.; Schirmaier, F.J.; Seuffert, J.; Bernath, A.
Zeitschriftenaufsatz
Journal Article
2019 Fast reaction screening combining segmented flow microfluidics and surface enhanced raman spectroscopy
Mendl, A.; Köhler, M.; Boskovic, D.
Konferenzbeitrag
Conference Paper
2019 Flow measurement inside a zinc-nickel flow cell battery using FBG based sensor system
Vidakovic, M.; Rente, B.; Fabian, M.; Li, X.; Fisher, P.; Li, K.; Sun, T.; Grattan, K.T.V.
Konferenzbeitrag
Conference Paper
2019 Fractionation of three different lignins by thermal separation techniques
Rohde, Viktoria; Böringer, Sarah; Tübke, Beatrice; Adam, Christian; Dahmen, Nicolaus; Schmiedl, Detlef
Zeitschriftenaufsatz
Journal Article
2019 Fraunhofer Institute for Chemical Technology. Annual Report 2018/2019
Jahresbericht
Annual Report
2019 Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2018/2019
Jahresbericht
Annual Report
2019 Functionalization of multi-walled carbon nanotubes with indazole
Jurzinsky, T.; Gomez Villa, Eduardo Daniel; Kübler, M.; Bruns, M.; Elsässer, P.; Melke, J.; Scheiba, F.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2019 Funktionsintegrierte Duromere Faserverbundwerkstoffe für neue Anwendungen
Griesbaum, Patrick; Ilinzeer, Sergej; Maertens, Robert; Laux, Marcel
Zeitschriftenaufsatz
Journal Article
2019 Funktionsprototypenentwicklung von Wärmespeichersystemen mittels Fused Filament Fabrication
Salehi, Simon
Bachelor Thesis
2019 Grundlagen und Verfahren zur profilierten Erwärmung von PET-Preforms mit Mikrowellen
Graf, Matthias Harald
Dissertation
Doctoral Thesis
2019 Herstellung und Eigenschaften neuartiger Compounds zur additiven Fertigung poröser Transportschichten für die PEM-Wasserelektrolyse
Maletzko, Annabelle
Master Thesis
2019 Herstellung, Optimierung und Charakterisierung von thermoplastischen Schaumstoffen, vor dem Hintergrund der Einstellbarkeit von Zellgröße und Offenzelligkeit
Hofmann, Heiko
Master Thesis
2019 HMX crystal topography investigated by means of atomic force microscopy and confocal microscopy
Herrmann, Michael; Weyrauch, Hubert
Konferenzbeitrag
Conference Paper
2019 Hochleistungsfähige und alterungsstabile HT-PEMFC Membranelektrodeneinheiten durch neue Anbindungskonzepte Katalysator/Träger/Protonenleiter (HT-Linked)
Cremers, Carsten; Jurzinsky, Tilman; Baumann, Nils
Bericht
Report
2019 Hybrid Composites for Automotive Applications - Development and Manufacture of a System-integrated Lightweight floor Structure in multi-material Design
Link, Tobias; Behnisch, Felix; Rosenberg, Philipp; Seuffert, Julian; Dörr, Dominik; Hohberg, Martin; Joppich, Tobias; Henning, Frank
Konferenzbeitrag
Conference Paper
2019 Igniter Compositions for Lova and Double-Base Propellants Containing
Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Roth, Evelin
Zeitschriftenaufsatz
Journal Article
2019 Ignition of flare propellants using AL/NI-Nanofoils at sub-atmospheric pressure
Weiser, Volker; Roth, Evelin; Knapp, Sebastian; Lity, A.
Konferenzbeitrag
Conference Paper
2019 Improving the Processability of Graphene Nanoplatelets in Polyamide 6 during Melt Compounding Extrusion
Blanco-Villalba, José Francisco; Recio, Imanol; Gómez-Cordón, Julio; Hübner, Christof
Konferenzbeitrag
Conference Paper
2019 Influence of glyoxal on curing of urea-formaldehyde resins
Perminova, D.A.; Malkov, V.S.; GusChin, V.; Eisenreich, N.
Zeitschriftenaufsatz
Journal Article
2019 Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior
Wittemann, Florian; Maertens, Robert; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2019 Insassen-Rückhaltesystem mit einem von einem Treibladungssatz aufblasbaren Prallkissen, Prallkissen eines solchen Rückhaltesystems und Verfahren zu dessen Aufblasen
Eckl, Wilhelm; Schmid, Helmut; Scholz, Peter
Patent
2019 Interaction parameters in plasticizer-plasticizer-mixtures
Mitró, Daniel; Böhnlein-Mauß, Jutta; Pfatteicher, Axel
Konferenzbeitrag
Conference Paper
2019 Internal Plasticized Glycidyl Azide Copolymers for Energetic Solid Propellant Binders
Hafner, Sven
Dissertation
Doctoral Thesis
2019 Interpreting LCA results from a life cycle and circular economy perspective: Application of the life cycle gap-analysis
Dieterle, Michael; Viere, Tobias
Konferenzbeitrag
Conference Paper
2019 Investigation of Crystallisation Conditions to Produce CL-20/HMX Cocrystal for Polymer-bonded Explosives
Herrmannsdörfer, Dirk; Gerber, Peter; Heintz, Thomas; Herrmann, Michael; Klapötke, Thomas
Zeitschriftenaufsatz
Journal Article
2019 Investigation of the microstructure of ADN-Prills using 2D-X-Ray diffraction
Kempa, Paul-Bernd; Fietzek, Harald; Herrmann, Michael; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2019 Investigations of ETPE formulations for additive manufacturing
Schaller, Uwe; Mitró, Daniel; Böhnlein-Mauß, Jutta; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2019 Kinetic study on some cases of the curing reaction behaviour of A-B systems with A and B as isocyanate and polyol or amine and epoxide
Bohn, Manfred
Konferenzbeitrag
Conference Paper
2019 Kombination von Sheet und Bulk Molding Compound in Jutefaserverbunden
Lautenschläger, Miriam Isabell
Dissertation
Doctoral Thesis
2019 Konzeptionierung eines Duroplast-Aluminium Hybrid-Kurbelgehäuses auf Basis eines Reihenvierzylinder Dieselmotors
Bucherer, Sebastian
Master Thesis
2019 Lifetime of airbag inflators: Perspectives for a better understanding and prediction of aging mechanisms
Yurrita, Pedro; Kuchenreuther-Hummel, Veronica; Pietsch, Erik; Bermejo, Jorge
Konferenzbeitrag
Conference Paper
2019 Lignin Oxidation for the Exploitation of High Value Oligomer Building Blocks
Jänisch, Thorsten
Vortrag
Presentation
2019 Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Abicht, Johannes; Rabenecker, P.; Baltes, N.; Rühe, J.
Zeitschriftenaufsatz
Journal Article
2019 Manufacturing Innovation. Additive Layer Manufacturing (ALM) Preparation for the eco-statement
Hoschke, Klaus; Kilchert, Sebastian; Salles, Ana
Poster
2019 Manufacturing Innovation. Automated Fibre Placement (AFP) Preparation for the eco-statement
Zenker, Thomas; Salles, Ana; Brantsch, Peter
Poster
2019 Material Innovation. Renewable polyurethane foam for interior application
Salles, Ana; Hanich, Ronny; Höhne, Carl-Christoph
Poster
2019 Maßnahmen zur Reduktion der Ausschussquote bei der Produktion von Lithium-Ionen Zellen
Hilger, Celine
Bachelor Thesis
2019 Mechanical properties of foamed long glass fiber reinforced polyphenylene sulfide integral sandwich structures manufactured by direct thermoplastic foam injection molding
Lohr, C.; Beck, Björn; Henning, Frank; Weidenmann, K.A.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2019 Mechanische Aufbereitung von Post Consumer Poly(lactic acid) am Beispiel von Einweggetränkebechern
Ginter, Jannis
Master Thesis
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2019 Methodenentwicklung zur Charakterisierung der Aushärtung duromerer Komposite mittels dielektrischer Analyse
Ricker, Daniel
Master Thesis
2019 Modelling of Al/MnO2 and Ti/MnO2 Thermite Mixtures
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker
Zeitschriftenaufsatz
Journal Article
2019 Modelling of the heat transfer coefficient in a nozzle bomb for gun propellant erosivity studies
Bermejo, Jorge; Yurrita, Pedro
Konferenzbeitrag
Conference Paper
2019 Modified and normal Arrhenius equation to characterize glass-rubber transition shifts in filled HTPB-IPDI formulations
Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2019 Modular Thinking. Development of a Production Plant for Hybrid Fiber Composite Components
Kilian, Sascha; Joppich, Tobias
Zeitschriftenaufsatz
Journal Article
2019 Molecularly Imprinted Sol-Gel for TNT Detection with Optical Micro-Ring Resonator Sensor Chips
Eisner, Ludmila; Wilhelm, Isabel; Flachenecker, Günter; Hürttlen, Jürgen; Schade, Wolfgang
Zeitschriftenaufsatz
Journal Article
2019 Multi-year project: Explosive trace detection sensor (extras)
Palucci, A.; Colao, F.; Milovan, S.; Kolobrodov, V.; Boonaker, B.; Schnürer, Frank; Stifini, C.; Carnevale, L.; Cassioli, L.C.L.; Muro, S. de; Antuofermo, P.
Aufsatz in Buch
Book Article
2019 New Approach for the Efficient Attainment of Flame Retardancy Using Multi Component Injection Molding
Schneider, Dorothea; Hübner, Christof; Bourbigot, Serge
Konferenzbeitrag
Conference Paper
2019 Novel N-Phosphorylated Iminophosphoranes as Efficient Flame Retardants in Epoxy Resins and Composites
Weber, Lais; Weinert, Michael; Döring, Manfred
Poster
2019 Numerical modeling of a hybrid forming process for three-dimensionally curved fiber-metal laminates
Werner, Henrik O.; Dörr, Dominik; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2019 On the effect of electric field application during the curing process on the electrical conductivity of single-walled carbon nanotubes-epoxy composites
Morais, Manuel V.C.; Oliva-Aviles, A.I.; Matos, M.A.S.; Tagarielli, V.L.; Pinho, S.T.; Hübner, Christof; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2019 On the relevance of thermomechanics and crystallization kinetics for FE thermoforming simulation of semi-crystalline thermoplastic tapes
Dörr, Dominik; Kugele, Daniel; Joppich, Tobias; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2019 Optimierung eines säure-katalysierten Ethanol-Wasser Organosolv-Prozesses für die Biomassen Pappel mit Rinde und Miscanthus G. in Hinblick auf Ligninfraktionierung und -funktionalisierung
Rohde, Viktoria
Dissertation
Doctoral Thesis
2019 Oxidation kinetic studies of tic-particles using x-ray diffraction
Kuchenreuther-Hummel, Veronica
Konferenzbeitrag
Conference Paper
2019 Particle properties and crystalline structure of ADN-Prills
Heintz, Thomas; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2019 Polymer-steel-sandwich-structures: Influence of process parameters on the composite strength
Lohr, C.; Muth, M.; Dreher, R.; Zinn, C.; Elsner, P.; Weidenmann, K.A.
Konferenzbeitrag
Conference Paper
2019 Pressure and Temperature Dependency of ADN-based Solid Rocket Propellants
Imiolek, Andreas; Becker, Wolfgang; Weiser, Volker; Bieroth, Diana
Konferenzbeitrag
Conference Paper
2019 Process Development for Chemical Recycling of Bio-based Polymers
Majgaonkar, Pranav
Master Thesis
2019 Processing of plastic bonded explosives with new mixing technologies
Gerber, Peter; Happ, Andreas
Konferenzbeitrag
Conference Paper
2019 Progress in Additive Manufacturing of Energetic Materials: Creating the Reactive Microstructures with High Potential of Applications
Muravyev, N.V.; Monogarov, K.A.; Schaller, Uwe; Fomenkov, I.V.; Pivkina, A.N.
Zeitschriftenaufsatz
Journal Article
2019 Properties and Structure of ADN-Prills
Heintz, Thomas; Herrmann, Michael
Zeitschriftenaufsatz
Journal Article
2019 Prozess-Struktur-Eigenschafts-Beziehungen hybrider Polymer-Metall-Verbundstrukturen aus dem Spritzgießprozess
Schwarz, Angela
Master Thesis
2019 Prozessierung hochgefüllter Kunststoffe mittels Werkstoffextrusion
Mitró, Daniel; Schaller, Uwe
Poster
2019 Reaktoren für spezielle technisch-chemische Prozesse: Mikrostrukturreaktoren
Boskovic, Dusan
Aufsatz in Buch
Book Article
2019 Rechnerische Bewertung der Bauteillebensdauer von Aluminiumgusskomponenten unter kombinierter thermomechanischer und hochfrequenter Belastung
Fischer, C.; Schweizer, C.; Mittag, S.; Seifert, T.; Elsner, Peter
Bericht
Report
2019 Recocido subcrítico de aceros de alta resistencia y estudio de su comportamiento frente al desgaste provocado por la combustión de explosivos
Bermejo Sanz, Jorge
Dissertation
Doctoral Thesis
2019 Recycled Poly(Ethylene Terephthalate)/Clay Nanocomposites
Chowreddy, R.R.; Nord-Varhaug, K.; Rapp, F.
Zeitschriftenaufsatz
Journal Article
2019 Segmented Printed Circuit Board Electrode for Locally-Resolved Current Density Measurements in All-Vanadium Redox Flow Batteries
Gerber, Tobias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2019 Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR
Jänisch, Thorsten
Vortrag
Presentation
2019 Separation of volatile fatty acids from biogas plant hydrolysates
Jänisch, Thorsten; Reinhardt, Sebastian; Pohsner, Ute; Böringer, Sarah; Bolduan, R.; Steinbrenner, J.; Oechsner, H.
Zeitschriftenaufsatz
Journal Article
2019 Setup of micro free-flow electrophoresis, our state of development: Peripherie setup and chip-modification
Müller, Dominik; Geiger, Sebastian; Rabenecker, Peter
Konferenzbeitrag
Conference Paper
2019 Simulation of Damage Characteristics
Fischer, C.; Mittag, S.; Kuhlen, Karl Gerhard; Schweizer, C; Seifert, T.; Dittrich, Robert; Kollmeier, Hans-Peter
Bericht
Report
2019 Simulieren, aber richtig! Das Problem der reversiblen Wasseraufnahme bei Waterborne-Beschichtungen
Becker, Wolfgang; Cäsar, Joachim; Knapp, Sebastian; Koleczko, Andreas; Schmid, Helmut
Konferenzbeitrag
Conference Paper
2019 Specific bending stiffness of in-mould-assembled hybrid sandwich structures with carbon fibre reinforced polymer face sheets and aluminium foam cores manufactured by a polyurethane-spraying process
Rupp, Peter; Elsner, Peter; Weidenmann, K.A.
Zeitschriftenaufsatz
Journal Article
2019 Structure and thermal behavior of TKX-50
Herrmann, Michael; Förter-Barth, Ulrich
Konferenzbeitrag
Conference Paper
2019 Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren
Manvi, Pavan Kumar; Möbitz, Christian; Buczko, Aleksandra; Schawaller, Dirk; Müller, Christoph
Bericht
Report
2019 Sulfides and Disulfides of s-Triazine and s-Heptazine: Flame Retardancy
Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin
Poster
2019 Supercritical water as reaction media
Jänisch, Thorsten
Vortrag
Presentation
2019 Supermet: Recovery of precious metals from spent catalysts by supercritical CO2 Extraction assisted by polymers
Jänisch, Thorsten; Ruiu, Andrea; Seaudeau-Pirouley, Karin; Senila, Marin; Bauer-Siebenlist, Bernhard; Lacroix-Desmazes, Patrick
Vortrag
Presentation
2019 Synthesis of Thiocyameluric Acid C6N7S3H3, its Reaction to Alkali Metal Thiocyamelurates and Organic Tris(dithio)cyamelurates
Posern, Christian; Höhne, Carl-Christoph; Böhme, Uwe; Vogt, Claudia; Kroke, Edwin
Zeitschriftenaufsatz
Journal Article
2019 The Connection Between the Parameters of WLF Equation and of Arrhenius Equation
Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2019 The way towards a CL-20/HMX Cocrystal scale-up
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas; Gerber, Peter; Klapötke, Thomas M.
Konferenzbeitrag
Conference Paper
2019 Thermal Characterization of Naturally Aged Propellants
Heil, Moritz; Hickmann, Jürgen; Müller, Christian
Zeitschriftenaufsatz
Journal Article
2019 Thermites - Versatile Materials
Koch, Ernst-Christian; Knapp, Sebastian
Zeitschriftenaufsatz
Journal Article
2019 Three-Dimensional fiber skeleton
Beck, Björn; Haas, Jonathan; Tawfik, Hussam
Zeitschriftenaufsatz
Journal Article
2019 Trace level detection of explosives by surface enhanced raman spectroscopy (SERS) for defence applications - best practice
Schweikert, Wenka; Schnürer, Frank; Mendl, Alexander; Müller, S.
Konferenzbeitrag
Conference Paper
2019 UD-Tape basierte Bauteile in kurzer Zykluszeit. Strahlungsinduzierte Vakuumkonsolidierung beschleunigt UD-Tape-Verarbeitung
Link, Tobias
Internetbeitrag
Internet Contribution
2019 Untersuchungen zum Leistungs- und Korrosionsverhalten eines HT-PEM-Brennstoffzellen-Stacks
Zick, Lars Moritz
Master Thesis
2019 UV/VIS Spektroskopie zur kontinuierlichen Bestimmung des Ladezustandes eines Vanadium Redox Flow Batterie
Winter, Christoph
Master Thesis
2019 Vanadium electrolyte for all-vanadium redox-flow batteries: The effect of the counter ion
Roznyatovskaya, Nataliya; Noack, Jens; Mild, Heiko; Fühl, Matthias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Skyllas-Kazacos, Maria
Zeitschriftenaufsatz
Journal Article
2019 Vanadium Oxygen Fuel Cell Utilising High Concentration Electrolyte
Risbud, Mandar; Menictas, Chris; Skyllas-Kazacos, Maria; Noack, Jens
Zeitschriftenaufsatz
Journal Article
2019 Verbrückte Phosphorverbindungen als Flammschutzmittel in Epoxidharzen
Weinert, Michael
Dissertation
Doctoral Thesis
2019 Verfahren zur Herstellung einer haftvermittelnden Beschichtung
Dreher, Ralf; Emmerich, Rudolf
Patent
2019 Verfahrensoptimierung der Herstellung von Nanocellulose-Trägermedium-Gemische zur Einarbeitung in Biopolymere
Heymann, Valeska
Bachelor Thesis
2019 Virtual process chain of sheet molding compound: Development, validation and perspectives
Görthofer, J.; Meyer, N.; Pallicity, T.D.; Schöttl, L.; Trauth, A.; Schemmann, M.; Hohberg, M.; Pinter, P.; Elsner, Peter; Henning, Frank; Hrymak, A.; Seelig, T.; Weidenmann, K.; Kärger, L.; Böhlke, T.
Zeitschriftenaufsatz
Journal Article
2019 Von der Carbonfaser zur Brennstoffzelle - Gewinnung von Sekundärgraphit aus rezyklierten Kohlenstofffasern
Seiler, Elisa; Hickmann, T.; Teipel, Ulrich
Konferenzbeitrag
Conference Paper
2019 Water Management in a High Current Density PEM Electrolysis Cell
Reum, Tobias
Master Thesis
2019 Weiterentwicklung einer Methodik zur rheologischen Untersuchung von schnellhärtenden Epoxidharzen
Dietrich, Philipp
Bachelor Thesis
2019 Werkstoffcharakterisierung zur Prozessentwicklung der Materialvorbehandlung für die Eignung im T-RTM Herstellverfahren
Herzog, Janek
Master Thesis
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2018

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2018 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2018 A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding
Poppe, Christian; Dörr, Dominik; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2018 A meta-model based approach for rapid formability estimation of continuous fibre reinforced components
Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L.
Konferenzbeitrag
Conference Paper
2018 A new algorithm to determine geometric properties of propellant grains from computer tomographic images
Wurster, Sebastian; Sprengel, David
Konferenzbeitrag
Conference Paper
2018 A novel differential electrochemical mass spectrometry method to determine the product distribution from parasitic Methanol oxidation reaction on oxygen reduction reaction catalysts
Jurzinsky, Tilman; Kurzhals, Philipp; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2018 A review of electrolyte additives and impurities in vanadium redox flow batteries
Cao, L.; Skyllas-Kazacos, M.; Menictas, C.; Noack, Jens
Zeitschriftenaufsatz
Journal Article
2018 Accelerated ageing and hydrolytic stabilization of poly(lactic acid) (PLA) under humidity and temperature conditioning
Porfyris, A.; Vasilakos, S.; Zotiadis, C.; Papaspyrides, C.; Moser, Kevin; Schueren, L. van der; Buyle, G.; Pavlidou, S.; Vouyiouka, S.
Zeitschriftenaufsatz
Journal Article
2018 Accurate description of the ageing of energetic materials
Heil, Moritz
Konferenzbeitrag
Conference Paper
2018 Aging of RDX Crystal Qualities Investigated by Means of X-ray Diffraction Rocking Curves
Herrmann, Michael; Bohn, Manfred A.; Borne, Lionel
Konferenzbeitrag
Conference Paper
2018 Airbag 2018, 14th International Symposium and Accompanying Exhibition on Sophisticated Car Occupant Safety Systems
Tagungsband
Conference Proceeding
2018 Almost inseparable. Strong adhesion in metal-polymer compounds due to nanoporous adhesive layer
Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf
Zeitschriftenaufsatz
Journal Article
2018 Analysis of gases emitted in safety events
Abert, Michael
Aufsatz in Buch
Book Article
2018 Ap-free composite propellants as reclament for AP/HTPB/AL
Tagliabue, Claudio; Fischer, Sebastian; Gettwert, Volker; Weiser, Volker
Konferenzbeitrag
Conference Paper
2018 Application and evaluation of meta-model assisted optimisation strategies for gripper assisted fabric draping in composite manufacturing
Zimmerling, Clemens; Pfrommer, Julius; Liu, Jinzhao; Beyerer, Jürgen; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2018 Beinahe unzertrennlich. Hohe Festigkeit durch nanoporöse Haftschicht für Metall-Kunststoff-Verbunde
Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf
Zeitschriftenaufsatz
Journal Article
2018 Beobachtung des Schädigungsverhaltens von Zylinderkopfproben bei TMF-Belastung
Cömertpay, Hatem
Master Thesis
2018 Binder crystal adhesion measured in macro HMX/HTPB-composites
Kronis-Rudigier, Gunnar; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2018 Burning behaviour of ADN solid propellants in comparison to other oxidizers
Imiolek, Andreas; Weiser, Volker; Locatelli, Francesco; Tagliabue, Claudio; Gettwert, Volker; Bieroth, Diana
Konferenzbeitrag
Conference Paper
2018 Burning behaviour of energetic ionic liquids investigated with-4-amino-1-methyl-1,2,4-triazolumnitrat
Weiser, Volker; Schaller, Uwe; Becker, Wolfgang; Bieroth, Diana; Hürttlen, Jürgen; Knapp, Sebastian; Lity, André; Roth, Evelin
Konferenzbeitrag
Conference Paper
2018 Camphor coated powders investigated by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz
Konferenzbeitrag
Conference Paper
2018 Characterisation of particle mixtures by nano computer tomography
Knapp, Sebastian; Koleczko, Andreas; Kröber, Hartmut
Konferenzbeitrag
Conference Paper
2018 Characterization of gun propellants containing bateg
Böhnlein-Mauß, Jutta; Mitró, Daniel; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2018 Characterization of polyester-based polyurethane elastomers plasticized with energetic ionic liquids
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.; Schaller, Uwe
Konferenzbeitrag
Conference Paper
2018 Charakterisierung der Einflussparameter für das Verarbeiten von PA6 Hybridrovings im Wickelverfahren für endlosglasfaserverstärkte Spritzgussbauteile
Becker, Jerome
Master Thesis
2018 Chemical Recycling of post-consumer Mattress Materials
Yogish, Savina Padumane
Master Thesis
2018 Comminution of energetic materials in viscous binder components with high solid loadings
Dresel, Alexander; Gerber, Peter; Roßmann, Christian; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2018 Copolymers based on GAP and 1,2‐Epoxyhexane as Promising Prepolymers for Energetic Binder Systems
Hafner, Sven; Keicher, Thomas; Klapötke, Thomas M.
Zeitschriftenaufsatz
Journal Article
2018 Corrossion behaviour of aluminide diffusion coatings on ferritic steel in molten Solar Salt
Weick, Sarah
Master Thesis
2018 D 6.8 PEDR Plan for the Exploitation and Dissemination of Results. Final Report
Lagioia, Rocco
Bericht
Report
2018 D 7.2 Second Progress Report Part A
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco
Bericht
Report
2018 D 7.3 Third Progress Report
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Müller, Torsten; Val, Diego; García, Jose Manuel; Lagioia, Rocco
Bericht
Report
2018 Decolorization of plastics by extraction of pigments with supercritical CO2
Jänisch, Thorsten; Unser, Steffen
Poster
2018 Demonstration of a Nonlinear Model Predictive Control of a Thermal Management System for Electric Vehicles in Real-Time
Fischer, Torben; Kraus, Tom; Kirches, Christian; Gauterin, Frank
Konferenzbeitrag
Conference Paper
2018 DEMS and online mass spectrometry studies of the carbon support corrosion under various polymer electrolyte membrane fuel cell operating conditions
Cremers, Carsten; Jurzinsky, Tilman; Meier, Jan; Schade, A.; Branghofer, Marco; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2018 Development of electrolytes for lithium-sulfur batteries with focus on electrochemical and electrolyte decomposition analyses
Nave, Eran
Master Thesis
2018 Development of full carbon wheels for sport cars with high-volume technology
Rondina, Francesco; Taddia, Sara; Mazzocchetti, Laura; Donati, Lorenzo; Minak, Giangiacomo; Rosenberg, Philipp; Bedeschi, Andrea; Dolcini, Enrico
Zeitschriftenaufsatz
Journal Article
2018 DMA of polyester-based polyurethane elastomers for composite rocket propellants containing different energetic plasticizers
Lemos, M.F.; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2018 Effect of HMX distribution and plasticizer content variations on the DMA loss factor of HTPB-IPDI binder
Bohn, Manfred A.; Gerber, Peter; Heintz, Thomas; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2018 Einleuchtende Idee. Fraunhofer ICT verarbeitet leitfähiges Material in der additiven Fertigung
Hübner, Christof
Zeitschriftenaufsatz
Journal Article
2018 Electrolyte decomposition and electrode thickness changes in Li-S cells with lithium metal anodes, prelithiated silicon anodes and hard carbon anodes
Hancock, K.; Becherer, J.; Hagen, M.; Joos, M.; Abert, M.; Müller, D.; Franz, P.; Straach, S.; Tübke, J.
Zeitschriftenaufsatz
Journal Article
2018 Energetic Materials. Synthesis, Processing, Performance
Tagungsband
Conference Proceeding
2018 Entwicklung einer neuartigen Verarbeitungstechnologie zur universellen Umformung von endlosfaserverstärkten thermoplastischen Hohlprofilen
Liyang, Hong
Master Thesis
2018 Entwicklung eines additiv gefertigten Kurbelgehäuses für einen Einzylinder Rennmotor
Hirzler, Ingo
Master Thesis
2018 Entwicklung eines Reglers für die Austrittstemperatur von Wirbelrohren
Brantin, Alexej
Bachelor Thesis
2018 Entwicklung und Evaluation von alkoholtoleranten Pt-basierten Kathodenkatalysatoren für Direktalkohol-Brennstoffzellen-Anwendungen
Cremers, Carsten
Bericht
Report
2018 Evaluation of an Integral Injection Molded Housing for High Power Density Synchronous Machines with Concentrated Single-Tooth Winding
Langheck, Andreas; Reuter, Steffen; Saburow, Oleg; Märtens, Robert; Wittemann, Florian; Berg, Lars Frederik; Doppelbauer, Martin
Konferenzbeitrag
Conference Paper
2018 Experimental and numerical investigation of the shear behaviour of infiltrated woven fabrics
Poppe, Christian; Dörr, Dominik; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2018 Experimental calibration of manganin pressure gauges
Wurster, Sebastian; Schrabback, M.; Leibold, Marvin
Konferenzbeitrag
Conference Paper
2018 Fertigung ionisch leitender Membranen für den Einsatz in Festkörperbatterien
Theil, Patrik André
Master Thesis
2018 Foam injection molding of glass fiber reinforced polypropylene composites with laminate skins
Kasemphaibulsuk, Pibulchai; Holzner, Marcel; Kuboki, Takashi; Hrymak, Andrew
Zeitschriftenaufsatz
Journal Article
2018 Following isocyanate-polyol curing by volume shrinkage induced pressure decrease - considering reaction volume, activation volume, compressibility and diffusion control
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2018 Formation of ADN-prills in microfluidic droplet generators
Radulescu, Ligia; Eberhardt, Angelika; Boskovic, D.
Konferenzbeitrag
Conference Paper
2018 Fraunhofer Institute for Chemical Technology. Annual Report 2017/2018
Jahresbericht
Annual Report
2018 Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2017/2018
Jahresbericht
Annual Report
2018 Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
Bericht
Report
2018 Gasanalytik, Schichtdickenmessungen und Stabilitätsuntersuchungen an kostengünstigen Elektroden für stationäre Energiespeicher
Petit, Jan
Master Thesis
2018 High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants
Audigié, P.; Encinas-Sánchez, V.; Juez-Lorenzo, Maria del Mar; Rodríguez, S.; Gutiérrez, M.; Pérez, F.J.; Agüero, A.
Zeitschriftenaufsatz
Journal Article
2018 Hybrid materials - Joining of polymers and metals
Spancken, Dominik; Laveuve, Dominik M.; Beck, J.; Stötzner, Norbert; Straeten, Kira van der; Büter, Andreas; Henning, Frank
Konferenzbeitrag
Conference Paper
2018 Hybrid thermoplastic composites for automotive applications - Development and manufacture of a lightweight rear floor structure in multi-material design
Link, Tobias; Baumgärtner, Sascha; Dörr, Dominik; Hohberg, Martin; Henning, Frank
Konferenzbeitrag
Conference Paper
2018 Illuminating Idea. Fraunhofer ICT processes conductive material in additive manufacturing
Hübner, Christof
Zeitschriftenaufsatz
Journal Article
2018 Impact of carbon support functionalization on the electrochemical stability of Pt fuel cell catalysts
Schmies, Henrike; Hornberger, Elisabeth; Anke, Björn; Jurzinsky, Tilman; Nong, Hong Nhan; Dionigi, Fabio; Kühl, Stefanie; Drnec, Jakub; Lerch, Martin; Cremers, Carsten; Strasser, P.
Zeitschriftenaufsatz
Journal Article
2018 Inbetriebnahme eines Prüfstands zur Bestimmung des Einflusses von kombinierter TMF/HCF-Belastung auf die Lebensdauer von Aluminiumkolben
Koleczko, Rubens
Bachelor Thesis
2018 Influence of ADN/Nitramine Mixtures on the Burning Behaviour of Composite Propellants with Inert and Energetic Binders
Locatelli, Francesco
Master Thesis
2018 Influence of HFO refrigerants on the viscoelastic behavior of elastomers
Eyerer, S.; Eyerer, Peter; Wieland, C.; Spliethoff, H.
Konferenzbeitrag
Conference Paper
2018 Integration of electronic components in the thermoplastic processing chain: Possibilities through additive manufacturing using conductive materials
Morais, Manuel V.C.; Reidel, Robin; Weiss, Patrick; Baumann, Sascha; Hübner, Christof; Henning, Frank
Konferenzbeitrag
Conference Paper
2018 Internal plasticized glycidyl azide polyethers for solid propellant binders
Hafner, Sven; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2018 Intrinsic flame resistance of polyurethane flexible foams: Unexpectedly low flammability without any flame retardant
Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin
Zeitschriftenaufsatz
Journal Article
2018 Inverse Gaschromatographie Untersuchungen für Alkane, Alkohole, Aromaten und Nitroverbindungen zur Charakterisierung eines selektiven Multiadsorbers
Schuster, Martina
Master Thesis
2018 Klär- und Abwasseraufbereitung: Membrantechnologien und Hydrothermale Carbonisierung (HTC) inkl. Prozesswasseraufbereitung
Jänisch, Thorsten
Vortrag
Presentation
2018 Life cycle assessment: A tool to eco-design structural composite parts
Reichert, Thomas; Salles, Ana
Konferenzbeitrag
Conference Paper
2018 Life cycle gaps: Interpreting LCA results with a circular economy mindset
Dieterle, Michael; Schäfer, Philipp; Viere, Tobias
Zeitschriftenaufsatz
Journal Article
2018 Locally continuous-fiber reinforced sheet molding compound
Bücheler, David
Dissertation
Doctoral Thesis
2018 Long-term behaviour of Nb and Cr nitrides nanostructured coatings under steam at 650 °C
Agüero, Alina; Juez-Lorenzo, Maria del Mar; Hovsepian, Papken; Ehiasarian, Arutiun Papken; Purandare, Yashodhan; Muelas, Raúl
Zeitschriftenaufsatz
Journal Article
2018 Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten
Gatti, F.; Amann, T.; Kailer, A.; Rabenecker, P.; Baltes, N.; Rühe, J.
Konferenzbeitrag
Conference Paper
2018 Mass flow determination of airbag inflators
Yurrita, Pedro; Klahn, Thorsten; Neutz, Jochen; Edelmann, Nico
Konferenzbeitrag
Conference Paper
2018 Material- und Verfahrensentwicklung zur industriellen Umsetzung großflächiger endlosfaserverstärkter Bauteile aus aPA6 - am Beispiel von 2D-Flechtbauteilen
Pfister, Sandra Kathrin
Dissertation
Doctoral Thesis
2018 MD simulation of HMX rupture under tensile stress
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2018 Mechanical Properties of Additively Manufactured Polymer Samples using a Piezo Controlled Injection Molding Unit and Fused Filament Fabrication compared with a Conventional Injection Molding Process
Pinter, Pascal; Baumann, Stefan; Lohr, Christoph; Heuer, Anselm; Englert, Lars; Weidenmann, Kay A.
Konferenzbeitrag
Conference Paper
2018 Messtechnische Erfassung und Auswertung eines thermischen Solarkollektorfeldes
Glastetter, Anton
Bachelor Thesis
2018 Methanol oxidation reaction on core-shell structured Ruthenium-Palladium nanoparticles: Relationship between structure and electrochemical behavior
Kübler, Markus; Jurzinsky, Tilman; Ziegenbalg, Dirk; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2018 Microstructure and Thermal Behavior of ADN-Prills investigated by means of X-ray Diffraction. Pt.II
Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Bernd; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2018 Modellierung und Simulation eines Pufferbehälters mit Luftumwälzung zur Durchmischung einer Sprengstoff-Wasser Suspension mit OpenFOAM
Schmähl, Florian
Master Thesis
2018 Modellierung, Simulation und Charakterisierung des Abbrandes extrudierbarer Festtreibstoffe mit komplexer Querschnittgeometrie
Wurster, Sebastian
Dissertation
Doctoral Thesis
2018 Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes
Dörr, Dominik; Faisst, Markus; Joppich, Tobias; Poppe, Christian; Henning, Frank; Kärger, Luise
Konferenzbeitrag
Conference Paper
2018 Moisture sorption of ɛ-caprolactam and its influence on the anionic polymerization in the thermoplastic RTM-process - An overview
Wilhelm, Michael; Wendel, Rainer
Konferenzbeitrag
Conference Paper
2018 Molecular dynamics simulation of tensile tests at a curved binder-particle interface
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2018 Molecularly imprinted polymers for detection of explosives In gas phase approach for the detection of TNT in cargo containers
Heil, Moritz
Konferenzbeitrag
Conference Paper
2018 Multi-objective patch optimization with integrated kinematic draping simulation for continuous-discontinuous fiber-reinforced composite structures
Fengler, Benedikt; Kärger, Luise; Henning, Frank; Hrymak, Andrew
Zeitschriftenaufsatz
Journal Article
2018 Multifunktionelle medizinische Sonde
Eckl, Wilhelm; Schmid, Helmut; Scholz, Peter
Patent
2018 Nanomaterialien für elektrische Energiespeicher
Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike
Aufsatz in Buch
Book Article
2018 New battery technologies for electric vehicles - What will we see on the road?
Tübke, Jens
Konferenzbeitrag
Conference Paper
2018 Nir-flare compositions basing on hot water band emission
Roth, Evelin; Weiser, Volker; Lity, Andre; Raab, Angelika; Kelzenberg, Stefan
Konferenzbeitrag
Conference Paper
2018 Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics
Dörr, Dominik; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2018 Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide
Weinert, Michael; Fuhr, Olaf; Döring, Manfred
Zeitschriftenaufsatz
Journal Article
2018 Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
Muth, Markus; Schwennen, Jan; Bernath, Alexander; Seuffert, Julian; Weidenmann, Kay Andre; Fleischer, Jürgen; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2018 Numerische Modellierung einer selbsterhaltenden Hochtemperatursynthese von nano-strukturierten Bor-Partikeln
Heger, Patrick
Master Thesis
2018 On the scale-up of metal-organic frameworks using microreaction technology
Polyzoidis, Angelos
Dissertation
Doctoral Thesis
2018 Optical properties of filled polymeric composite materials from near infrared spectroscopy
Becker, Wolfgang; Sachsenheimer, K.; Roth, Evelin; Knapp, Sebastian; Weiser, Volker
Konferenzbeitrag
Conference Paper
2018 Optimierte Emulsions- und Partikelerzeugung in mikrofluidischen Strukturen
Winter, Yannik
Master Thesis
2018 Optimization of the biogas process by delignification of the feed and separation of volatile fatty acids during the process
Jänisch, Thorsten
Vortrag
Presentation
2018 Oxidation of manganese and decomposition of MnO2
Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike
Konferenzbeitrag
Conference Paper
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2018 Partikeltechnologie
Teipel, Ulrich; Türk, Michael
Zeitschriftenaufsatz
Journal Article
2018 Polymerbasierte Nanokomposite
Diemert, Jan; Hübner, Christof; Hartwig, Andreas; Laschewsky, Andre
Aufsatz in Buch
Book Article
2018 Preconcentration of Nitroalkanes with Archetype Metal-Organic Frameworks (MOFs) as Concept for a Sensitive Sensing of Explosives in the Gas Phase
Rieger, M.; Wittek, Michael; Scherer, P.; Löbbecke, Stefan; Müller-Buschbaum, K.
Zeitschriftenaufsatz
Journal Article
2018 Principles of ageing of double base propellants and its assessment by several methods following propellant properties
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2018 Printed explosives standards for the evaluation of stand-off optical systems
Schnürer, F.; Ulrich, C.; Müller, S.; Schweikert, W.
Konferenzbeitrag
Conference Paper
2018 Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology
Lohr, C.; Beck, Björn; Henning, Frank; Weidenmann, K.A.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2018 Product design of ADN-PRILLS for applications in solid propellants
Heintz, Thomas; Leisinger, Karlfred; Reinhardt, Werner; Heil, Moritz; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2018 Prozessentwicklung für den Einsatz neuer Prototyping Technologien in der Entwicklung
Kübler, Maximilian Stephan
Bachelor Thesis
2018 Prozesstechnik zur Altholzaufbereitung
Eisenlauer, M.; Graf, H.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2018 Rare earths and the balance problem: How to deal with changing markets?
Binnemans, Koen; Jones, Peter Tom; Müller, Torsten; Yurramendi, Lourdes
Zeitschriftenaufsatz
Journal Article
2018 Reaction between azide molecule with hydroxyl terminated polybutadiene
Ferrapontoff Lemos, Mauricio; Dörich, Manuela; Keicher, Thomas; Bohn, Manfred A.; Mendes, C.
Konferenzbeitrag
Conference Paper
2018 Recycled polyethylene terephthalate/carbon nanotube composites with improved processability and performance
Chowreddy, Ravindra Reddy; Nord-Varhaug, Katrin; Rapp, Florian
Zeitschriftenaufsatz
Journal Article
2018 Redox-Flow-Zelle und Verfahren zu deren Herstellung
Noack, Jens; Pinkwart, Karsten; Rumpel, Georg; Tübke, Jens
Patent
2018 Reducing load in air transportation
Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo
Zeitschriftenaufsatz
Journal Article
2018 Reproducible generation of explosive traces for detection system testing
Wittek, M.; Röseling, D.; Schnürer, F.; Heintz, T.; Dresel, A.; Wegener, T.; Schmäh, M.
Konferenzbeitrag
Conference Paper
2018 Rheological studies on gas-laden and long glass fiber reinforced polypropylene through an inline high pressure capillary rheometer in the injection molding process
Lohr, C.; Dieterle, S.; Menrath, Andreas; Weidenmann, K.A.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2018 Risikoanalyse und Entwicklung eines Sicherheitskonzeptes für eine Hochdruckversuchsanlage zur Abbrandcharakterisierung von Raketenfesttreibstoffen
Wachter, Laura
Master Thesis
2018 RoBEMM - Robotische Unterwasser-Bergungs und Entsorgungsverfahren inklusive Technik zur Delaboration von Munition im Meer, insbesondere Im Küsten- und Flachwasserbereich
Abbondanzieri, M.; Klein, T.; Frey, T.; Müller, P.
Konferenzbeitrag
Conference Paper
2018 Sensitivity reduction of the CL-20/HMX cocrystal via advanced crystallization process
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2018 Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR
Jänisch, Thorsten
Vortrag
Presentation
2018 Simulating Mold Filling in Compression Resin Transfer Molding (CRTM) Using a Three-Dimensional Finite-Volume Formulation
Seuffert, Julian; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2018 Simulation of reinforced reactive injection molding with the finite volume method
Wittemann, Florian; Maertens, Robert; Bernarth, Alexander; Hohberg, Martin; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2018 Small object low-velocity impact damage on hybrid sandwich structures with CFRP face sheets and aluminum foam cores
Rupp, P.; Elsner, Peter; Weidenmann, K.A.
Zeitschriftenaufsatz
Journal Article
2018 Steam oxidation of aluminide coatings under high pressure and for long exposures
Boulesteix, C.; Kolarik, Vladislav; Pedraza, F.
Zeitschriftenaufsatz
Journal Article
2018 Studie zur oxidativen Konversion von Lignin zu polyfunktionellen Oligomeren und konstruktive Technikfolgenabschätzung eines entsprechenden Prozessmoduls
Reinhardt, Sebastian
Master Thesis
2018 Sulfides and Disulfides of S-Triazine and S-Heptazine: Flame Retardancy
Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin
Poster
2018 Sulfides and disulfides of s-Triazine: Potential thermal thiyl radical generators
Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin
Zeitschriftenaufsatz
Journal Article
2018 Synthesis of metal-organic frameworks for energetic applications
Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Schwarzer, M.; Boskovic, D.; Löbbecke, Stefan
Konferenzbeitrag
Conference Paper
2018 Tensile test of HMX/HTPB macro-composites
Herrmann, Michael; Kronis-Rudigier, Gunnar
Konferenzbeitrag
Conference Paper
2018 Testtailoring
Cäsar, Joachim
Konferenzbeitrag
Conference Paper
2018 The connection between WLF equation and Arrhenius equation
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2018 The Effect of Nonlinearity on Determined Parameters of Gun Propellant Burn Rate Models
Wurster, Sebastian
Zeitschriftenaufsatz
Journal Article
2018 The influence of electrochemical treatment on electrode reactions for vanadium redox-flow batteries
Noack, Jens; Roznyatovskaya, Nataliya; Kunzendorf, J.; Skyllas-Kazacos, M.; Menictas, C.; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2018 Theoretical analysis and experimental investigation of material compatibility between refrigerants and polymers
Eyerer, S.; Eyerer, Peter; Eicheldinger, M.; Tübke, Beatrice; Wieland, C.; Spliethoff, H.
Zeitschriftenaufsatz
Journal Article
2018 Thermal characterization of naturally aged gun and rocket propellants
Heil, Moritz; Hickmann, J.
Konferenzbeitrag
Conference Paper
2018 Titania supported on silica as an efficient catalyst for deep oxidative desulfurization of a model fuel with exceptionally diluted H2O2
Piscopo, Calogero; Tochtermann, J.; Schwarzer, Maud; Boskovic, Dusan; Maggi, R.; Maestri, G.; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2018 Untersuchung der Eignung von thermoplastischem Cellulosepropionat zur Aufschäumung im kontinuierlichen Schaumextrusionsprozess
Rapp, Florian
Dissertation
Doctoral Thesis
2018 Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern
Hartweg, Matthias
Dissertation
Doctoral Thesis
2018 Untersuchung und Optimierung einer Eisen-basierten Redox-Flow-Batterie
Wernado, Mike
Bachelor Thesis
2018 Untersuchung von Elektrokatalysatoren für die Sauerstoffreduktionsreaktion in Brennstoffzellen bei tiefen Temperaturen
Kunkel, Robin
Master Thesis
2018 Untersuchungen zum Einfluss von Wasser auf die aktivierte anionische Polymerisation von ɛ-Caprolactam im thermoplastischen RTM Prozess
Wilhelm, Michael
Master Thesis
2018 Use of supercritical CO2 (scCO2) as extraction agent and reaction solvent
Jänisch, Thorsten
Vortrag
Presentation
2018 Verfahren und Vorrichtung zur Herstellung von mit einer Tragstruktur versehenen Polymer-Formteilen
Baumgärtner, Sebastian; Huber, Timo
Patent
2018 Weniger Last beim Lufttransport
Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo
Zeitschriftenaufsatz
Journal Article
2018 Wirksame Methoden zur UV-Stabilisierung von Polymer-Oberflächen im Außenbereich
Schmid, Helmut; Becker, Wolfgang; Knapp, Sebastian; Koleczko, Andreas
Konferenzbeitrag
Conference Paper
2018 WITHDRAWN: "Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics" [Composites Part A: Applied Science and Manufacturing 109 (2018) 585-596]
Dörr, D.; Henning, Frank; Kärger, L.
Zeitschriftenaufsatz
Journal Article
2018 Ölverbrauchsmessung an einem Abgasturbolader mit einem Flammenionisationsdetektor am Heißgasprüfstand
Dietrich, Simon
Bachelor Thesis
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2017

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2017 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2017 8th European Weathering Symposium, EWS 2017
Tagungsband
Conference Proceeding
2017 A benchmark study of finite element codes for forming simulation of thermoplastic UD-tapes
Dörr, Domenik; Brymerski, Wojciech; Ropers, S.; Leutz, Daniel; Joppich, Tobias; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2017 A comb-like ionomer based on poly(2,6-dimethyl-1,4-phenylene oxide) for the use as anodic binder in anion-exchange membrane direct methanol fuel cells
Jurzinsky, Tilman; Bär, Robin; Heppe, Nils; Cremers, Carsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2017 A dendritic amphiphile for efficient control of biomimetic calcium phosphate mineralization
Hentrich, Doreen; Tabaache, Soraya; Brezesinski, Gerald; Lange, Nele; Unger, Wolfgang; Kübel, Christian; Bertin, Annabelle; Taubert, Andreas
Zeitschriftenaufsatz
Journal Article
2017 A direct process to reuse dry fiber production waste for recycled carbon fiber bulk molding compounds
Saburow, Oleg; Huether, Jonas; Maertens, Robert; Trauth, Michael; Kechaou, Yasmine; Henning, Frank; Weidenmann, Kay André
Zeitschriftenaufsatz
Journal Article
2017 A holistic approach to use multi-scale fractions of dry carbon fibre production waste in filled bulk moulding compounds (BMC)
Huether, Jonas; Maertens, Robert; Saburow, Oleg; Seiler, Elisa; Aicher, Theresa; Weidenmann, Kay
Konferenzbeitrag
Conference Paper
2017 A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics (UD-NCF)
Schirmaier, Fabian Johannes; Dörr, Dominik; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2017 A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites
Dörr, Dominik; Schirmaier, Fabian Johannes; Henning, Frank; Kärger, Luise
Zeitschriftenaufsatz
Journal Article
2017 ADN-Prills: Particle properties, stability and sensitivity
Heintz, Thomas; Reinhard, Werner; Leisinger, Karlfred; Herrmann, Michael; Heil, Moritz
Konferenzbeitrag
Conference Paper
2017 Advanced molds and methods for the fundamental analysis of process induced interface bonding properties of hybrid, thermoplastic composites
Joppich, Tobias; Menrath, Andreas; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2017 Ageing of surface coated powders investigated by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz
Konferenzbeitrag
Conference Paper
2017 Aging behavior of ADN solid rocket propellants and their glass-rubber transition characteristics
Bohn, Manfred; Cerri, S.
Aufsatz in Buch
Book Article
2017 Aging of standard and insensitive RDX crystals investigated by means of X-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred; Borne, Lionel
Zeitschriftenaufsatz
Journal Article
2017 Ammonium dinitramide/glycidyl azide polymer (ADN/GAP) composite propellants with and without metallic fuels
Gettwert, Volker; Franzin, A.; Bohn, Manfred; DeLuca, L.T.; Weiser, Volker
Zeitschriftenaufsatz
Journal Article
2017 Anion intercalation into a graphite cathode from various sodium-based electrolyte mixtures for dual-ion battery applications
Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael
Zeitschriftenaufsatz
Journal Article
2017 Application of eco-efficiency analysis to assess three different recycling technologies for carbon fiber reinforced plastics (CFRPs)
Dieterle, Michael; Seiler, Elisa; Viere, Tobias
Konferenzbeitrag
Conference Paper
2017 Arylthio- and Arylseleno-Substituted s-Heptazines
Posern, Christian; Böhme, Uwe; Wagler, Jörg; Höhne, Carl-Christoph; Kroke, Edwin
Zeitschriftenaufsatz
Journal Article
2017 Aufbau eines multidimensionalen Prozess-GC-MS
Ziogas, Athanassios; Lenz, Manfred; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2017 Aus einem anderen Blickwinkel
Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin
Zeitschriftenaufsatz
Journal Article
2017 Aus einem anderen Blickwinkel: ORW-Verfahren ermöglicht multiaxiale lokale Verstärkung für RTM-Strukturbauteile
Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin
Zeitschriftenaufsatz
Journal Article
2017 Automatisierung eines Prüfstands zur Validierung von Dichtsystemen für Redox-Flow-Batterien
Ekinci, Ismet
Bachelor Thesis
2017 Beitrag zur Konsolidierung von thermoplastischen Hochleistungsfaserverbundwerkstoffen
Baumgärtner, Sebastian
Dissertation
Doctoral Thesis
2017 Blue light mediated C-H arylation of heteroarenes using TiO2 as an immobilized photocatalyst in a continuous-flow microreactor
Fabry, David; Ho, Yee Ann; Zapf, Ralf; Tremel, Wolfgang; Panthöfer, Martin; Rueping, Magnus; Rehm, Thomas H.
Zeitschriftenaufsatz
Journal Article
2017 Burning Behavior of ADN-Based Propellants Loaded with Al-Mg Mechanically Activated Powders
Cristilli, Francesco
Master Thesis
2017 Catalytic oxidation of HTC-waste water in super critical H2O
Jänisch, Thorsten; Graf, Jürgen; Tübke, Beatrice; Pohsner, Ute; Böringer, Sarah
Poster
2017 Catalytic oxidation of HTC-waste water in supercritical H2O
Jänisch, Thorsten
Konferenzbeitrag
Conference Paper
2017 Chancen und Grenzen der Small-Scale-Chemie. Abschied vom hohen Schornstein
Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2017 Chapter 2: Bio-Fiber Thermoset Composites
Rajpurohit, A.; Henning, Frank
Aufsatz in Buch
Book Article
2017 Characterization of aging behavior of butacene® based composite propellants by loss factor curves
Seyidoglu, Tijen; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2017 Characterization of gun propellants by long-term mass loss measurements
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2017 Characterization of nanoparticles in biological environments
Maskos, Michael; Stauber, Roland H.
Aufsatz in Buch
Book Article
2017 Characterization of the interlaminar shear strength of fibre metal laminates with reactively processed thermoplastic matrix
Werner, H.; Sönmez, I.; Wendel, Rainer; Weidenmann, K.; Henning, Frank
Konferenzbeitrag
Conference Paper
2017 Chemoselective three-phase hydrogenation of an Ombrabulin nitro-stilbene intermediate in a continuous-flow mobile platform
Rehm, Thomas H.; Reinhard, Dorothee; Kost, Hans-Joachim; Hofmann, Christian; Zapf, Ralf; Löb, Patrick; Laribi, Yosra; Perrichon, Philippe D.; Berguerand, Charline; Kiwi-Minsker, Lioubov; Sulman, Esther; Szirbik, Gabor; Richert, Hannes; Lang, Jürgen; Gottfried, Michael; Roggan, Stefan
Zeitschriftenaufsatz
Journal Article
2017 Combustion Behavior of a Metallized ADN/GAP Propellant as a Function of the Aluminum Content and the Binder/Oxidizer Ratio
Imiolek, Andreas; Weiser, Volker; Tagliabue, C.; Gettwert, Volker
Konferenzbeitrag
Conference Paper
2017 Combustion behavior of aluminum particles in ADN/GAP composite propellants
Weiser, Volker; Franzin, Andrea; DeLuca, Luigi; Fischer, Sebastian; Gettwert, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Raab, Angelika; Roth, Evelin; Eisenreich, Norbert
Aufsatz in Buch
Book Article
2017 Comminution of biogenic materials
Eisenlauer, Moritz; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2017 Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound
Lautenschläger, Miriam
Konferenzbeitrag
Conference Paper
2017 Comparison of kinetics, oxide crystal growth and diffusivities of nano- and micrometer-sized copper particles on oxidation in air
Eisenreich, Norbert; Schulz, Olga; Koleczko, Andreas; Knapp, Sebastian
Zeitschriftenaufsatz
Journal Article
2017 Comparison of methods for generating the CL-20/HMX-cocrystal
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2017 Compositional graphitic cathode investigation and structural characterization tests for Na-based dual-ion battery applications using ethylene carbonate:ethyl methyl carbonate-based electrolyte
Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael
Zeitschriftenaufsatz
Journal Article
2017 Continuous synthesis of single core iron oxide nanoparticles for MPI tracer development
Baki, Abdulkader; Löwa, Norbert; Thiermann, Raphael; Bantz, Christoph; Maskos, Michael; Wiekhorst, Frank; Bleul, Regina
Zeitschriftenaufsatz
Journal Article
2017 Continuous synthesis of UiO-66 in microreactor: Pursuing the optimum between intensified production and structural properties
Polyzoidis, Angelos; Schwarzer, Maud; Löbbecke, Stefan; Piscopo, Calogero
Zeitschriftenaufsatz
Journal Article
2017 Continuous-flow synthesis of fluorine-containing fine chemicals with integrated benchtop NMR analysis
Rehm, Thomas H.; Hofmann, Christian; Reinhard, Dorothee; Kost, Hans-Joachim; Löb, Patrick; Besold, Matthias; Welzel, Knut; Barten, Jan; Didenko, Andrey; Sevenard, Dmitri V.; Lix, Bruce; Hillson, Andrew R.; Riegel, Susanne D.
Zeitschriftenaufsatz
Journal Article
2017 Correlation of high explosive properties with plate dent test results for different geometries
Schrabback, M.; Materna, Miriam
Konferenzbeitrag
Conference Paper
2017 Corrosion of carbon supports, induced by high-temperature PEMFC operating conditions
Rau, María; Jung, Florina; Cremers, Carsten; Tübke, Jens
Konferenzbeitrag
Conference Paper
2017 D 5.1 LCA for REE and Mg Recovery Technologies
Salles, Ana
Bericht
Report
2017 D 5.2 Magnesium Recycling LCA
González, Manuel
Bericht
Report
2017 D 6.6 PEDR Plan for the Exploitation and Dissemination of Results Mid Project Report
Lagioia, Rocco
Bericht
Report
2017 D1.1 Definition of the starting situation in URBANREC regions
Bericht
Report
2017 D2.3. Mg recycling test unit
Val, Diego
Bericht
Report
2017 Darstellung der Eigenschaften von technisch genutztem Balsaholz und daraus resultierende Verwertungsrouten für End-of-Life-Material von Rotorblättern aus Windkraftanlagen.
Sprengel, Lukas
Bericht
Report
2017 Design of cross-linked starch nanocapsules for enzyme-triggered release of hydrophilic compounds
Steinmacher, Fernanda R.; Baier, Grit; Musyanovych, Anna; Landfester, Katharina; Araújo, Pedro H.H.; Sayer, Claudia
Zeitschriftenaufsatz
Journal Article
2017 Detection of Black Plastics in the Middle Infrared Spectrum (MIR) Using Photon Up-Conversion Technique for Polymer Recycling Purposes
Becker, Wolfgang; Sachsenheimer, Kerstin; Klemenz, Melanie
Zeitschriftenaufsatz
Journal Article
2017 Development and optimization of the alloying process
Rodriguez, Alicia
Bericht
Report
2017 Different polymorphic states of Explosives - A problem of trace detection for inkjet-printed samples
Schweikert, Wenka; Ulrich, Christian; Müller, Stefan; Schnürer, Frank
Konferenzbeitrag
Conference Paper
2017 Durchflusskammern für die Synthese biokonjugierter Legierungs-Nanopartikel. Teilprojekt
Löb, Patrick; Illg, Tobias; Kost, Hans-Joachim
Bericht
Report
2017 Dynamic model for investigation of instabilities in microchannel evaporators
Leube, Felix; Drese, Klaus Stefan; Stephan, Peter
Konferenzbeitrag
Conference Paper
2017 Effect of ceria and zirconia promoters on Ni/SBA-15 catalysts for coking and sintering resistant steam reforming of propylene glycol in microreactors
Shanmugam, Vetrivel; Zapf, Ralf; Neuberg, Stefan; Hessel, Volker; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2017 Effect of mechanical treatment on properties of zeolites with chabazite structure
Buzimov, A.Y.; Kulkov, S.N.; Eckl, Wilhelm; Pappert, Sandra; Gömze, L.A.; Kurovics, E.; Kocserha, I.; Geber, R.
Konferenzbeitrag
Conference Paper
2017 Efficient extraction of oil from droplet microfluidic emulsions
Haliburton, J.R; Kim, S.C.; Clark, I.C.; Sperling, Ralph A.; Weitz, David A.; Abate, A.R.
Zeitschriftenaufsatz
Journal Article
2017 Eigenschaftsänderungen von Prüfstäuben durch mechanische Beanspruchung
Teipel, Ulrich; Henning, Frank; Cäsar, Markus
Konferenzbeitrag
Conference Paper
2017 Electrochemical genetic profiling of single cancer cells
Sanchez, Josep L.A.; Joda, Hamdi; Henry, O.Y.F.; Solnestam, Beata W.; Kvastad, L.; Akan, Pelin S.; Lundeberg, J.; Laddach, Nadja; Ramakrishnan, Dheeraj; Riley, I.; Schwind, Carmen; Latta, Daniel; O'Sullivan, Ciara K.
Zeitschriftenaufsatz
Journal Article
2017 Electronic Supplementary Information (ESI) for "Continuous-flow synthesis of fluorine-containing fine chemicals with integrated benchtop NMR analysis"
Rehm, T.H.; Hofmann, C.; Reinhard, D.; Kost, H.-J.; Löb, P.; Besol, M.; Welzel, K.; Barten, J.; Didenko, A.; Sevenard, D.V.; Lix, B.; Hillson, A.R.; Riegel, S.D.
Zeitschriftenaufsatz
Journal Article
2017 Energy-efficient routes for the production of gasoline from biogas and pyrolysis oil-process design and life-cycle assessment
Sundaram, Smitha; Kolb, Gunther; Hessel, Volker; Wang, Q.
Zeitschriftenaufsatz
Journal Article
2017 Enhanced [4+2] cycloadditions by solvophobic effects and gravity-induced mixing in core-shell droplets
Karl, Dominik; Löwe, Holger
Zeitschriftenaufsatz
Journal Article
2017 Entwicklung einer Methodik zur quantitativen Analyse von mit dem AKF-Verfahren erzeugten Polymertropfen und Anwendung in Parameterstudie
Unger, Nicolas
Master Thesis
2017 Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität
Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens
Studie
Study
2017 Evaluation of ballistic modifier for aluminized ADN/PSAN propellants
Tagliabue, C.; Imiolek, A.; Gettwert, V.; Weiser, V.
Konferenzbeitrag
Conference Paper
2017 Evaluation of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder
Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2017 Evaluation of filler effects on the dynamic mechanical behavior of HTPB-elastomer used as binder in exemplary composite formulations
Lemos, Mauricio Ferrapontoff; Mußbach, Günter; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2017 Evaluation of the James Initiation Criterion in the 21mm and 50mm PMMA Gap Test
Wurster, Sebastian
Zeitschriftenaufsatz
Journal Article
2017 Experimentelle Charakterisierung von Designvarianten überlappend gefügter Kohlenstofffaserverbundstrukturen im Kontext der Entwicklung neuartiger Drapiertechnologien
Fürst, Tobias
Dissertation
Doctoral Thesis
2017 Flexible und dichte keramische Verbundseparatoren für Na-S-Mitteltemperaturzellen
Ahlbrecht, Katharina
Dissertation
Doctoral Thesis
2017 Following the curing of isocyanate-polyol by pressure decrease - influences of activation volume, reaction volume and change in bulk compressibility as well as diffusion control during curing
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 Fraunhofer-Institut für Chemische Technologie, Institutsteil ICT-IMM. Jahresbericht 2016
Jahresbericht
Annual Report
2017 Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2016/2017
Jahresbericht
Annual Report
2017 Funktionsintegrierter Leichtbau
Henning, Frank; Karcher, Michael; Kärger, Luise; Müller, Timo
Aufsatz in Buch
Book Article
2017 Hexaphenoxycyclotriphosphazene as FR for CFR anionic PA6 via T-RTM: A study of mechanical and thermal properties
Höhne, Carl-Christoph; Wendel, Rainer; Käbisch, Bert; Anders, Thorsten; Henning, Frank; Kroke, Edwin
Zeitschriftenaufsatz
Journal Article
2017 Hollow microsphere collapse sensitization of emulsion explosives - modeling and experimental results
Pimenta, J.; Quaresma, J.; Campos, J.; Deimling, Lukas; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2017 Hydrogen oxidation reaction under HT-PEMFCs conditions: Inhibition due to fuel contaminants
Rau, M.; Jung, F.; Cremers, C.
Konferenzbeitrag
Conference Paper
2017 Hydrogen production with a microchannel heat-exchanger reactor by single stage water-gas shift; catalyst development
Izquierdo, U.; Neuberg, Stefan; Pecov, Sascha; Pennemann, Helmut; Zapf, Ralf; Wichert, Martin; Barrio, V.L.; Cambra, J.F.; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2017 Impact of HP-RTM Process Parameters on Mechanical Properties with Epoxy and Polyurethane Systems
Swentek, Ian; Beck, Björn; Ugresic, Vanja; Potyra, Tobias; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2017 Implementierung & Untersuchung von Aptamer-Modifizierten Dickschichtelektroden zur Elektrochemischen Detektion von Kokain
Diebold, Verena
Master Thesis
2017 Improved signal recovery for flow cytometry based on 'spatially modulated emission'
Quint, Stephan; Wittek, Joern; Spang, Peter; Levanon, Nadav; Walther, Thomas; Baßler, Michael
Zeitschriftenaufsatz
Journal Article
2017 Influence of mechanical activation on the properties of natural zeolites from Tokaj Mountain
Buzimov, A.Y.; Kulkov, S.N.; Kurovics, E.; Eckl, Wilhelm; Pappert, Sandra
Konferenzbeitrag
Conference Paper
2017 Influence of mixing ratio on the reaction behavior of ternary thermits
Roth, Evelin; Weiser, Volker; Lity, André; Raab, A.
Konferenzbeitrag
Conference Paper
2017 Influence of the manufacturing process (comparison MuCell and Direct-LFT) of foamed and fiber reinforced polymer sandwich structures on the fiber length
Lohr, Christoph; Menrath, Andreas; Elsner, Peter; Weidenmann, Kay André
Konferenzbeitrag
Conference Paper
2017 Influence of the slurry thickness and heat treatment parameters on the formation of aluminium diffusion coating
Bermejo Sanz, Jorge; Roussel Garcia, Raquel; Kolarik, Vladislav; Juez Lorenzo, Maria del Mar
Zeitschriftenaufsatz
Journal Article
2017 Influence of water during manufacturing of APA6 in the thermoplastic RTM process
Wendel, Rainer; Thoma, Bernd; Henning, Frank
Konferenzbeitrag
Conference Paper
2017 Injection molding of glass fiber reinforced polypropylene composite foams with laminate skins
Kasemphaibulsuk, Pibulchai; Holzner, Marcel; Kuboki, Takashi; Hrymak, Andrew
Konferenzbeitrag
Conference Paper
2017 Intrinsic Flammability of Polyurethane Flexible Foams
Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin
Poster
2017 Investigation and comparison of known and new ADN stabilizers
Heil, Moritz; Müller, C.; Hickmann, J.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 Investigation of ageing behaviour of plasticised nitrocellulose - accelerated ageing and real ageing
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 Investigation of extinguished ADN/HTPB propellants with a special focus on sub-surface reactions
Weiser, Volker; Christilli, F.; Gettwert, Volker; Imiolek, Andreas; Kröber, Hartmut; Tagliabue, C.
Konferenzbeitrag
Conference Paper
2017 Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process
Behnisch, Felix; Rosenberg, Philipp; Weidenmann, Kay; Henning, Frank
Konferenzbeitrag
Conference Paper
2017 Investigation of the wetting behavior of Na and Na alloys on uncoated and coated Na-v""-alumina at temperatures below 150 °C
Ahlbrecht, Katharina; Bucharsky, C.; Holzapfel, Michael; Tübke, Jens; Hoffmann, M.J.
Zeitschriftenaufsatz
Journal Article
2017 Isolation und Anreicherung magnetisch markierter Zellen im Durchfluss
Wink, Markus; Baßler, Michael
Patent
2017 Kalibrierung von Temperatur- und Klimaprüfschränken
Cäsar, Joachim
Konferenzbeitrag
Conference Paper
2017 Kinetic control of block copolymer self-assembly in a micromixing device - mechanistical insight into vesicle formation process
Thiermann, Raphael; Bleul, Regina; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2017 Kontinuierliches Verfahren zur Herstellung von vesikulären oder scheibenförmigen, supramolekularen Nanopartikeln, und Verwendungen hiervon
Bleul, Regina; Thiermann, Raphael; Maskos, Michael
Patent
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2017 Luftschadstoffe im Innen- und Außenbereich - Problembeschreibung und Lösungsansätze
Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2017 Material compatibility of ORC working fluids with polymers
Eyerer, Sebastian; Eyerer, Peter; Eicheldinger, Markus; Sax, Sebastian; Wieland, Christoph; Spliethoff, Hartmut
Zeitschriftenaufsatz
Journal Article
2017 Material properties of electrodes for photovoltaic-coupled polymer electrolyte membrane water electrolysis
Baumann, Nils
Dissertation
Doctoral Thesis
2017 Material selection for CFRP-aluminium-foam-sandwiches manufactured by a PUR spraying process
Rupp, Peter; Elsner, Peter; Weidenmann, Kay André
Konferenzbeitrag
Conference Paper
2017 Mechanical properties of Desmophen-2200® based elastomer samples plasticized with energetic ionic liquids
Lemos, Mauricio Ferrapontoff; Bohn, Manfred; Schaller, Uwe
Konferenzbeitrag
Conference Paper
2017 Medium-temperature molten sodium batteries with aqueous bromine and iodine cathodes
Holzapfel, Michael; Wilde, Dion; Hupbauer, Cornelius; Ahlbrecht, Katharina; Berger, Thomas
Zeitschriftenaufsatz
Journal Article
2017 Mg+REE alloying process test unit
Val, Diego
Bericht
Report
2017 Microwave energy assisted synthesis of poly lactic acid via continuous reactive extrusion: Modelling of reaction kinetics
Dubey, Satya; Abhyankar, Hrushikesh; Marchante, Veronica; Brighton, James; Bergmann, Bjrn; Trinh, Giang; David, Chantal
Zeitschriftenaufsatz
Journal Article
2017 Mikrofluidisches Zellzählmodul zur Detektion von Pathogenen in Flüssigkeiten: Automatisiert, intergrierbar und robust
Alebrand, Sabine; Spang, Peter; Welzel, Knut; Wittek, Joern; Tracksdorf, Martin; Dethling, Dennis; Schwind, Carmen; Oster, Cornelius; Baßler, Michael
Konferenzbeitrag
Conference Paper
2017 Modeling and validation of gripper induced membrane forces in finite element forming simulation of continuously reinforced composites
Poppe, C.; Joppich, T.; Dörr, D.; Kärger, L.; Henning, F.
Konferenzbeitrag
Conference Paper
2017 Modeling of the non-isothermal crystallization kinetics of polyamide 6 composites during thermoforming
Kugele, Daniel; Dörr, Dominik; Wittemann, Florian; Hangs, Benjamin; Rausch, Julius; Kärger, Luise; Henning, Frank
Konferenzbeitrag
Conference Paper
2017 Modeling size-controlled assembly of polymeric nanoparticles in interdigital micromixers
Keßler, Simon
Dissertation
Doctoral Thesis
2017 Modeling, simulation and characterization of complex shaped solid propellant combustion
Wurster, Sebastian
Zeitschriftenaufsatz
Journal Article
2017 Modelling of Thermite Mixtures
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker
Konferenzbeitrag
Conference Paper
2017 Möglichkeiten der Verfahrensintensivierung von reaktiven Extrusionen am Beispiel der Herstellung von Polylactid
Bergmann, Björn
Dissertation
Doctoral Thesis
2017 New benchmark in the tailored blank manufacturing - high volume production in an exceptional quality
Graf, Matthias; Baumgärtner, Sebastian; Henning, Frank
Konferenzbeitrag
Conference Paper
2017 Nitrocellulose and stabilizers: DFT calculations of bond dissociation and reactions
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 Nitrocellulose decomposition quantum mechanical calculations
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design
Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O.
Zeitschriftenaufsatz
Journal Article
2017 On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics
Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L.
Konferenzbeitrag
Conference Paper
2017 One-pot synthesis of cationic gold nanoparticles by differential reduction
Sperling, Ralph A.; García-Fernández, Lorena; Ojea-Jiménez, Isaac; Piella, Jordi; Bastús, Neus G.; Puntes, V.
Zeitschriftenaufsatz
Journal Article
2017 Opening of new synthetic routes using segmented microflow in multistep syntheses
Karl, Dominik; Börner, P.; Misuk, Viktor; Löwe, Holger
Zeitschriftenaufsatz
Journal Article
2017 Optical properties of hydrogels filled with dispersed nanoparticles
Samaryk, Volodymyr; Varvarenko, Sergiy; Nosova, Nataliya; Fihurka, Nataliia; Musyanovych, Anna; Landfester, Katharina; Popadyuk, Nadiya; Voronov, Stanislav
Zeitschriftenaufsatz
Journal Article
2017 Optofluidic sensor system with Ge PIN photodetector for CMOS-compatible sensing
Augel, L.; Berkmann, F.; Latta, Daniel; Fischer, I.A.; Bechler, S.; Elogail, Y.; Kostecki, K.; Potje-Kamloth, Karin; Schulze, J.
Zeitschriftenaufsatz
Journal Article
2017 Oxidation of La-Sr-Mn-coated interconnector alloys for steam electrolysis under pressure in pure oxygen and in pure steam
Juez Lorenzo, Maria del Mar; Kolarik, Vladislav; Kuchenreuther-Hummel, Veronica; Pötschke, Martin; Schimanke, Danilo
Zeitschriftenaufsatz
Journal Article
2017 Phenomena in combustion of propellants and explosives
Sammelband
Anthology
2017 Polymer chemistry
Koltzenburg, Sebastian; Maskos, Michael; Nuyken, Oskar
Buch
Book
2017 Polymerelektrolyt-Brennstoffzellensystem für ein autonomes Unterwasserfahrzeug
Hitscherich, Manuel
Dissertation
Doctoral Thesis
2017 Positive weathering results as milestones in the development of thermochromic nanocoatings
Schmid, Helmut
Konferenzbeitrag
Conference Paper
2017 Production and comparison of artificially aged microplastic particles
Patzak, Carolin; Reichert, Thomas; Forberger, Jens
Konferenzbeitrag
Conference Paper
2017 Produktgestaltung in der Partikeltechnologie. Bd.8
Tagungsband
Conference Proceeding
2017 Produktionskonzepte für intensivierte Prozesse im Container. Potenzial noch lange nicht ausgeschöpft
Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2017 Prozesskette zur Herstellung textiler 3D-Preforms: Einsatz der Tufting- und Partikelschaumtechnologie zur sequenziellen Umformung textiler Halbzeuge
Schöfer, Sven; Schmitz, Matthias; Gries, Thomas; Mack, Christoph; Basler, Aaron
Zeitschriftenaufsatz
Journal Article
2017 Pull-out testing of multiscale structured metallic z-reinforcements for CFRP laminates
Juergens, Michael; Hafe Pérez Ferreira da Silva, Manuel Tiago von; Heimbs, Sebastian; Lang, Holger; Ladstaetter, Elisabeth; Hombergsmeier, Elke
Zeitschriftenaufsatz
Journal Article
2017 Quantitative kinetic analysis of a PdAu3 alloy catalyst for oxygen electro-reduction
Kurnatowski, Martin von; Bortz, Michael; Klein, Peter; Kintzel, Birgit; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2017 Real-time spectroscopy enabled by external cavity QCLs with MOEMS diffraction gratings
Butschek, Lorenz; Hugger, Stefan; Jarvis, Jan-Philip; Härtelt, Marko; Merten, André; Grahmann, Jan; Boskovic, Dusan; Fuchs, Frank; Ostendorf, Ralf; Schilling, Christian; Rattunde, Marcel; Wagner, Joachim
Konferenzbeitrag
Conference Paper
2017 REE recovery technology demonstrator
Sgarioto, Serena; Lagioia, Rocco; Nioac de Salles, Ana Claudia
Bericht
Report
2017 Remarks on the Evolution of Explosives
Homburg, A.
Editorial
2017 Revealing the initial reaction behavior in the continuous synthesis of metal-organic frameworks using real-time synchrotron X-ray analysis
Polyzoidis, Angelos; Etter, Martin; Herrmann, Michael; Löbbecke, Stefan; Dinnebier, Robert E.
Zeitschriftenaufsatz
Journal Article
2017 Rheological In-Mold Measurements and Characterizations of Sheet-Molding-Compound (SMC) Formulations with Different Constitution Properties by Using a Compressible Shell Model
Hohberg, Martin; Kärger, Luise; Bücheler, David; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2017 Safety-related design of the process chain for a robotic recovery and disposal process from ammunition and explosives handling to disposal
Müller, Paul; Keßler, Armin
Konferenzbeitrag
Conference Paper
2017 Scaling of magnesium recycling and alloying procedures
Val, Diego
Bericht
Report
2017 Schmierölzustandsüberwachung mittels nicht-dispersiver spektroskopischer Online-Sensoren
Klotzbücher, Thomas
Zeitschriftenaufsatz
Journal Article
2017 Selective hydrogenation of alkynes over ppm-level Pd/boehmite/Al2O3 beads in a continuous-flow reactor
Wu, Zhilin; Calcio Gaudino, Emanuela; Manzoli, Maela; Martina, Katia; Drobot, Maxime; Krtschil, Ulrich; Cravotto, Giancarlo
Zeitschriftenaufsatz
Journal Article
2017 Selective solvent evaporation from binary mixtures of water and tetrahydrofuran using a falling film microreactor
Bomhard, Sibylle von; Schelhaas, Karl-Peter; Alebrand, Sabine; Musyanovych, Anna; Maskos, Michael; Drese, Klaus Stefan
Zeitschriftenaufsatz
Journal Article
2017 Simulating copolymeric nanoparticle assembly in the co-solvent method: How mixing rates control final particle sizes and morphologies
Keßler, Simon; Drese, Klaus Stefan; Schmid, Friederike
Zeitschriftenaufsatz
Journal Article
2017 Simulation of the influence of embedded inserts on the RTM filling behavior considering local fiber structure
Seuffert, Julian; Kärger, Luise; Henning, Frank
Konferenzbeitrag
Conference Paper
2017 Solid propellant burn rate measurement in a micro closed bomb
Wurster, Sebastian
Konferenzbeitrag
Conference Paper
2017 Solid-liquid adhesion energies of composite propellant components determined by solution calorimetry
Nardai, Michael M.; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2017 Steam gasification of biomass with subsequent syngas adjustment using shift reaction for syngas production
Pala, L.P.R.; Wang, Q.; Kolb, G.; Hessel, V.
Zeitschriftenaufsatz
Journal Article
2017 Subcop - protection against suicide bomber attacks
Bernewitz, Johanna; Armbrust, Torsten; Hummel, Marc; Klemenz, Melanie; Neutz, Jochen; Roussel Garcia, Raquel
Konferenzbeitrag
Conference Paper
2017 Supported IrxRu1-xO2 anode catalysts for PEM-water electrolysis
Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2017 Synthesis of P(GAP-CO-EPH) - an energetic copolyether suitable for cast-cure applications
Hafner, Sven; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2017 Systematic classification of micromixers
Kretzschmar, Thomas; Baßler, Michael; Drese, Klaus Stefan
Konferenzbeitrag
Conference Paper
2017 Temperature gradient elution and superheated eluents in chip-HPLC
Heiland, Josef J.; Lotter, Carsten; Stein, Volkmar; Mauritz, Laura; Belder, Detlev
Zeitschriftenaufsatz
Journal Article
2017 The connection between WLF equation and the Arrhenius equation
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 The influence of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2017 The REACH impact on gun propellant formulations
Böhnlein-Mauß, Jutta; Kröber, Hartmut
Zeitschriftenaufsatz
Journal Article
2017 The role of phosphate additive in stabilization of sulphuric-acid-based vanadium(V) electrolyte for all-vanadium redox-flow batteries
Roznyatovskaya, Nataliya; Roznyatovsky, Vitaly A.; Höhne, Carl-Christoph; Fühl, Matthias; Gerber, Tobias; Küttinger, Michael; Noack, Jens; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2017 Thermal behavior of ADN & ADN prills - crystal and micro structure. Part I
Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Paul-Bernd; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2017 Thermal characterization of polyurethane foams with phase change material
Amaral, Claudia; Vicente, R.; Eisenblätter, J.; Marques, P.A.A.P.
Zeitschriftenaufsatz
Journal Article
2017 Turbidimetric method for the determination of particle sizes in polypropylene/clay-composites during extrusion
Becker, Wolfgang; Guschin, Viktor; Mikonsaari, Irma; Teipel, Ulrich; Kölle, Sabine; Weiss, Patrick
Zeitschriftenaufsatz
Journal Article
2017 Untersuchung des Einflusses von mineralischen Additiven auf die mechanischen Eigenschaften von Polylactid
Peters, Jenny
Bachelor Thesis
2017 Untersuchungen an Anodenmaterialien für die Alkalische Direkt-Methanol-Brennstoffzelle
Jurzinsky, Tilman
Dissertation
Doctoral Thesis
2017 Validation of weak biological effects by round robin experiments: Cytotoxicity/biocompatibility of SiO2 and polymer nanoparticles in HepG2 cells
Landgraf, Lisa; Nordmeyer, Daniel; Schmiel, Peter; Gao, Qi; Ritz, Sandra; Gebauer, Julia S.; Graß, Stefan; Diabaté, Silvia; Treuel, Lennart; Graf, Christina; Rühl, Eckart; Landfester, Katharina; Mailänder, Volker; Weiss, Carsten; Zellner, Reinhard; Hilger, Ingrid
Zeitschriftenaufsatz
Journal Article
2017 Vanadium proton exchange membrane water electrolyser
Noack, Jens; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2017 Verfahren und Vorrichtung zur Konsolidierung von imprägnierten Faserverbundstrukturen
Baumgärtner, Sebastian; Henning, Frank; Lohr, Christoph
Patent
2017 Verfahren und Vorrichtung zur Prüfung der Staubdichtigkeit und / oder des Staubadsorptionsvermögens von Gegenständen
Cäsar, Joachim; Teipel, Ulrich
Patent
2017 Verfahren zur Herstellung von stabil dispergierbaren magnetischen Eisenoxid-Einkern-Nanopartikel, stabil dispergierbare magnetische Eisenoxid-Einkern-Nanopartikel und Verwendungen hiervon
Bleul, Regina; Thiermann, Raphael
Patent
2017 Verwendung von offen strukturierten, hydrophil modifizierten, mesoporösen Mikro-SiO2-Partikeln zur Abwehr von Hagel und/oder zur Auslösung der Abregnung einer Gewitterwolke und Verfahren zur Herstellung besagter Partikel
Schmid, Helmut; Eckl, Wilhelm; Inone-Kauffmann, Emilia Regina
Patent
2017 Vesicles from amphiphilic dumbbells and janus dendrimers: Bioinspired self-assembled structures for biomedical applications
Tabaache, Soraya; Bertin, Annabelle
Zeitschriftenaufsatz
Journal Article
2017 Zirkulierende Tumorzellen - voll automatisierte Vereinzelung aus Blut
Alebrand, Sabine; Freese, Christian; Schunck, Tobias; Baßler, Michael
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2016

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2016 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2016 4. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2016
Tagungsband
Conference Proceeding
2016 A brain-spine interface alleviating gait deficits after spinal cord injury in primates
Capogrosso, Marco; Milekovic,Tomislav; Borton, David; Wagner, Fabien; Moraud, Eduardo Martin; Mignardot, Jean-Baptiste; Buse, Nicolas; Gandar, Jérôme; Barraud, Quentin; Xing, David; Rey, Elodie; Duis, Simone; Jianzhong, Yang; Ko, Wai Kin D.; Li, Qin; Detemple, Peter; Denison, Tim; Micera, Silvestro; Bezard, Erwan; Bloch, Jocelyne; Courtine, Gregoire
Zeitschriftenaufsatz
Journal Article
2016 A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature
Dörr, D.; Joppich, T.; Schirmaier, F.; Mosthaf, T.; Kärger, L.; Henning, F.
Konferenzbeitrag
Conference Paper
2016 A review of using spray pyrolysis through sol-gel materials in the synthesis of cathode materials for lithium-ion batteries. Review article
Snyders, Charmelle D.; Ferg, Ernst E.; Schülein, Julian; Löwe, Holger
Zeitschriftenaufsatz
Journal Article
2016 A unified kinetic model for adsorption and desorption - Applied to water on zeolite
Gaulke, M.; Guschin, V.; Knapp, Sebastian; Pappert, Sandra; Eckl, Wilhelm
Zeitschriftenaufsatz
Journal Article
2016 Accelerated aging and cure kinetics of butacene® containing composite propellants
Seyidoglu, Tijen; Bohn, Manfred A.; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2016 Accurate cure modeling for isothermal processing of fast curing epoxy resins
Bernath, Alexander; Kärger, Luise; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2016 Advanced approaches to the CL-20/HMX cocrystal
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2016 An alternative geometry for bolometer sensors for use at high operating temperatures
Meister, H.; Langer, H.; Schmitt, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Analyse der Fließfrontprogression während des Injektionsprozesses lokal verstärkter Kohlenstofffaserhalbzeuge im RTM-Verfahren
Stanglmaier, S.; Vukoje, D.; Bickerton, S.; Hodde, J.; Repper, A.; Thoma, B.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2016 Analysis of CIE-color values using the example of tracer munition
Knapp, Sebastian; Bieroth, D.; Kelzenberg, Stefan; Lity, André; Poth, H.; Raab, Angelika; Roth, Evelin; Weiser, Volker
Konferenzbeitrag
Conference Paper
2016 Analysis of fiber orientation, microstructure and mechanical properties of specimens made from fiber-reinforced ABS manufactured by Fused Filament Fabrication (FFF)
Weidenmann, Kay A.; Baumann, Sascha; Pinter, Pascal; Elsner, Peter
Konferenzbeitrag
Conference Paper
2016 Analyzing the migration of plasticizers in powders by imaging spectroscopy
Pontius, Heike; Dörich, Manuela; Heil, Moritz
Konferenzbeitrag
Conference Paper
2016 Applications of Lignin Materials and Their Composites (Lignin Applications in Various Industrial Sectors, Future Trends of Lignin and Their Composites)
Naegele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffman, Emilia Regina; Eisenreich, N.
Aufsatz in Buch
Book Article
2016 Aufbereitung lignocellulosehaltiger nachwachsender Rohstoffe
Eisenlauer, M.; Teipel, Ulrich
Konferenzbeitrag
Conference Paper
2016 Batch versus flow acetalization of benzaldehyde with HKUST-1: Diffusion pathways and performance comparison
Piscopo, Calogero; Schwarzer, Maud; Herrmann, Michael; Affini, Anna; Pelagatti, Paolo; Maestri, Giovanni; Maggi, Raimondo; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Beitrag zur Umsetzung, Charakterisierung und Evaluierung eines Direktverfahrens zur Herstellung von strukturellen Bauteilkomponenten aus kohlenstofffaserverstärktem Kunststoff (InlinePrepreg)
Karcher, Michael
Dissertation
Doctoral Thesis
2016 Bestimmung der Aushärtekinetik eines 2-stufig aushärtenden Epoxidharzes zur Herstellung von Hochleistungsfaserverbunden
Karcher, Michael; Chaloupka, Alexander; Henning, Frank; Schmölzer, Stefan; Moukhina, Elena
Zeitschriftenaufsatz
Journal Article
2016 Bewertung der mechanischen und ökologischen Aspekte des thermischen Recyclings von Faserverbundwerkstoffen
Manis, Frank; Betz, Tobias; Wölling, Jakob; Drechsler, K.
Konferenzbeitrag
Conference Paper
2016 Bifunktionelle Synthesebausteine durch hydrothermale Verflüssigung von Organosolv-Lignin
Dahmen, N.; Hornung, U.; Schuler, J.; Schmiedl, Detlef; Rohde, V.
Zeitschriftenaufsatz
Journal Article
2016 Burning behavior of AN/ADN propellants
Tagliabue, C.; Weiser, Volker; Imiolek, Andreas; Bohn, Manfred A.; Heintz, Thomas; Gettwert, Volker
Konferenzbeitrag
Conference Paper
2016 Carboxyl- and amino-functionalized polystyrene nanoparticles differentially affect the polarization profile of M1 and M2 macrophage subsets
Fuchs, Ann-Kathrin; Syrovets, Tatiana; Haas, Karina A.; Loos, Cornelia; Musyanovych, Anna; Mailänder, Volker; Landfester, Katharina; Simmet, Thomas
Zeitschriftenaufsatz
Journal Article
2016 Catalytic methanol steam reforming
Kolb, Gunther
Aufsatz in Buch
Book Article
2016 Catalytic reactors for fuel processing
Kolb, Gunther
Aufsatz in Buch
Book Article
2016 Catalytic reformer off-gas
Kolb, Gunther
Aufsatz in Buch
Book Article
2016 Catalytic reforming of methane and other hydrocarbons
Kolb, Gunther
Aufsatz in Buch
Book Article
2016 Catalytic wall reactor
Kolb, Gunther
Aufsatz in Buch
Book Article
2016 Characterisation and modelling of the curing reaction of HTPB with isocyanates by reaction heat determined by heat flow microcalorimetry and by volume shrinkage determined with a pressure curing cell
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2016 Characterisation of different gun propellants by long-term mass loss
Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Characterisation of the curing reaction of HTPB with isocyanate by heat flow microcalorimetry
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF)
Schirmaier, F.J.; Weidenmann, K.A.; Kärger, L.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2016 Characterization of membrane electrode assemblies for high-temperature PEM fuel cells
Rau, M.; Niedergesäß, A.; Cremers, Carsten; Alfaro, S.; Steenberg, T.; Hjuler, H.A.
Zeitschriftenaufsatz
Journal Article
2016 Characterization of metal-organic frameworks using X-ray diffraction
Herrmann, Michael; Kempa, Paul Bernd; Fietzek, Harald; Altenburg, Thomas; Polyzoidis, Angelos; Piscopo, Calogero; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Characterization of nanoparticle layers deposited by wire explosions
Knapp, Sebastian; Eickershoff, B.; Eißler, Carmen; Fietzek, Harald; Günthner, Christian; Koleczko, Andreas; Schuppler, Heike
Konferenzbeitrag
Conference Paper
2016 Characterization of nanoparticles under physiological conditions
Eslahian, K.A.; Lang, T.; Bantz, C.; Keller, R.; Sperling, R.; Docter, D.; Staubner, R.; Maskos, M.
Aufsatz in Buch
Book Article
2016 Characterization of several HTPB binder samples by NMR, GPC and OH-number
Kaiser, M.; Ditz, B.; Dörich, Manuela; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 CI3: Entwicklung eines Mikrofluidik-basierten Systems zur Anreicherung und Einzelzell-Analyse von zirkulierenden Tumorzellen
Himmelreich, Ralf; Potje-Kamloth, Karin
Bericht
Report
2016 Cohesive zone model parameterization by molecular dynamics
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Combining wave and spectroscopic techniques to monitor the development of thermosets during cure
Puentes, John; Wruck, Lorenz; Chaloupka, Alexander; Rudolph, Natalie; Osswald, Tim A.
Konferenzbeitrag
Conference Paper
2016 Comparative NMR study of nPrBTP and iPrBTP
Adam, C.; Rohde, V.; Müllich, U.; Kaden, P.; Geist, A.; Panak, P.J.; Geckeis, H.
Zeitschriftenaufsatz
Journal Article
2016 Composite materials ready to replace aluminium in internal combustion engines
Keyser, H. de; Berg, Lars-Fredrik; Stammler, J.
Zeitschriftenaufsatz
Journal Article
2016 Consumption of Atmospheric Oxygen as Ageing Indicator of HTPB-based Solid Rocket Propellants
Mußbach, Günter; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Consumption of atmospheric oxygen as ageing indicator of HTPB-based solid rocket propellants
Mußbach, Günter; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Continuous microreactor synthesis of ZIF-8 with high space-time-yield and tunable particle size
Polyzoidis, Angelos; Altenburg, T.; Schwarzer, Maud; Löbbecke, Stefan; Kaskel, S.
Zeitschriftenaufsatz
Journal Article
2016 Continuous synthesis of nanoparticles and online process analytics
Sperling, Ralph A.; Schindler, Christoph; Hofmann, Christian; Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2016 Continuous synthesis of single-core iron oxide nanoparticles for biomedical applications
Baki, Abdulkader; Bleul, Regina; Bantz, Christoph; Thiermann, Raphael; Maskos, Michael
Konferenzbeitrag
Conference Paper
2016 Continuously manufactured polymersomes by self-assembly using micro technology
Bomhard, Sibylle von; Bleul, Regina; Maskos, Michael
Video
2016 Continuously operated falling film microreactor for selective hydrogenation of carbon-carbon triple bonds
Rehm, Thomas H.; Berguerand, Charline; Ek, Satu; Zapf, Ralf; Löb, Patrick; Nikoshvili, Linda; Kiwi-Minsker, Lioubov
Zeitschriftenaufsatz
Journal Article
2016 Control of autothermal reforming reactor of diesel fuel
Dolanc, Gregor; Pregelj, Bostjan; Petrovcic, Janko; Pasel, Joachim; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2016 Controlled self-assembly of dendritic amphiphiles in micromixers
Bertin, A.; Taabache, S.; Maskos, M.
Zeitschriftenaufsatz
Journal Article
2016 Cyclotriphosphazene und deren Potential als Flammschutzmittel in Polymeren
Käbisch, Bert
Dissertation
Doctoral Thesis
2016 D 6.3 Communication Plan
Lagioia, Rocco
Bericht
Report
2016 D 6.4 PEDR Plan for the Exploitation and Dissemination of Results
Lafioia, Rocco
Bericht
Report
2016 D 7.1 First Progress Report Part B
Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco
Bericht
Report
2016 D1.2 REE Balance Problem Analysis
Binnemans, Koen; Jones, Peter Tom
Bericht
Report
2016 D2.2 Magnesium Recycling Routes Optimization
Rodriguez, Alicia; San José, Ruth
Bericht
Report
2016 D3.1 Report on the capabilities, facilities, networking and funding sources of the consortium partners in the field of forest biomass secondary processing
Nikkanen, Ville; Mikonsaari, Irma; Moser, Kevin; Reinhardt, Sebastian; Roßberg, Christine; Bruyne, F. de; Anghel, N.; Rautio, J.; Härkönen, M.; Tukiainen, P.; Gravitis, J.; Andzs, M.; Ubele, D.; Tschentscher, R.; Aasen, I.-M.; Balzer Le, S.; Joffres, B.; Johnson, K.; Mackintosh, W.; Joelson, J.; Söderberg, D.; Garcia Jaca, J.; Silva Perez, D. da; Malin, M.
Bericht
Report
2016 Data interpretation and comparison of DMA results from HTPB-IPDI bonded composite elastomer samples used in an international Round Robin Test
Bohn, Manfred A.; Kronis-Rudigier, Gunnar; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2016 Debond on command: Fast debonding by exothermic reaction due to microwave activation
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Konferenzbeitrag
Conference Paper
2016 Debonding using exothermic reactions
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Decrease of methyl methacrylate miniemulsion polymerization rate with incorporation of plant oils
Costa, Cristiane; Wagner, Manfred; Musyanovych, Anna; Landfester, Katharina; Sayer, Claudia; Araújo, Pedro H.H.
Zeitschriftenaufsatz
Journal Article
2016 Deliverable 4.2. Report on other main European and global players in the field of separation and downstream processing
Nikkanen, Ville; Böringer, Sarah; Roßberg, Christine; Fornell, R.; Johnson, K.; MacIntosh, W.; Illergard, J.; Tschentscher, R.; Joffres, B.; Hesser, F.; Hedeler, B.; Andzs, M.; Spiridon, I.; Stelian, V.; Bruyne, F. de; Azpeitia, M.; Ipinazar, E.; Grönroos, A.; Tukiainen, P.; Härkönen, M.; Malin, M.
Bericht
Report
2016 Design, fabrication and embedding of microscale interdigital sensors for real-time cure monitoring during composite manufacturing
Moghaddam, M.K.; Breede, A.; Chaloupka, A.; Bödecker, A.; Habben, C.; Meyer, E.-M.; Brauner, C.; Lang, W.
Zeitschriftenaufsatz
Journal Article
2016 Detection of capacity imbalance in vanadium electrolyte and its electrochemical regeneration for all-vanadium redox-flow batteries
Roznyatovskaya, Nataliya; Herr, T.; Küttinger, M.; Fühl, Matthias; Noack, Jens; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Development and physicochemical characterization of continuously manufactured single-core iron oxide nanoparticles
Bantz, Christoph; Bleul, Regina; Baki, Abdulkader; Thiermann, Raphael; Löwa, Norbert; Eberbeck, Dietmar; Trahms, Lutz; Maskos, Michael
Konferenzbeitrag
Conference Paper
2016 Development of a novel consolidation process for continuous-fiber-reinforced thermoplastics
Baumgärtner, Sebastian; Lohr, C.; Henning, Frank
Konferenzbeitrag
Conference Paper
2016 Development of reformed ethanol fuel cell system for backup and off-grid applications - system design and integration
Koski, Pauli; Pulkkinen, Valtteri; Auvinen, Sonja; Ihonen, Jari; Karimäki, Henri; Keränen, Timo; Ryden, Agnes; Tingelöf, Thomas; Limonta, Stefano; Croci, Diego; Fracas, Paolo; Wichert, Martin; Kolb, Gunther; Magalhaes, Roberto; Relvas, Frederico; Boaventura, Marta; Mendes, Adelio
Konferenzbeitrag
Conference Paper
2016 Development study of an air independent fuel cell system for an autonomous underwater vehicle (AUV)
Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2016 Die Tücke liegt im Detail - Ringversuch zum Thema Mischgasprüfung
Lauff, Mareike; Cäsar, Joachim; Beier, Jochen
Konferenzbeitrag
Conference Paper
2016 Diffusion and lifetime modeling for slurry aluminide coating on P92 at 650°C with a computational and experimental approach
Krukovskyi, P.; Metel, M.; Agüero, A.; Muelas, R.; Kolarik, Vladislav
Zeitschriftenaufsatz
Journal Article
2016 Direct adhesion of CFR-thermoplast on steel - testing and simulation of the lap shear fracture
Yüksel, Ferhat; Hinterhölzl, Roland; Drechsler, Klaus
Konferenzbeitrag
Conference Paper
2016 Direct Simulation of PBX Uniaxial Tensile Testing by Molecular Dynamics
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Dispergierung und Eigenschaften von Carbon Nanotubes
Dresel, A.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2016 Durch exotherme Reaktionen schnell entkleben
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkler, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Dynamic mechanical analysis of nitrocellulose-plasticizer mixtures
Mitró, Daniel; Böhnlein-Mauß, Jutta
Konferenzbeitrag
Conference Paper
2016 Effect of Butacene® on ageing of composite propellants
Seyidoglu, Tijen; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Effect of different technological and energy supply related measures on the primary energy demand of CFPR production
Wehner, Daniel; Hohmann, Andrea; Schwab, Bernhard; Albrecht, Stefan; Ilg, Robert; Sedlbauer, Klaus; Leistner, Philip; Drechsler, Klaus
Konferenzbeitrag
Conference Paper
2016 Effect of model fuel impurities for reformed jet fuels on the hydrogen oxidation at platinum based catalysts under HT-PEMFC conditions
Cremers, C.; Rau, M.S.; Niedergesäß, A.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2016 Effizient zum maßgeschneiderten Organoblech
Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin
Zeitschriftenaufsatz
Journal Article
2016 EILs - suitable substances for future energetic applications?
Schaller, Uwe; Keicher, Thomas; Schlechtriem, Stefan; Krause, Horst
Konferenzbeitrag
Conference Paper
2016 Einfluss der Eindickung von dichtereduziertem Sheet Moulding Compound auf die Formteilwelligkeit
Keckl, Christoph
Dissertation
Doctoral Thesis
2016 Einsatz der ortsaufgelösten Röntgenbeugung zur Untersuchung der Destabilisierungstiefe von Wärmedämmschichten
Kolarik, Vladislav; Kuchenreuther, V.; Juez-Lorenzo, Maria; Fietzek, Harald; Stamm, W.
Konferenzbeitrag
Conference Paper
2016 Electrochemiluminescence (ECL) immunosensor for detection of Francisella tularensis on screen-printed gold electrode array
Spehar-Délèze, Anna-Maria; Julich, Sandra; Gransee, Rainer; Tomaso, Herbert; Dulay, Samuel B.; O'Sullivan, Ciara K.
Zeitschriftenaufsatz
Journal Article
2016 Emission spectroscopy on pyrotechnic mixtures
Knapp, Sebastian; Günthner, Christian; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Weiser, Volker
Konferenzbeitrag
Conference Paper
2016 Energetic Materials. Synthesis, Characterization, Processing
Tagungsband
Conference Proceeding
2016 Energetic Nanomaterials: Synthesis, Characterization, and Application
Sammelband
Anthology
2016 Energetische Demontage von Kompositmaterialien am Beispiel Rotorblatt
Seiler, Elisa; Materna, U.; Teipel, Ulrich
Konferenzbeitrag
Conference Paper
2016 Energieeffiziente Herstellung komplexer Hochleistungsfaserverbundbauteile mittels Pultrusion, In-Line Flechten, Blasumformung und Endbearbeitung (PulForm)
Bericht
Report
2016 Energy efficiency and ecological benefits of a self-heated CFRP tool designed for resin transfer moulding
Arikan, Elisa; Hohmann, A.; Kammerhofer, P.; Reppe, M.; Remer, Niklas; Drechsler, K.
Konferenzbeitrag
Conference Paper
2016 Entkleben unter Nutzung exothermer Reaktionen
Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Entwicklung einer Debonding-on-Demand-Konzeptlösung unter Verwendung funktioneller Suszeptor-Additivmaterialien zur Erzeugung von Thermoschocks
Sauer, Michael
Master Thesis
2016 Entwicklung eines Design for End of Life Tools für die Luftfahrtindustrie
Wimmer, A.K.; Nioac de Salles, Ana Claudia; Müller, T.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2016 Entwicklung eines mikrofluidisch und enzymatisch optimierten real-time PCR-Systems zur patientennahen Diagnostik von respiratorischen Erkrankungen
Brucker, Christian; Schunck, Tobias
Bericht
Report
2016 Ergebnisse einer Befragung zum Umgang mit Porenbetonabfällen aus dem Abbruch von Gebäuden
Stier, Christian; Forberger, Jens
Zeitschriftenaufsatz
Journal Article
2016 Ethanol oxidation reaction (EOR) investigation on Pt/C, Rh/C, and Pt-based bi- and tri-metallic electrocatalysts: A DEMS and in situ FTIR study
Bach Delpeuch, A.; Maillard, F.; Chatenet, M.; Soudant, P.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2016 European training network to accelerate the development chain of nanostructured polymers
Bericht
Report
2016 Evaluation of Different Commercially Available Surface-Enhanced Raman Spectroscopy (SERS) - Substrates and Improved Methods for Detection of Explosives
Schweikert, Wenka; Mendl, A.; Eichberger, Sascha
Konferenzbeitrag
Conference Paper
2016 Evaluation of metal-organic frameworks for gas-phase preconcentration and sample enrichment by inverse gas chromatography (IGC)
Rieger, Max; Wittek, Michael; Schnürer, Frank; Löbbecke, Stefan
Konferenzbeitrag
Conference Paper
2016 Evaluation of pressure stable chip-to-tube fittings enabling high-speed chip-HPLC with mass spectrometric detection
Lotter, Carsten; Heiland, Josef J.; Stein, Volkmar; Klimkait, Michael; Queisser, Marco; Belder, Detlev
Zeitschriftenaufsatz
Journal Article
2016 Evaluation of the efficiency and environmental impact of fire suppressants for forest fire fighting
Böhm, Dennis; Weinert, Michael; Gettwert, Volker; Weiser, Volker
Poster
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2016 Expanding Foam without Secondary Foaming
Jung, Marcus; Fischer, Sebastian; Gettwert, Volker
Poster
2016 Experimental analysis of gaps and overlaps caused by intra-ply sectorization in the thermoplastic automated fiber placement process
Zenker, Thomas; Schuerger, Christian; Drechsler, Klaus
Konferenzbeitrag
Conference Paper
2016 Experimental investigation of the radius forming behavior of fiber reinforced thermoplastics
Schug, A.; Hinterhölzl, R.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2016 Explosives
Meyer, R.; Köhler, J.; Homburg, Axel.
Buch
Book
2016 Fast heating of selective adsorber beads for large volume application
Heil, Moritz; Baumann, Sascha; Krause, Horst
Konferenzbeitrag
Conference Paper
2016 Feinzerkleinerung lignocellulosehaltiger Rohstoffe
Eisenlauer, M.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2016 Fire protection Coatings for Wood
Weinert, Michael; Gettwert, Volker
Poster
2016 First verification of the modified hartmann-apparatur with aluminum and magnesium particles
Kuchenreuther-Hummel, V.; Schneider, M.; Liehmann, M.; Neutz, J.
Konferenzbeitrag
Conference Paper
2016 Flexible intelligente Bearbeitungstechnologien für komplexe Faserverbundbauteile
Drechsler, Klaus
Buch
Book
2016 Fluidikstruktur mit Halteabschnitt und Verfahren zum Vereinigen zweier Flüssigkeitsvolumina
Latta, Daniel; Schunck, Tobias; Baßler, Michael; Spang, Peter; Holzki, Markus
Patent
2016 Fraunhofer-Institut für Chemische Technologie, Institutsteil ICT-IMM. Jahresbericht 2015
Jahresbericht
Annual Report
2016 Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2015/2016
Jahresbericht
Annual Report
2016 Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
Bericht
Report
2016 Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine
Bericht
Report
2016 Gasgenerator-Treibstoff auf der Basis von Ammoniumdinitramid (ADN) und Verfahren zu seiner Herstellung
Krause, Horst; Schlechtriem, Stefan; Weiser, Volker; Schaller, Uwe; Hürttlen, Jürgen
Patent
2016 Gestaltabweichungen dünnwandiger, lokal verstärkter CF/PPS Gelegelaminate
Hangs, Benjamin
Dissertation
Doctoral Thesis
2016 Green liquid propellant oxidizers basing on solutions of ADN and an in commercial hydrogen peroxide for hypergolic propellants
Weiser, Volker; Hürttlen, Jürgen; Schaller, Uwe; Imiolek, Andreas; Lity, André; Kelzenberg, Stefan
Konferenzbeitrag
Conference Paper
2016 Hand in Hand zu Serienlösungen
Karcher, Michael; Huber, Timo; Thoma, Bernd
Zeitschriftenaufsatz
Journal Article
2016 Highly active and durable Pt/In2O3/Al2O3 catalysts in methanol steam reforming
Liu, Di; Men, Young; Wanga, Jinguo; Kolb, Gunther; Liu, Xin; Wang, Yuanqiang; Sun, Qiuyan
Zeitschriftenaufsatz
Journal Article
2016 Highly-active Pd-Cu electrocatalysts for oxidation of ubiquitous oxygenated fuels
Serov, A.; Asset, T.; Padilla, M.; Matanovic, I.; Martinez, U.; Roy, A.; Artyushkova, K.; Chatenet, M.; Maillard, F.; Bayer, D.; Cremers, Carsten; Atanassov, P.
Zeitschriftenaufsatz
Journal Article
2016 Hot spots sensitization and optical detonation measurements of emulsion explosives
Quaresma, J.; Campos, J.; Pimenta, J.; Ribeiro, A.; Mendes, R.; Gois, J.; Deimling, Lukas; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2016 Hybrid resin improves position and alignment of continuously reinforced prepreg during compression co-molding with sheet molding compound
Bücheler, D.; Henning, F.
Konferenzbeitrag
Conference Paper
2016 Hydrogen production with a microchannel heat-exchanger reactor by single stage water-gas shift
Izquierdo, U.; Pennemann, Helmut; Zapf, Ralf; Neuberg, Stefan; García-García, I.; Barrio, V.L.; Cambra, J.F.; Kolb, Gunther
Konferenzbeitrag
Conference Paper
2016 Impact of water adsorbates on the acetaldehyde oxidation reaction on Pt- and Rh-based multimetallic electrocatalysts
Bach Delpeuch, A.; Cremers, Carsten; Chatenet, M.
Zeitschriftenaufsatz
Journal Article
2016 In-situ Characterization of Curing Reaction of GAP and Isocyanates by Near Infrared Spectroscopy
Imiolek, Andreas; Becker, Wolfgang; Sachsenheimer, K.; Weiser, Volker
Konferenzbeitrag
Conference Paper
2016 In-situ detection of phase transitions of semi-crystalline carbon fiber reinforced thermoplastics using dielectric analysis and its correlation to DMA and DSC
Chaloupka, A.; Grund, D.; Wedel, A.; Rudolph, N.M.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2016 In-situ Überwachung der kontinuierlichen Synthese van ZIF-8
Polyzoidis, Angelos; Dinnebier, Robert E.; Herrmann, Michael; Piscopo, Calogero Giancarlo; Löbbecke, Stefan
Konferenzbeitrag
Conference Paper
2016 Industrial waste residues evaluation
Sgarioto, Serena; Binnemans, Koen; Yurramendi, Lourdes
Bericht
Report
2016 Influence of aging on the burning behavior of ferrocene-type catalyzed composite rocket propellants
Imiolek, Andreas; Bohn, Manfred A.; Weiser, Volker; Seyidoglu, Tijen
Konferenzbeitrag
Conference Paper
2016 Influence of charge size on enhanced blast explosives
Gerber, P.; Happ, A.
Konferenzbeitrag
Conference Paper
2016 Influence of epoxy- and polyamide-compatible carbon fiber sizings on interfacial fracture toughness and in-plane shear properties of carbon fiber reinforced polyamide-6
Greisel, M.; Kurek, A.; Chaloupka, A.; Moosburger-Will, J.; Mueller, W.M.; Sause, M.G.R.; Horn, S.
Konferenzbeitrag
Conference Paper
2016 Influence of the Screw Configuration on the LFT-D Processing of Glass Fiber Reinforced PA6
Hümbert, Simon
Master Thesis
2016 Influence of various binders and oxidizers on the spectral emission of pyro-organic flares
Roth, E.; Weiser, Volker; Raab, Angelika; Lity, André
Konferenzbeitrag
Conference Paper
2016 Inhomogeneous growth of micrometer thick plasma polymerized films
Akhavan, Behnam; Menges, Bernhard; Förch, Renate
Zeitschriftenaufsatz
Journal Article
2016 Innovative Technologien für Ressourceneffizienz - Strategische Metalle und Mineralien
Sammelband
Anthology
2016 Integrated pre-concentrator gas sensor microsystem for ppb level benzene detection
Leidinger, M.; Rieger, M.; Sauerwald, T.; Alépée, C.; Schütze, A.
Zeitschriftenaufsatz
Journal Article
2016 Integrated pre-concentrator gas sensor system for improved trace gas sensing performance
Leidinger, M.; Sauerwald, T.; Schütze, A.; Alepee, C.; Rieger, M.
Konferenzbeitrag
Conference Paper
2016 INTRA r³+ - Integration und Transfer der r³-Fördermaßnahme
Dürkoop, Anke; Büttner, Philipp; Albrecht, Stefan; Brandstetter, Christian P.; Erdmann, Martin; Gräbe, Gudrun; Moller, Björn; Höck, Michael; Kleeberg, Kirstin; Rentsch, Lars; Schneider, Katja; Ostertag, Katrin; Pfaff, Matthias; Sartorius, Christian; Tercero Espinoza, Luis A.; Szurlies, Michael; Wilken, Hildegard
Aufsatz in Buch
Book Article
2016 Investigation of nitromethane as an ingredient in gelled propellants
Schaller, Uwe; Hürttlen, Jürgen; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2016 Investigation of ruthenium promoted palladium catalysts for methanol electrooxidation in alkaline media
Jurzinsky, T.; Kammerer, P.; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Investigation on the structural behavior of a metallically 3D-reinforced CFRP/CFRP joint using a variable search based on finite element analyzes
Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Hinterhölzl, R.; Drechsler, K.
Zeitschriftenaufsatz
Journal Article
2016 Kinetic investigations of the steam reforming of methanol over a Pt/In2O3/Al2O3 catalyst in microchannels
Wichert, Martin; Zapf, Ralf; Ziogas, Athanassios; Kolb, Gunther; Klemm, E.
Zeitschriftenaufsatz
Journal Article
2016 Kontrolle mikrobieller Umwelteinflüsse auf Produkte und Prozesse
Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian
Konferenzbeitrag
Conference Paper
2016 Labor auf dem Chip: Wie die Miniaturisierung eines Labors die Diagnose beschleunigt
Drese, Klaus Stefan
Zeitschriftenaufsatz
Journal Article
2016 Layup and process dependent wrinkling behavior of PPS/CF UD tape-laminates during non-isothermal press forming into a complex component
Joppich, T.; Doerr, D.; Meulen, L. van der; Link, T.; Hangs, B.; Henning, F.
Konferenzbeitrag
Conference Paper
2016 Lebensretter im Kreditkartenformat
Drese, Klaus Stefan
Zeitschriftenaufsatz
Journal Article
2016 Leichtbaupotenzial langfaserverstärkter Thermoplaste (LFT) in Integralschaumbauweise hergestellt durch Schaumspritzgießen mit Dekompressionshub
Roch, Alexander
Dissertation
Doctoral Thesis
2016 Magnesium dross and scrapquality
Rivas, Ana; Alcalde, Estíbaliz; San José, Ruth
Bericht
Report
2016 Magnetic fixation of dendron-functionalized iron oxide nanoparticles with palladium for continuous-flow suzuki reactions
Rehm, Thomas H.; Hofmann, Christian; Löb, Patrick; Shifrina, Z.B.; Morgan, David Gene; Bronstein, Lyudmila M.
Zeitschriftenaufsatz
Journal Article
2016 Manfred Held, a life devoted to explosives science. Editorial
Eisenreich, N.
Editorial
2016 Mass flow measurements on airbag inflators
Arce, Yurrita P.; Klahn, Thorsten; Deimling, Lukas; Roussel Garcia, Raquel; Schreiber, Achim
Konferenzbeitrag
Conference Paper
2016 Measuring where it counts
Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiss, Patrick; Baumann, Sascha
Zeitschriftenaufsatz
Journal Article
2016 Mechanical properties of unidirectional continuous carbon fiber reinforced sheet molding compounds
Trauth, A.; Bücheler, D.; Henning, F.; Weidenmann, K.A.
Konferenzbeitrag
Conference Paper
2016 Membrane electrode assemblies for water electrolysis using WO3-supported IrxRu1-xO2 catalysts
Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Methanol oxidation on PdRh/C electrocatalyst in alkaline media: Temperature and methanol concentration dependencies
Jurzinsky, T.; Kintzel, Birgit; Bär, Robin; Cremers, Carsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Methanol oxidation on Ru- or Ni-modified Pd-electrocatalysts in alkaline media: A comparative differential electrochemical mass spectrometry study
Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2016 Microreactors - A powerful tool to synthesize peroxycarboxylic esters
Illg, T.; Knorr, A.; Fritzsche, L.
Zeitschriftenaufsatz
Journal Article
2016 Mittendrin statt nur dabei
Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiss, Patrick; Baumann, Sascha
Zeitschriftenaufsatz
Journal Article
2016 Modeling size controlled nanoparticle precipitation with the co-solvency method by spinodal decomposition
Keßler, Simon; Schmid, Friederike; Drese, Klaus Stefan
Zeitschriftenaufsatz
Journal Article
2016 Modelling and simulation of the pultrusion process with closed injection and impregnation molds
Bezerra, Renato; Henning, Frank
Konferenzbeitrag
Conference Paper
2016 Modelling and validation of synthesis of poly lactic acid using an alternative energy source through a continuous reactive extrusion process
Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Blackburn, K.; Temple, C.; Bergmann, B.; Trinh, G.; David, C.
Zeitschriftenaufsatz
Journal Article
2016 Modelling of measurement data on the curing reaction of HTPB with isocyanate obtained by heat flow microcalorimetry and pressure decrease in closed vessel cells
Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter
Konferenzbeitrag
Conference Paper
2016 Molecular dynamics simulation of cohesion within solid propellants
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2016 Multiaxiale Hochleistungs-Gewebekonstruktionen und deren belastungskonforme Nutzung zu Leichtbau-Composites mit unterschiedlichen Matrices
Bericht
Report
2016 Multiscale dispersion-state characterization of nanocomposites using optical coherence tomography
Schneider, S.; Eppler, F.; Weber, M.; Olowojoba, G.; Weiss, Patrick; Hübner, Christof; Mikonsaari, Irma; Freude, W.; Koos, C.
Zeitschriftenaufsatz
Journal Article
2016 Nanometals: Synthesis and Application in Energetic Systems
Gromov, A.A.; Korotkikh, A.G.; Il'in, A.; DeLuca, L.T.; Arkhipov, V.A.; Monogarov, K.A.; Teipel, Ulrich
Aufsatz in Buch
Book Article
2016 Neuartige Innenraumbeschichtung zur nachhaltigen Verbesserung der Raumluft und des Raumklimas
Schmid, Helmut
Patent
2016 New energetic ingredients for solid rocket propulsion
DeLuca, L.T.; Palmucci, I.; Franzin, A.; Weiser, Volker; Gettwert, Volker; Wingborg, N.; Sjoblom, M.
Zeitschriftenaufsatz
Journal Article
2016 New Recovery Processes to Produce rere earth-Magnesium alloys of high Performance and low Cost (REMAGHIC)
Müller, Torsten; Salmon, Ana Rivas; Lagioia, Rocco
Konferenzbeitrag
Conference Paper
2016 Non-destructive ageing state determination of solid rocket motors charges
Tussiwand, G.; Eineder, L.; Mussbach, G.; Bohn, M.A.
Konferenzbeitrag
Conference Paper
2016 Normen in der Medizintechnik. Tl.1
Blab, Stephan; Gassner, Ulrich M.; Gerstenecker, Bernhard; Himmelreich, Ralf; Laurila-Dürsch, Janina; Möhlig-Zuttermeister, Heike; Neuder, Klaus; Prinz, Thorsten; Spitzenberger, Folker; Stetten, Felix von; Weber, Wolfgang; Zimmermann, Uwe
Buch
Book
2016 Novel low-cost selective pre-concentrators based on metal organic frameworks
Wilhelm, Isabel; Rieger, M.; Hürttlen, Jürgen; Wittek, Michael; Alépée, C.; Leidinger, M.; Sauerwald, T.
Zeitschriftenaufsatz
Journal Article
2016 Novel route to control the size, distribution and location of Ni nanoparticles in mesoporous silica for steam reforming of propylene glycol in microchannel reactor
Shanmugam, Vetrivel; Neuberg, Stefan; Zapf, Ralf; Hessel, Volker; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2016 Numerical simulation of advanced pultrusion processes with microwave heating
Barkanov, E.; Akishin, P.; Emmerich, R.; Graf, M.
Konferenzbeitrag
Conference Paper
2016 On the design of a comb-shaped, poly(phenylene oxide)-based anodic binder for anion-exchange membrane direct methanol fuel cell (AEM-DMFC)
Jurzinsky, Tilman; Bär, Robin; Heppe, Nils; Kübler, Markus; Jung, Florina; Cremers, Carsten; Tübke, Jens
Konferenzbeitrag
Conference Paper
2016 On the general water harvesting capability of metal-organic frameworks under well-defined climatic conditions
Trapani, F.; Polyzoidis, Angelos; Löbbecke, Stefan; Piscopo, Calogero
Zeitschriftenaufsatz
Journal Article
2016 On the influence of Ag on Pd-based electrocatalyst for methanol oxidation in alkaline media: A comparative differential electrochemical mass spectrometry study
Jurzinsky, T.; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 On-board fuel tailoring with a novel catalytic evaporator for HCCI combustion
Szolak, R.; Morales Wiemer, E.A.; Kraljevic, Ivica; Susdorf, A.; Karadeniz, H.; Epple, B.; Rümmele, F.; Schaadt, A.
Bericht
Report
2016 One step to comparable off-plane permeability results - an improved measuring method for transverse permeability and compaction behavior of textile fiber materials
Graupner, R.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2016 Online detection and categorisation of defects along carbon fibre production using a high resolution, high width line scan vision system
Geinitz, S.; Wedel, A.; Margraf, A.
Konferenzbeitrag
Conference Paper
2016 Operation of a small scale demonstration plant for Biodiesel synthesis under supercritical conditions
Schürer, Jochen; Bersch, Daniel; Schlicker, Sebastian; Thiele, Richard; Wiborg, Jens Ole; Ziogas, Athanassios; Zapf, Ralf; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2016 Optimization of PLA compounds using novel nucleating agents and plasticizers
Moser, K.; Schmitt, M.; Holzer, A.; Bergmann, B.; Diemert, J.; Elsner, P.
Konferenzbeitrag
Conference Paper
2016 Optimized profile extrusion processes for biopolymer blends
Moser, K.; Holzer, A.; Bergmann, B.; Diemert, J.
Konferenzbeitrag
Conference Paper
2016 Oxidation-responsive and "clickable" poly(ethylene glycol) via copolymerization of 2-(methylthio)ethyl glycidyl ether
Herzberger, Jana; Fischer, Karl; Leibig, Daniel; Bros, Matthias; Thiermann, Raphael; Frey, Holger
Zeitschriftenaufsatz
Journal Article
2016 Particle properties and crystal structure of ADN-prills
Heintz, Thomas; Herrmann, Michael; Leisinger, Karlfred; Reinhard, Werner
Konferenzbeitrag
Conference Paper
2016 PDF - Ein neuer Ansatz zur Strukturbestimmung energetischer Materialien
Herrmann, Michael; Kempa, Paul-Bernd
Konferenzbeitrag
Conference Paper
2016 Pentafluorophenyl ester-based polymersomes as nanosized drug-delivery vehicles
Scherer, Martin; Fischer, Karl; Depoix, Frank; Fritz, Thomas; Thiermann, Raphael; Mohr, Kirstin; Zentel, R.
Zeitschriftenaufsatz
Journal Article
2016 Performance evaluation of a proof-of-concept 70 W internal reforming methanol fuel cell system
Avgouropoulos, G.; Schlicker, Sebastian; Schelhaas, Karl-Peter; Papavasiliou, J.; Papadimitriou, K.D.; Theodorakopoulou, E.; Gourdoupi, N.; MacHocki, A.; Ioannides, T.; Kallitsis, J.K.; Kolb, Gunther; Neophytides, S.
Zeitschriftenaufsatz
Journal Article
2016 Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 °C in pure steam environment
Hovsepian, P.E.; Ehiasarian, A.P.; Purandare, Y.P.; Biswas, B.; Pérez, F.J.; Lasanta, M.I.; De Miguel, M.T.; Illana, A.; Juez-Lorenzo, Maria del Mar; Muelas, R.; Agüero, A.
Zeitschriftenaufsatz
Journal Article
2016 Photocatalysis with visible light - optimization and scale-up for the falling-film microreactor
Rehm, Thomas H.; Gros, Sylvain; Renken, Albert; Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2016 Photochemical fluorination reactions - A promising research field for continuous-flow synthesis
Rehm, Thomas H.
Zeitschriftenaufsatz
Journal Article
2016 Photonic contacting of gas-liquid phases in a falling film microreactor for continuous-flow photochemical catalysis with visible light
Rehm, Thomas H.; Gros, Sylvain; Löb, Patrick; Renken, Albert
Zeitschriftenaufsatz
Journal Article
2016 Poly(3-hydroxybutirate-co-3-hydroxyvalerate)-Polystyrene Hybrid Nanoparticles via Miniemulsion Polymerization
Leimann, F.V.; Costa, C.; Hess Gonçalves, O.; Musyanovych, A.; Landfester, K.; Sayer, C.; Hermes de Araújo, P.H.
Zeitschriftenaufsatz
Journal Article
2016 Poly(Epichlorohydrin-CO-1,2-Epoxyhexane) - a promising precursor for an energetic azido polymer for cast-cure processing
Hafner, Sven; Keicher, Thomas; Klapötke, Thomas M.
Konferenzbeitrag
Conference Paper
2016 Polyurethanes based on 2,2-Dinitropropane-1,3-diol and 2,2-bis(azidomethyl)propane-1,3-diol as potential energetic binders
Bellan, A.B.; Hafner, S.; Hartdegen, V.A.; Klapötke, T.M.
Zeitschriftenaufsatz
Journal Article
2016 Positive effect of the fluorine moiety on the oxygen storage capacity of UiO-66 metal-organic frameworks
Piscopo, Calogero; Trapani, F.; Polyzoidis, Angelos; Schwarzer, Maud; Pace, A.; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2016 Potential Energetic Plasticizers on the Basis of 2,2-Dinitropropane-1,3-diol and 2,2-Bis(azidomethyl)propane-1,3-diol
Hafner, S.; Hartdegen, V.A.; Hofmayer, M.S.; Klapötke, T.M.
Zeitschriftenaufsatz
Journal Article
2016 Preface
Zarko, V.E.; Gromov, A.A.
Aufsatz in Buch
Book Article
2016 Problematik der Übertragbarkeit bestehender Verfahren zur Kunststoff-Charakterisierung auf Kunststoffgemische
Forberger, Jens; Becker, R.W.
Zeitschriftenaufsatz
Journal Article
2016 Process and mold development of direct long fiber reinforced foam injection molding on the example of polycarbonate and glasfibers
Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A.
Konferenzbeitrag
Conference Paper
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2016 Process control for the continuous synthesis of quantum dots via inline process analytics
Schindler, Christoph; Sperling, Ralph A.
Zeitschriftenaufsatz
Journal Article
2016 Process design and life-cycle assessment of energy-efficient routes for the production of gasoline from biogas and pyrolysis oil
Sundaram, S.; Kolb, G.; Hessel, V.; Wang, Q.
Konferenzbeitrag
Conference Paper
2016 Process-parameter-dependent spring-in and warpage of locally reinforced ud tape laminates and V-shaped profiles
Hangs, Benjamin; Link, Tobias; Henning, Frank
Konferenzbeitrag
Conference Paper
2016 Proximal detection of traces of energetic materials with an eye-safe UV raman prototype developed for civil applications
Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, Wenka; Schnürer, Frank; Cassioli, L.; Grossi, S.; Murra, D.; Menicucci, I.; Angelini, F.; Palucci, A.
Zeitschriftenaufsatz
Journal Article
2016 Radiation-grafted materials for energy conversion and energy storage applications
Nasef, M.M.; Gürsel, S.A.; Karabelli, D.; Güven, O.
Zeitschriftenaufsatz
Journal Article
2016 Recent advances and applications of external Cavity-QCLs towards hyperspectral imaging for standoff detection and real-time spectroscopic sensing of chemicals
Ostendorf, R.; Butschek, L.; Hugger, S.; Fuchs, F.; Yang, Q.; Jarvis, J.; Schilling, C.; Rattunde, M.; Merten, A.; Grahmann, J.; Boskovic, D.; Tybussek, T.; Rieblinger, K.; Wagner, J.
Zeitschriftenaufsatz
Journal Article
2016 Recyclable epoxy system for HP-RTM application
Pastine, S.; Meirson, G.; Swentek, I.; Nasrullah, M.; Kosinski, S.; Banatao, R.; Ugresic, V.; Henning, F.
Konferenzbeitrag
Conference Paper
2016 Recycling von Textilien aus carbonfaserverstärkten Kunststoff-Bauteilen und deren Produktion
Seiler, Elisa; Stark, A.; Forberger, Jens
Zeitschriftenaufsatz
Journal Article
2016 Recyclinggerechte Produktentwicklung in der Luftfahrt am Beispiel Fluggastsitz
Wimmer, Ann-Kathrin
Dissertation
Doctoral Thesis
2016 Review: Microstructured reactors as efficient tool for the operation of selective oxidation reactions
Pennemann, Helmut; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2016 Scenario-based comparative assessment of potential future electricity systems - A new methodological approach using Germany in 2050 as an example
Lunz, Benedikt; Stöcker, Philipp; Eckstein, Sascha; Nebel, Arjuna; Samadi, Sascha; Erlach, Berit; Fischedick, Manfred; Elsner, Peter; Sauer, Dirk Uwe
Zeitschriftenaufsatz
Journal Article
2016 Schnelle Prozesse - Mikrowellen in der Verfahrenstechnik
Emmerich, Rudolf
Zeitschriftenaufsatz
Journal Article
2016 Sensitivity of material properties on wrinkling behavior and fiber reorientation of thermoplastic UD-Tape laminates during forming analyzed by Finite Element forming simulation
Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Frank
Konferenzbeitrag
Conference Paper
2016 Sensor zum Erfassen einer Flussigkeit in einem Fluidkanal
Hoffmann, Almuth; Bassler, Michael; Potje-Kamloth, Karin; Welzel, Knut; Besold, Matthias
Patent
2016 Shrinking core model to describe metal particle oxidation from thermal analysis data
Kelzenberg, Stefan; Eisenreich, N.; Knapp, Sebastian; Weiser, Volker
Zeitschriftenaufsatz
Journal Article
2016 Simulation of closed vessel combustion using the 2D ICT-Cellular-Combustion-Algorithm
Wurster, S.; Fischer, T.S.
Konferenzbeitrag
Conference Paper
2016 Simulation of double base propellant combustion using the ICT-cellular-combustion-algorithm
Wurster, Sebastian
Konferenzbeitrag
Conference Paper
2016 So klein und doch so nah. Patientennahe Labordiagnostik mithilfe mikrofluidischer Systeme
Schunck, Tobias; Winkler, Antonia
Zeitschriftenaufsatz
Journal Article
2016 Spatiotemporal neuromodulation therapies engaging muscle synergies improve motor control after spinal cord injury
Wenger, N.; Moraud, E.M.; Gandar, J.; Musienko, P.; Capogrosso, M.; Baud, L.; Goff, C.G. le; Barraud, Q.; Pavlova, N.; Dominici, N.; Minev, I.R.; Asboth, L.; Hirsch, A.; Duis, S.; Kreider, J.; Mortera, A.; Haverbeck, O.; Kraus, S.; Schmitz, F.; DiGiovanna, J.; Brand, R. van den; Bloch, J.; Detemple, P.; Lacour, S.P.; Bezard, E.; Micera, S.; Courtine, G.
Zeitschriftenaufsatz
Journal Article
2016 Status on root cause investigation on airbag inflator failure mode
Neutz, J.; Ebeling, H.; Yoshimura, K.
Zeitschriftenaufsatz
Journal Article
2016 Streulichtanalyse zur Prüfung auf Nanopartikel-Fraktionen
Frese, Ines; Bantz, Christoph; Nolde, J.; Reisinger, M.; Heinemann, M.; Affolter, O.
Zeitschriftenaufsatz
Journal Article
2016 Study of the long-term operation of a vanadium/oxygen fuel cell
Noack, Jens; Cognard, G.; Oral, M.; Küttinger, M.; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren
Manvi, P.K.; Seide, G.; Gries, T.; Buczko, Aleksandra; Moser, Kevin
Zeitschriftenaufsatz
Journal Article
2016 Synthese und Charakterisierung von energetischen ionischen Liquiden auf Basis von 4-Amino-1,2,4-triazol
Schaller, Uwe
Dissertation
Doctoral Thesis
2016 Techno-economic modeling and analysis of redox flow battery systems
Noack, Jens; Wietschel, Lars; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Temperature and spatially resolved investigations of the microstructure of gun propellants by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Fietzek, Harald; Böhnlein-Mauß, Jutta; Kaiser, M.
Konferenzbeitrag
Conference Paper
2016 Temperaturverhalten von Ammoniumdinitramid und Wechselwirkungen mit Additiven für Festtreibstoffe
Herrmann, Michael; Kempa, Paul-Bernd; Förter-Barth, Ulrich; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2016 Test facility for investigation of impact-initiated bimetallic compounds
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas; Schuch, Michael
Konferenzbeitrag
Conference Paper
2016 The efficient route to tailored Organo Sheets
Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin
Zeitschriftenaufsatz
Journal Article
2016 The influence of Al4C3 nanoparticles on the physical and mechanical properties of metal matrix composites at high temperatures
Vorozhtsov, S.; Kolarik, Vladislav; Promakhov, V.; Zhukov, I.; Vorozhtsov, A.; Kuchenreuther-Hummel, Veronica
Zeitschriftenaufsatz
Journal Article
2016 The influence of mass-transport conditions on the ethanol oxidation reaction (EOR) mechanism of Pt/C electrocatalysts
Bach Delpeuch, A.; Jacquot, M.; Chatenet, M.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2016 The interface of CFRP face sheets and aluminum foam cores in hybrid sandwich panels manufactured by a PUR spraying process
Rupp, Peter; Wafzig, Florian; Weidenmann, Kay André
Konferenzbeitrag
Conference Paper
2016 The Probable Mechanism of Foreign Metals Formations in Particles Formed by Plasma Electrolysis of Water Solutions
Gromov, A.; Teipel, Ulrich
Konferenzbeitrag
Conference Paper
2016 Thermogravimetric analysis of molybdenum oxide (MoO3) decomposition
Knapp, Sebastian; Eisenreich, Norbert; Kuchenreuther-Hummel, Veronika; Kelzenberg, Stefan; Koleczko, Andreas; Schuppler, Heike
Konferenzbeitrag
Conference Paper
2016 Towards an all-vanadium redox-flow battery electrolyte: electrooxidation of V(III) in V(IV)/V(III) redox couple
Roznyatovskaya, Nataliya; Noack, Jens; Fühl, Matthias; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2016 Tracer gas experiments in subways using an integrated measuring and analysis system for sulfur hexafluoride
Brüne, M.; Spiegel, J.; Potje-Kamloth, Karin; Stein, C.; Pflitsch, A.
Zeitschriftenaufsatz
Journal Article
2016 Tuning the surface of nanoparticles: Impact of poly(2-ethyl-2-oxazoline) on protein adsorption in serum and cellular uptake
Koshkina, Olga; Westmeier, Dana; Lang, Thomas; Bantz, Christoph; Hahlbrock, Angelina; Würth, Christian; Resch-Genger, Ute; Braun, Ulrike; Weise, Christoph; Thiermann, Raphael; Eravci, Murat; Mohr, Benjamin; Schlaad, Helmut; Stauber, Roland H.; Docter, Dominic; Bertin, Annabelle; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2016 Turning trees into foam
Schneider, A.; Rapp, F.; Iglhaut, K.; Michel, A.
Zeitschriftenaufsatz
Journal Article
2016 Untersuchungen zur Aminierung von Alkoholen mit einer DRIFTS-Zelle
Rosemeier, Michael
Bachelor Thesis
2016 Using Thermogravimetric Analysis to Determine Carbon Fiber Weight Percentage of Fiber-Reinforced Plastics
Bücheler, D.; Kaiser, Anja; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2016 Utilization of recycled wood in biorefineries: Preliminary results of steam explosion and ethanol/water organosolv pulping without a catalyst
Lesar, Bostjan; Humar, Miha; Hora, Guido; Hachmeister, Philipp; Schmiedl, Detlef; Pindel, Elvira; Siika-aho, Matti; Liitiä, Tiina
Zeitschriftenaufsatz
Journal Article
2016 Verbundvorhaben: Entwicklung einer kompakten Kleinanlage zur Erzeugung von Biodiesel aus Rapsöl unter überkritischen Bedingungen
Schürer, Jochen; Bersch, Daniel; Ziogas, Athanassios; Kolb, Gunther; Düngenheim, Karl
Bericht
Report
2016 Verfahren und Vorrichtung zur Herstellung von mit Einlegern versehenen Polymer-Formteilen
Bücheler, David
Patent
2016 Verfahren zur Detektion von strahlungsemittierenden Partikeln
Quint, Stephan; Levanon, Nadav; Baßler, Michael; Sommer, Christian
Patent
2016 Verfahren zur Regeneration der Elektrolytlösung eines Redox-Flow-Akkumulators
Noack, Jens; Fischer, Peter; Tübke, Jens; Pinkwart, Karsten
Patent
2016 Verfahren zur Versorgung eines elektische Energie umsetzenden Implantates mit elektrischer Energie
Schmid, Helmut; Eckl, Wilhelm
Patent
2016 Vom Mikro-Labor zum Mini-Menschen
Drese, Klaus Stefan
Zeitschriftenaufsatz
Journal Article
2016 Von der Idee zur Innovation
Bericht
Report
2016 Vorausschauende, individuelle Therapie möglich
Winkler, Antonia
Zeitschriftenaufsatz
Journal Article
2016 Vorrichtung zur direkten und reversiblen Umwandlung thermischer Energie in elektrische Energie
Schmid, Helmut; Koleczko, Andreas
Patent
2016 Vorrichtung zur Umwandlung der Energie elektromagnetischer Strahlung in elektrische Energie
Schmid, Helmut; Walschburger, Erik; Mehring, Günter
Patent
2016 Vorrichtung, Zytometer, Verfahren und Computerprogramm zum Bereitstellen von Informationen über zumindest eine Sequenz
Baßler, Michael; Quint, Stephan
Patent
2016 Welche Eigenschaften von Nanopartikeln bestimmen deren Aufnahme in Zellen?
Schunck, Tobias; Onyema, Helen; Zupke, Oliver; Musyanovych, Anna
Zeitschriftenaufsatz
Journal Article
2016 Zählen, Sortieren und Charakterisieren. Partikel in laminaren Mikroströmungen
Alebrand, Sabine; Drese, Klaus Stefan; Baßler, Michael; Schönfeld, Friedhelm
Zeitschriftenaufsatz
Journal Article
2016 Ökoeffizienz-Analyse zur Bewertung unterschiedlicher CFK-Recyclingtechnologien
Dieterle, Michael
Master Thesis
2016 Überprüfung der Kalibrierung von Manganin-Stoßdrucksonden im Druckbereich von 150 bis 275 kbar
Leibold, Marvin
Bachelor Thesis
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2015

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2015 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2015 A 5 kwel propylene glycol microchannel fuel processor as hydrogen source for fuel cells
Schürer, Jochen; Tiemann, David; Ziogas, Athanassios; Kolb, Gunther
Konferenzbeitrag
Conference Paper
2015 A new eye-safe UV Raman spectrometer for the remote detection of energetic materials in fingerprint concentrations: Characterization by PCA and ROC analyzes
Almaviva, S.; Chirico, R.; Nuvoli, M.; Palucci, A.; Schnürer, Frank; Schweikert, Wenka
Zeitschriftenaufsatz
Journal Article
2015 A new mixing technology for plastic bonded explosives
Gerber, Peter; Happ, Andreas
Konferenzbeitrag
Conference Paper
2015 A novel low-cost pre-concentrator concept to boost sensitivity and selectivity of gas sensor systems
Schütze, A.; Leidinger, M.; Schmitt, B.; Sauerwald, T.; Rieger, M.; Alepee, C.
Konferenzbeitrag
Conference Paper
2015 A vanadium redox flow battery for uninterruptible power supply applications
Buczkowski, T.; Noack, J.; Fischer, P.; Tübke, J.; Pinkwart, K.
Konferenzbeitrag
Conference Paper
2015 Active mixing inside double emulsion segments in continuous flow
Misuk, Viktor; Mai, Andreas; Zhao, Yunnig; Heinrich, Julian; Rauber, Daniel; Giannopoulos, Konstantinos; Löwe, Holger
Zeitschriftenaufsatz
Journal Article
2015 ADN and AN solutions in hydrogen peroxide as green oxidiser for hypergolic propellants
Weiser, Volker; Hürttlen, Jürgen; Schaller, Uwe
Vortrag
Presentation
2015 Aging of explosive crystals investigated by x-ray diffraction
Herrmann, M.; Bohn M.A.
Konferenzbeitrag
Conference Paper
2015 Aircraft Metals Recycling - Process, Challenges and Opportunities
Müller, Torsten
Vortrag
Presentation
2015 Alkaline direct alcohol fuel cells
Cremers, C.; Jurzinsky, T.; Jung, F.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2015 An holistic evaluation of the state of the art and future developments on non-lethal microwave systems
Valente, F.; Paulissen, P.; Neutz, J.; Urban, H.; Roland-Price, A.
Konferenzbeitrag
Conference Paper
2015 Analyse und Bewertung des Verzugs von lokal verstärkten Gelegelaminaten aus CP/PPS
Link, Tobias
Master Thesis
2015 Analysis of pure tar substances (polycyclic aromatic hydeocarbons) in the gas stream using ultraviolet visible (UV-Vis) spectroscopy and multivariate cure resolution (MCR)
Weide, Tobias; Guschin, Viktor; Becker, Wolfgang; Kölle, Sabine; Maier, Simon; Seidelt, Stephan
Zeitschriftenaufsatz
Journal Article
2015 Anion intercalation into graphite from a sodium-containing electrolyte
Bordet, F.; Ahlbrecht, Katharina; Tübke, Jens; Ufheil, J.; Hoes, T.; Oetken, M.; Holzapfel, Michael
Zeitschriftenaufsatz
Journal Article
2015 Application of thermochemical sorption material to control the moisture of ammunition
Guschin, Viktor; Knapp, Sebastian; Wehner, Harald; Hakspiel, Fabian; Pappert, Sandra; Eckl, Wilhelm
Konferenzbeitrag
Conference Paper
2015 Assessment of description quality of models by information theoretical criteria based on Akaike and Schwarz-Bayes applied with stability data of energetic materials
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Automated and continuous production of microstructured metallic plates via cold embossing
Wiborg, Jens Ole; O'Connell, Martin; Thiele, Richard; Wichert, Martin; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2015 Awakol - Entwicklung eines Brennstoffzellensystems kleiner Leistung auf der Basis der wasserdampffreien Konvertierung von Flüssiggas
Pennemann, Helmut; Kolb, Gunther
Bericht
Report
2015 Battery
Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas
Patent
2015 BIOGO: Contributing to the transformation of the petrochemical industry through advances in nanocatalysts and reactor design
Newton, Hannah; Wang, Qi; Sundaram, Smitha; Veen, Andre van; Kiesewalter, Stefan; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2015 Bleed-to-read disposable microsystems for the genetic and serological analysis of celiac disease markers with amperometric detection
Ortiz, Mayreli; Joda, Hamdi; Höth, Julian; Beni, Valerio; Katakis, Ioanis; Klemm, Richard; Lind, Kristina; O'Sullivan, Ciara K.; Fragoso, Alex
Zeitschriftenaufsatz
Journal Article
2015 Catalytic steam reforming of polyalcohols in microchannel reactors - hydrogen production from cellulosic biomass
Kolb, Gunther; Schürer, Jochen; Tiemann, David; Ziogas, Athanassios
Meeting Abstract
2015 Cell size discrimination based on the measurement of the equilibrium velocity in rectangular microchannels
Schott, Lisa; Sommer, Christian; Wittek, Joern; Myagmar, Khaliun; Walther, Thomas; Baßler, Michael
Zeitschriftenaufsatz
Journal Article
2015 Characterization of a fuel cell stack for use in material handling applications
Keller, S.; Cremers, Carsten; Niedergesäß, A.; Özel, Tansu
Konferenzbeitrag
Conference Paper
2015 Characterization of butacene based composite propellants by loss factor curves determined with DMA
Seyidoglu, Tijen; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Characterization of complexly warped components made from locally reinforced UD-tape laminates
Hangs, B.; Link, T.; Henning, F.
Konferenzbeitrag
Conference Paper
2015 Characterization of sibex in 1,5m³ ICT detonation tank
Materna, Miriam; Keßler, Armin
Konferenzbeitrag
Conference Paper
2015 Charakterisierung von Metall-organischen Gerüststrukturen (MOF) mit Hilfe der Röntgenbeugung
Herrmann, M.; Kempa, P.B.; Altenburg, T.; Polyzoidis, A.; Piscopo, C.G.; Löbbecke, S.
Konferenzbeitrag
Conference Paper
2015 Clinical performance of a low cost near infrared sensor for continuous glucose monitoring applied with subcutaneous microdialysis
Ben Mohammadi, Lhoucine; Klotzbücher, Thomas; Sigloch, Susanne; Welzel, Knut; Göddel, Michael; Pieper, T.R.; Schaupp, Lukas
Zeitschriftenaufsatz
Journal Article
2015 Cohesion properties in PBX and composite propellants - computational details
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Cohesion properties in PBX and composite propellants - computational results and experimental aspects
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Combustion Synthesis of AlN (Al3O3N), BN, ZrN, and TiN in Air and Ceramic Application
Gromov, A.A.; Maggi, F.; Malikova, E.V.; Pautova, J.I.; Il'in, A.P.; Popenko, E.M.; Sergienko, A.V.; Korotkikh, A.G.; Teipel, Ulrich
Aufsatz in Buch
Book Article
2015 ContiNMR: Monitoring and controlling continuous synthesis reactors with Benchtop NMR
Riegel, Susanne; Rehm, Thomas H.
Konferenzbeitrag
Conference Paper
2015 Crosslinking of poly(vinylene fluoride) separators by gamma-irradiation for electrochemical high power charge applications
Karabelli, D.; Leprêtre, J.-C.; Dumas, L.; Rouif, S.; Portinha, D.; Fleury, E.; Sanchez, J.-Y.
Zeitschriftenaufsatz
Journal Article
2015 D 6-2 REMAGHIC Website
Rivas, Ana
Bericht
Report
2015 Damage behaviour of fibre reinforced materials induced by high temperature oxidation for optimisation of thermal recycling routes
Manis, Frank; Wölling, Jakob; Drechsler, Klaus
Konferenzbeitrag
Conference Paper
2015 Deflagration-detonation experiments of sensitized mixtures of ammonium or urea nitrates and an energetic thermoplastic elastomer
Quaresma, J.; Keicher, Thomas; Pineiro, M.; Deimling, Lukas; Campos, Jose; Krause, Horst
Konferenzbeitrag
Conference Paper
2015 Detection and modelling of thermal and rheological transitions of a 2-step-curing thermoset using dielectric and standard measuring techniques
Chaloupka, A.; Bezerra, R.; Madaksira, V.; Taha, I.; Rudolph, N.M.
Konferenzbeitrag
Conference Paper
2015 Development of a novel experimental DEMS set-up for electrocatalyst characterization under working conditions of high temperature polymer electrolyte fuel cells
Niether, C.; Rau, M.S.; Cremers, Carsten; Jones, D.J.; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2015 Development of a pure oxygen fuel cell system for an autonomous underwater vehicle with focus on fuel starvation due to inert gas accumulation on the anode
Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2015 Development of an innovative heat storage system for combined heat and power plants (CHP)
Merkel, S.; Epple, Boris; Simsek, A.; Kollmeier, H.P.; Eckl, W.; Pappert, Sandra; Elsner, Peter
Konferenzbeitrag
Conference Paper
2015 Development of anodic materials for HT-PEMFCs with high tolerance to H2S
Rau, M.; Cremers, Carsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2015 Development of materials for anion-exchange membrane direct alcohol fuel cells
Jurzinsky, T.; Cremers, Carsten; Jung, F.; Pinkwart, Karsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2015 Die Chemie der Redox-Flow-Batterien
Noack, Jens; Roznyatovskaya, Nataliya; Herr, Tatjana; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2015 Die Gleichgewichtsgeschwindigkeit in Mikrokanälen für die Größenmessung von Partikeln: Welche Partikel sind am schnellsten?
Baßler, Michael; Sommer, Christian; Böttger, Tim; Wittek, Jörn; Drese, Klaus Stefan; Alebrand, Sabine; Schönfeld, Friedhelm
Konferenzbeitrag
Conference Paper
2015 Die nächste Generation des Point-of-Care-Testing - Neue Technologien und Erfolgsfaktoren
Drese, Klaus Stefan; Himmelreich, Ralf
Konferenzbeitrag
Conference Paper
2015 Direct generation of titanium dioxide nanoparticles dispersion under supercritical conditions for photocatalytic active thermoplastic surfaces for microbiological inactivation
Zydziak, Nicolas; Ambrosio Zanin, Maria-Helena; Trick, Iris; Hübner, Christof
Zeitschriftenaufsatz
Journal Article
2015 Dithionite/air direct ion liquid fuel cell
Noack, Jens; Tübke, Jens; Pinkwart, Karsten
Zeitschriftenaufsatz
Journal Article
2015 Dose response relations of PP
Reichert, Thomas; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Schönlein, Artur; Geburtig, A.; Zäh, Matthias
Konferenzbeitrag
Conference Paper
2015 Effect of curing agents and plasticizers on the loss factor curves of HTPB-binders quantified by modelling
Seyidoglu, Tijen; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Effect of surface treatment for metallic z-reinforcements on interlaminar fracture toughness of CFRP/CFRP joints
Jürgens, M.; Kurtovic, A.; Mertens, T.; Nogueira, A.C.; Lang, H.; Kolb, M.; Strobach, P.; Hombergsmeier, E.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2015 Effects of radiation on the flame front of hydrogen air explosions
Keßler, Armin; Wassmer, Conrad; Knapp, Sebastian; Weiser, Volker; Sachsenheimer, K.; Raab, Angelika; Langer, Gesa; Eisenreich, Norbert
Vortrag
Presentation
2015 Electrical buffer storage for energy harvesting
Hahn, R.; Möller, K.-C.
Aufsatz in Buch
Book Article
2015 Electrocatalyst for direct alcohol fuel cells
Cremers, Carsten; Jurzinsky, Tilman; Bach Delpeuch, A.; Niether, C.; Jung, Florina; Pinkwart, Karsten; Tübke, Jens
Konferenzbeitrag
Conference Paper
2015 Electrochemiluminescence DNA sensor array for multiplex detection of biowarfare agents
Spehar-Délèze, Anna-Maria; Gransee, Rainer; Martinez-Montequin, Sergio; Bejarano-Nosas, Diego; Dulay, Samuel; Julich, Sandra; Tomaso, Herbert; O'Sullivan, Ciara K.
Zeitschriftenaufsatz
Journal Article
2015 Energetic materials - performance, safety and system applications
Tagungsband
Conference Proceeding
2015 Evaluation of the effect of plasticizers on the DMA loss factor, the thermal and mechanical properties of Desmophen® 2200 based elastomers used for composite propellants
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 EXPEDIA - a new EU project aiming to reduce threats from homemade explosives
Keicher, Thomas; Hafner, Sven; Krause, Horst; Östmark, Henric; Kölhed, Malin; Krumlinde, Patrik
Konferenzbeitrag
Conference Paper
2015 Experimental and theoretical comparison of a systematic variety of thermite compositions
Weiser, Volker; Roth, Evelin; Kelzenberg, Stefan; Becker, Wolfgang; Sachsenheimer, K.
Konferenzbeitrag
Conference Paper
2015 Experimental determination of heat-dynamics of a zeolite bedding
Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm
Konferenzbeitrag
Conference Paper
2015 Experimental determination of heat-dynamics of a zeolite bedding in a plug flow reactor
Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm
Konferenzbeitrag
Conference Paper
2015 Experimentelle Charakterisierung des Einflusses verschiedener Bindersysteme auf die Permeabilität des Preforms bei der RTM-Fertigung
Magagnato, D.; Thoma, B.; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2015 Fluorenylmethoxycarbonyl-protected O-Glycosyl-N-methyl amino acids: Building blocks for the synthesis of conformationally tuned glycopeptide antigens
Buba, Annette E.; Löwe, Holger; Kunz, Horst
Zeitschriftenaufsatz
Journal Article
2015 Fraunhofer ICT-IMM at Biotechnica 2015
Baßler, Michael
Video
2015 Fraunhofer, DLR project demonstrates power for airliner galleys
Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2015 Fraunhofer-Institut für Chemische Technologie, Institutsteil ICT-IMM. Jahresbericht 2014
Jahresbericht
Annual Report
2015 Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2014/2015
Jahresbericht
Annual Report
2015 Frothing of cavity structures in coating layers to reduce specific weight
Stocker, Thomas; Eisenblätter, J.; Gericke, Ralf
Zeitschriftenaufsatz
Journal Article
2015 FRP parts for internal combustion engines
Berg, Lars-Fredrik
Zeitschriftenaufsatz
Journal Article
2015 Fuel cells as range extender or auxiliary power unit for electric vehicles
Cremers, C.; Hitscherich, M.; Ries, P.; Niedergesäß, A.; Rau, M.S.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2015 Germany gets on Eco Design for aircraft end-of-life strategy
Wimmer, A.-K.
Konferenzbeitrag
Conference Paper
2015 Gewebe mit Polymerschicht
Schmid, Helmut; Eisenreich, Norbert; Homa, Peter
Patent
2015 Glucosesensor
Frese, Ines; Klotzbücher, Thomas
Patent
2015 Going mobile with micro
Lang, Jürgen; Löb, Patrick; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2015 Green catalysis by nanoparticulate catalysts developed for flow processing? Case study of glucose hydrogenation
Gericke, Dörthe; Ott, Denise; Matveeva, Valentina G.; Sulman, Esther; Aho, Atte; Murzin, Dmitry Yu; Roggan, Stefan; Danilova, Lyudmila; Hessel, Volker; Löb, Patrick; Kralisch, Dana
Zeitschriftenaufsatz
Journal Article
2015 Herstellung von Aminen aus Alkoholen mittels heterogener Katalysatoren
Späth, Sarah
Master Thesis
2015 High energy density amorphous silicon anodes for lithium ion batteries deposited by DC sputtering
Farmakis, F.; Elmasides, C.; Fanz, Patrik; Hagen, Markus; Georgoulas, N.
Zeitschriftenaufsatz
Journal Article
2015 High-pressure resin injection - Key technology for large-scale production
Graf, M.; Chaudhari, R.
Konferenzbeitrag
Conference Paper
2015 High-temperature polymer electrolyte membrane based direct ethanol fuel cell
Cremers, C.; Niether, C.; Delpeuch, A.B.; Ries, P.; Jung, F.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2015 High-throughput single-cell labeling (Hi-SCL) for RNA-Seq using drop-based microfluidics
Rotem, Assaf; Ram, Oren; Shoresh, Noam; Sperling, Ralph A.; Schnall-Levin, Michael; Zhang, Huidan; Basu, Anindita; Bernstein, Bradley E.; Weitz, David A.
Zeitschriftenaufsatz
Journal Article
2015 Highly active carbon supported palladium-rhodium PdXRh/C catalysts for methanol electrooxidation in alkaline media and their performance in anion exchange direct methanol fuel cells (AEM-DMFCs)
Jurzinsky, Tilman; Bär, Robin; Cremers, Carsten; Tübke, Jens; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2015 Hot-Spot modelling of propellant regression. Part 2
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker
Konferenzbeitrag
Conference Paper
2015 Hot-spot modelling of thermite mixtures
Knapp, Sebastian; Weiser, V.; Kelzenberg, S.; Roth, E.; Eckl, W.
Konferenzbeitrag
Conference Paper
2015 Hyperspectral imaging of pyrotechnical decoys
Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas
Konferenzbeitrag
Conference Paper
2015 Impact of HP-RTM process parameters on mechanical properties using epoxy and polyurethane
Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F.
Konferenzbeitrag
Conference Paper
2015 Impact of smoothing on parameter estimation in quantitative DNA amplification experiments
Spiess, Andrej-Nikolai; Deutschmann, Claudia; Burdukiewic, Michal; Himmelreich, Ralf; Klat, Katharina; Schierack, Peter; Rödiger, Stefan
Zeitschriftenaufsatz
Journal Article
2015 Improvement of polymer films in terms of barrier properties using nanotechnology
Schmid, Helmut
Konferenzbeitrag
Conference Paper
2015 Influence of different plasticizers on the glass transition temperature of mixtures with energetic thermoplastic elastomers
Böhnlein-Mauß, Jutta; Mitró, Daniel; Helfrich, Mathias
Konferenzbeitrag
Conference Paper
2015 Influence of H- and OH-adsorbates on the ethanol oxidation reaction
Delpeuch, A.B.; Chatenet, M.; Rau, M.S.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2015 Influence of surface treatment and design of 3D-reinforcements on delamination resistance & mechanical properties of CFRP/CFRP joints under static & fatigue loading
Juergens, M.; Kurtovic, A.; Mertens, T.; Kolb, M.; Greitemeier, D.; Lang, H.; Hombergsmeier, E.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2015 Influence of the temperature for the ethanol oxidation reaction (EOR) on Pt/C, Pt-Rh/C and Pt-Rh-SnO2/C
Delpeuch, A.B.; Asset, T.; Chatenet, M.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2015 Inhibitors for non-lethal anti-material applications
Armbrust, Torsten; Rozincsak, Linda; Klemenz, Melanie; Hummel, Marc; Bernewitz, Johanna; Neutz, Jochen
Konferenzbeitrag
Conference Paper
2015 Insensitive, high-performance explosives
Herrmann, Michael
Aufsatz in Buch
Book Article
2015 Interaction energies between binder polymers and crystalline surfaces in composite materials determined by solution microcalorimetry and computer simulation
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Investigation of rotating pyrotechnical decoy in realistic air flow with authentic ignition
Deimling, Lukas; Billeb, G.; Klahn, Thorsten; Schreiber, Achim; Zilly, Andreas
Konferenzbeitrag
Conference Paper
2015 Investigations on injection molded, glass-fiber reinforced polyamide 6 integral foams using breathing mold technology
Roch, A.; Kehret, L.; Huber, T.; Henning, F.; Elsner, P.
Konferenzbeitrag
Conference Paper
2015 IP-Schutzart IPX9 / IPX9K
Rühle, Steffen; Cäsar, Joachim
Konferenzbeitrag
Conference Paper
2015 Jede Zelle einzeln analysieren
Baßler, Michael
Zeitschriftenaufsatz
Journal Article
2015 Kombination von turbidimetrischer Methode mit Verfahren der 369 multivariaten Datenanalyse zur Charakterisierung von Nanokompositen
Guschin, V.; Becker, W.; Mikonsaari, I.; Weiss, P.; Günthner, C.; Eickershoff, B.; Kölle, S.; Maier, S.; Llorens-Chiralt, R.
Konferenzbeitrag
Conference Paper
2015 Lithium-sulfur cells: The Gap between the state-of-the-art and the requirements for high energy battery cells
Hagen, Markus; Hanselmann, Dominik; Ahlbrecht, Katharina; Maça, Rudi; Gerber, D.; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2015 Localisation of IED manufacturing facilities by detection of explosives in sewage water
Schnürer, Frank; Heil, Moritz; Rieger, Max; Eberhardt, Angelika; Aniol, Jasmin; Krause, Horst
Konferenzbeitrag
Conference Paper
2015 Low temperature, high energy density non-aqueous Redox Flow Battery
Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P.
Konferenzbeitrag
Conference Paper
2015 Machbarkeitsstudie zur Materialsubsitution von Stahl und Aluminium durch Sheet Moulding Compound (SMC) am Beispiel eines Automobilkarosseriebauteils
List, Jonas
Master Thesis
2015 Magnetische Speicher: Schalten mit Licht
Alebrand, Sabine; Cinchetti, Mirko; Aeschlimann, Martin
Zeitschriftenaufsatz
Journal Article
2015 MAI ENVIRO. Vorstudie zur Lebenszyklusanalyse mit ökobilanzieller Bewertung relevanter Fertigungsprozessketten für CFK-Strukturen
Hohmann, Andrea; Schwab, Bernhard; Wehner, Daniel; Albrecht, Stefan; Ilg, Robert; Schüppel, Denny; Reden, Tjark von
Studie
Study
2015 Manufacturing of complex shape composite parts through the combination of pull-braiding and blow moulding
Bezerra, R.; Wilhelm, F.; Strauß, S.; Ahlborn, H.
Konferenzbeitrag
Conference Paper
2015 Metal Organic Frameworks (MOFs): Time for a breakthrough in material supply
Polyzoidis, Angelos; Schwarzer, Maud; Löbbecke, Stefan; Piscopo, Calogero
Zeitschriftenaufsatz
Journal Article
2015 Metal organic frameworks as selective preconcentrator material for gas-phase sensing
Rieger, Max; Heil, Moritz; Hürttlen, Jürgen; Schnürer, Frank; Bunte, Gudrun; Krause, Horst
Konferenzbeitrag
Conference Paper
2015 Methane reforming in a small-scaled plasma reactor - industrial application of a plasma process from the viewpoint of the environmental profile
Wang, Qi; Spasova, Berta; Hessel, Volker; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2015 Methodische Umsetzung und Bewertung eines neuartigen Prozesses zur lokalen und automatisierten Fixierung von textilen Preformlingen
Thoma, Bernd
Dissertation
Doctoral Thesis
2015 Micro-structured reactors for fuel processing
Kolb, Gunther
Konferenzbeitrag
Conference Paper
2015 Microstructure of energetic thermoplastic elastomers investigated by means of x-ray diffraction
Herrmann, Michael; Förter-Barth, Ulrich; Keicher, Thomas
Konferenzbeitrag
Conference Paper
2015 Microstructure of the HMX-Based PBX KS32 after Mechanical Loading
Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred; Krause, Horst; Koch, Michael; Werner, Arnold
Zeitschriftenaufsatz
Journal Article
2015 Miniaturisierte Systeme für das All und die Praxis. Teil I: Tomaten im Weltall ... oder vom Traum des Menschen, das All zu besiedeln
Winkler, Antonia; Baßler, Michael; Alebrand, Sabine
Zeitschriftenaufsatz
Journal Article
2015 Model-based development of a holistic thermal management system for an electric car with a high temperature fuel cell range extender
Fischer, Torben; Götz, Florian; Berg, Lars Fredrik; Kollmeier, Hans-Peter; Gauterin, Frank
Konferenzbeitrag
Conference Paper
2015 Modelling of loss factor curves obtained by Torsion-DMA of HTPB and GAP based binders manufactured with different curing agents and plasticizers
Seyidoglu, Tijen; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Modelling of loss factors of elastomer binders of high explosive charges and composite rocket propellants to separate binder fractions with different molecular mobility used to follow ageing
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Modified primers for rapid and direct electrochemical analysis of coeliac disease associated HLA alleles
Joda, Hamdi; Beni, Valerio; Willems, Andreas; Frank, Rainer; Höth, Julian; Lind, Kristina; Strömbom, Linda; Katakis, Ioanis; O'Sullivan, Ciara K.
Zeitschriftenaufsatz
Journal Article
2015 Modular micro-structured reactors for pilot- and production scale chemistry
Ghaini, Aras; Balon-Burger, Monika; Bogdan, Anca; Krtschil, Ulrich; Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2015 Modulares Projekt- und Alliance-Management-Tool für die pharmazeutische und diagnostische Entwicklung
Hainel, Frank; Kiesewalter, Stefan
Bericht
Report
2015 Molding tools without sealing gaskets
Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2015 Monitoring of bond-line stresses in case-bonded composite rocket propellants
Mußbach, Günter; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Multi-modal dense sphere packing algorithm for the simulation of thermites
Günthner, Christian; Knapp, Sebastian; Weiser, Volker
Konferenzbeitrag
Conference Paper
2015 Nanoparticles and antigen-specific T-cell therapeutics: A comprehensive study on uptake and release
Zupke, Oliver; Distler, Eva; Jürchott, Anna; Paiphansiri, Umaporn; Dass, Martin; Thomas, Simone; Hartwig, Udo F.; Theobald, Matthias; Landfester, Katharina; Mailänder, Volker; Herr, Wolfgang
Zeitschriftenaufsatz
Journal Article
2015 Nanoporöse Multitalente
Polyzoidis, Angelos; Piscopo, Calogero; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2015 Nanoprobing the acidification process during intracellular uptake and trafficking
Lerch, Simone; Ritz, Sandra; Bley, Karina; Messerschmidt, Claudia; Weiss, Clemens K.; Musyanovych, Anna; Landfester, Katharina; Mailänder, Volker
Zeitschriftenaufsatz
Journal Article
2015 Nanosilber-Systemtechnologie zur Vermeidung mikrobieller Materialzerstörung
Schmid, Helmut
Konferenzbeitrag
Conference Paper
2015 Near infrared spectroscopy as a tool for in-line control of process and material properties of PLA biopolymer
Becker, Wolfgang; Inone-Kauffman, Emilia Regina; Eckl, Wilhelm; Eisenreich, Norbert
Zeitschriftenaufsatz
Journal Article
2015 Neue Elektrolyte zur Steigerung der Energiedichte einer nicht-wässrigen Vanadium-Acetylacetonat-Redox-Flow-Batterie
Herr, Tatjana
Dissertation
Doctoral Thesis
2015 New approaches to the CL-20/HMX cocrystal a less sensitive high power explosive
Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas
Konferenzbeitrag
Conference Paper
2015 Non-destructive method to follow ageing of solid propellant in rocket motors
Mußbach, Günter; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Novel theoretical and computer-assisted modeling of isothermal and non-isothermal depolymerization kinetics
Bigger, S.W.; Cran, M.J.; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2015 On the mechanism of zirconium nitride formation by zirconium, zirconia and yttria burning in air
Malikova, E.; Pautova, J.; Gromov, A.; Monogarov, K.; Larionov, K.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2015 Overview of the R&D activities for the ITER bolometer diagnostic
Meister, H.; Eixenberger, H.; Gliss, C.; Kampke, A.; Kannamüller, M.; Koll, J.; Penzel, F.; Kotrocz, K.; Pataki, A.; Szücs, J.; Veres, G.; Fekete, T.; Tatar, L.; Detemple, P.; Mpoukouvalas, K.; Schmitt, S.
Konferenzbeitrag
Conference Paper
2015 Pair distribution function analysis of ammonium nitrate - evaluation of measuring systems for energetic materials
Kempa, Paul-Bernd; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2015 Palladium-catalyzed carbon-carbon cross-coupling reactions in thermomorphous double emulsions
Misuk, Viktor; Mai, Andreas; Giannopoulos, Konstantinos; Karl, Dominik; Heinrich, Julian; Rauber, Daniel; Löwe, Holger
Zeitschriftenaufsatz
Journal Article
2015 Parameterstudie zur thermochemischen Zersetzung organischer Materialien in geschmolzenen Salzen
Nieberl, Martin
Bachelor Thesis
2015 Phase change detection in neat and fiber reinforced polyamide 6 using dielectric analysis
Chaloupka, A.; Wedel, A.; Taha, I.; Rudolph, N.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2015 Polylactide-based nanoparticles with tailor-made functionalization
Beer, Veronika; Koynov, Kaloian; Steffen, Werner; Landfester, Katharina; Musyanovych, Anna
Zeitschriftenaufsatz
Journal Article
2015 Polypropylene numerical photoageing simulation by dose - response functions with respect to irradiation and temperature
Geburtig, A.; Wachtendorf, Volker; Trubiroha, Peter; Zäh, Matthias; Schönlein, Artur; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Reichert, Thomas
Aufsatz in Buch
Book Article
2015 Polyurethanes with components made of renewable resources and recyclates
Anders, T.
Vortrag
Presentation
2015 Post-Lithium-Ionen-Batterien
Tübke, Jens; Hagen, Markus
Aufsatz in Buch
Book Article
2015 Preparation and characterization of foamed propellants using supercritical fluids
Kröber, Hartmut; Böhnlein-Mauß, Jutta
Konferenzbeitrag
Conference Paper
2015 Presswerkzeuge ohne Dichtung
Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2015 ProCycle. Analyse und toxikologische Bewertung von Stäuben aus Recycling- und Verwertungsprozessen von Nanocomposites und Strategien zur Gefährdungsminimierung
Guschin, Viktor; Marioth, Eric
Vortrag
Presentation
2015 Produktgestaltung in der Partikeltechnologie. Bd.7
Tagungsband
Conference Proceeding
2015 Proof of concept: Magnetic fixation of dendron-functionalized iron oxide nanoparticles containing palladium nanoparticles for continuous-flow suzuki coupling reactions
Rehm, Thomas H.; Bogdan, Anca; Hofmann, Christian; Löb, Patrick; Shifrina, Zinaida; Morgan, David Gene; Bronstein, Lyudmila M.
Zeitschriftenaufsatz
Journal Article
2015 Propellants
Gettwert, Volker; Bohn, Manfred; Schubert, Hiltmar
Aufsatz in Buch
Book Article
2015 Protecting the structural integrity of composites in fire: Intumescent coatings in the intermediate scale
Hörold, A.; Schartel, B.; Trappe, V.; Gettwert, Volker; Korzen, M.
Zeitschriftenaufsatz
Journal Article
2015 Protein corona - from molecular adsorption to physiological complexity
Treuel, Lennart; Docter, Dominic; Maskos, Michael; Stauber, Roland H.
Zeitschriftenaufsatz
Journal Article
2015 Pulmonary surfactant augments cytotoxicity of silica nanoparticles: Studies on an in vitro air-blood barrier model
Kasper, Jennifer Y.; Feiden, Lisa; Hermanns, Maria I.; Bantz, Christoph; Maskos, Michael; Unger, Ronald E.; Kirkpatrick, C. James
Zeitschriftenaufsatz
Journal Article
2015 Pyroorganic flares - state of the art and progress
Weiser, Volker; Roth, Evelin; Raab, Angelika; Knapp, Sebastian; Kelzenberg, Stefan; Eckl, Wilhelm
Konferenzbeitrag
Conference Paper
2015 Quantitative replacement of citrate by phosphane on silver nanoparticle surfaces monitored by Surface-Enhanced Raman Spectroscopy (SERS)
Grass, Stefan; Diendorf, Jörg; Gebauer, Julia S.; Epple, Matthias; Treuel, Lennart
Zeitschriftenaufsatz
Journal Article
2015 Rankine cycle for hybrid vehicles: The potential for CO2 emissions reduction
Kraljevic, I.; Kollmeier, H.-P.; Spicher, U.
Konferenzbeitrag
Conference Paper
2015 Recomat-spectrometric application
Klahn, Thorsten; Zilly, Andreas; Schreiber, Achim; Deimling, Lukas
Konferenzbeitrag
Conference Paper
2015 Reforming of methane in a multistage microstructured reactor
Pennemann, Helmut; Bellinghausen, Rainer; Westermann, T.; Mleczko, Leslaw
Zeitschriftenaufsatz
Journal Article
2015 Results from miniaturized directed acoustic arrays
Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Walschburger, Erik; Eisenreich, Norbert
Konferenzbeitrag
Conference Paper
2015 Review of some peculiarities of the stability and decomposition of HNF and ADN
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Review of some peculiarities of the stability and decomposition of HNF and ADN
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Review on ICT's research on scalable non-lethal launchers and projectiles
Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Scholz, Peter; Thiel, Klaus-Dieter; Zettl, Sebastian
Konferenzbeitrag
Conference Paper
2015 Scale-up approaches for the ADN-prilling process by emulsion crystallization
Heintz, T.; Leisinger, K.; Roßmann, C.
Konferenzbeitrag
Conference Paper
2015 Schaum aus dem Gelben Sack
Schneider, Anja; Mack, Christoph; Rapp, Florian
Zeitschriftenaufsatz
Journal Article
2015 Screening of natural lightweight fillers for sheet moulding compound in North America
Pierce, A.; Potyra, T.; Henning, F.
Konferenzbeitrag
Conference Paper
2015 Segmented flow-based multistep synthesis of cadmium selenide quantum dots with narrow particle size distribution
Misuk, V.; Schmidt, Maxim; Braukmann, Sandra; Giannopoulos, Konstantinos; Karl, Dominik; Löwe, Holger
Zeitschriftenaufsatz
Journal Article
2015 Self-propagating combustion synthesis of nanostructured particles
Imiolek, Andreas; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Lity, André
Konferenzbeitrag
Conference Paper
2015 Sieving effects in electrical double-layer capacitors based on neat [Al(hfip)(4)](-) and [NTf2](-) ionic liquids
Roznyatovskaya, Nataliya; Rupp, A.B.A.; Tübke, Jens; Krossing, I.
Zeitschriftenaufsatz
Journal Article
2015 Simulation and experimental validation of gaps and bridging in the automated fiber placement process
Lichtinger, R.; Lacalle, J.; Hinterhölzl, R.; Beier, U.; Drechsler, K.
Zeitschriftenaufsatz
Journal Article
2015 Single cell analysis of cancer cells using an improved RT-MLPA method has potential for cancer diagnosis and monitoring
Kvastad, L.; Solnestam, B. Werner; Johansson, E.; Nygren, A.O.; Laddach, N.; Sahlén, P.; Vickovic, S.; Bendigtsen, Schirmer C.; Aaserud, M.; Floer, L.; Borgen, E.; Schwind, Carmen; Himmelreich, Ralf; Latta, Daniel; Lundeberg, J.
Zeitschriftenaufsatz
Journal Article
2015 Single-cell ChIP-seq reveals cell subpopulations defined by chromatin state
Rotem, Assaf; Ram, Oren; Shoresh, Noam; Sperling, Ralph A.; Goren, Alon; Weitz, David A.; Bernstein, Bradley E.
Zeitschriftenaufsatz
Journal Article
2015 Small scale motor tests of ADN/GAP based propellants
Gettwert, Volker; Fischer, Sebastian
Konferenzbeitrag
Conference Paper
2015 Stability and characterization of GAP bonded ADN-propellant - the problem of gas formation during curing with isocyanates and characteristics of the glass-rubber transition
Bohn, Manfred A.; Gettwert, Volker
Konferenzbeitrag
Conference Paper
2015 Stability of UiO-66 under acidic treatment: Opportunities and limitations for post-synthetic modifications
Piscopo, Calogero; Polyzoidis, Angelos; Schwarzer, Maud; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2015 Stand und Perspektiven von Redox-Flow-Batterien als stationäre Speicherlösungen
Tübke, Jens; Noack, Jens; Wietschel, L.
Zeitschriftenaufsatz
Journal Article
2015 Supported sulfonic acids: Solid catalysts for batch and continuous-flow synthetic processes
Piscopo, Calogero
Zeitschriftenaufsatz
Journal Article
2015 Surface plasmon-based techniques for the analysis of plasma deposited functional films and surfaces
Chu, Li-Quiang; Zhang, Qian; Förch, Renate
Zeitschriftenaufsatz
Journal Article
2015 Synergists for Hexaphenoxycyclotriphosphazene in Cast PA6
Höhne, Carl-Christoph; Käbisch, Bert; Anders, Thorsten; Kroke, Edwin
Poster
2015 Synthesis and characterization of nitrate based energetic ionic liquids (EILs)
Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Krause, Horst
Konferenzbeitrag
Conference Paper
2015 Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from gasphase
Bunte, Gudrun; Hürttlen, Jürgen; Heil, Moritz; Rieger, Max; Krause, Horst
Konferenzbeitrag
Conference Paper
2015 Systematische Untersuchung thermischer Prozesse für das Recycling von kohlenstofffaserverstärkten Kunststoffen
Benka, Christopher
Bachelor Thesis
2015 Techniques to control polymersome size
Bleul, Regina; Thiermann, Raphael; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2015 Temperature-triggered protein adsorption on polymer-coated nanoparticles in serum
Koshkina, Olga; Lang, Thomas; Thiermann, Raphael; Docter, Dominic; Stauber, Roland H.; Secker, Christian; Schlaad, Helmut; Weidner, Steffen; Mohr, Benjamin; Maskos, Michael; Bertin, Annabelle
Zeitschriftenaufsatz
Journal Article
2015 The Chemistry of Redox-Flow Batteries
Noack, Jens; Roznyatovskaya, Nataliya; Herr, T.; Fischer, Peter
Zeitschriftenaufsatz
Journal Article
2015 The effect of extracellular matrix proteins on the cellular response of HUVECS and HOBS after covalent immobilization onto titanium
Heller, Martin; Kämmerer, Peer W.; Al-Nawas, Bilal; Luszpinski, Marie-Anne; Förch, Renate; Brieger, Jürgen
Zeitschriftenaufsatz
Journal Article
2015 The effect of plasticizers on the glass-to-rubber behavior of Desmophen® 2200 based elastomers used for composite propellants
Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 The influence of different nitrocelluloses on the interaction in a binder-plasticizer system
Mitró, Daniel; Böhnlein-Mauß, Jutta
Konferenzbeitrag
Conference Paper
2015 Thermal field-flow fractionation of colloidal suspensions
Eslahian, Kyriakos A.; Maskos, Michael
Aufsatz in Buch
Book Article
2015 Thermocatalytic decomposition of propane for pure hydrogen production and subsequent carbon gasification: Activity and long-term stability of Ni/Al2O3 based catalysts
Neuberg, Stefan; Pennemann, Helmut; Wiborg, Jens Ole; Wichert, Martin; Zapf, Ralf; Ziogas, Athanassios; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2015 Thermodynamic derivation of open circuit voltage in vanadium redox flow batteries
Pavelka, M.; Wandschneider, F.; Mazur, P.
Zeitschriftenaufsatz
Journal Article
2015 Thermogravimetric study on the reaction of magnesium and aluminum in nitrogen
Kuchenreuther-Hummel, V.; Rozincsak, Linda; Neutz, Jochen
Konferenzbeitrag
Conference Paper
2015 Thermoplastic composites in structural lightweight applications
Huber, T.; Henning, F.; Menrath, A.; Heinzle, V.
Konferenzbeitrag
Conference Paper
2015 Trace gas VOC detection using metal-organic frameworks as pre-concentrators and semiconductor gas sensors
Leidinger, M.; Rieger, M.; Weishaupt, D.; Sauerwald, T.; Nägele, Marco; Hürttlen, Jürgen; Schütze, A.
Zeitschriftenaufsatz
Journal Article
2015 Tracer gas experiments in subways using an integrated measuring and analysis system for sulphur hexafluoride
Brüne, Markus; Spiegel, Jonathan; Pflitsch, Andreas; Potje-Kamloth, Karin; Stein, Christian
Konferenzbeitrag
Conference Paper
2015 Ultrafast real-time PCR with integrated melting curve analysis and duplex capacities using a low-cost polymer lab-on-a-chip system
Gransee, Rainer; Schneider, Tristan; Elyorgun, Deniz; Strobach, Xenia; Schunck, Tobias; Gatscha, Theresia; Winkler, Christian; Höth, Julian
Konferenzbeitrag
Conference Paper
2015 Untersuchungen an a-C:H:Me beschichteten Substraten zur Eignung als alternatives Bipolarplattenmaterial für wässrige Vanadium Redox-Flow Batterien
Richards, Justin
Dissertation
Doctoral Thesis
2015 Verbundvorhaben: Bioschaumplatten - Extrusionsgeschäumte, dickwandige Plattenelemente aus einem biobasierten, thermoplastischen Kunststoff
Wodke, Thomas; Rapp, Florian; Basler, Aaron; Maga, Daniel
Bericht
Report
2015 Verfahren zur Gewinnung von aromatischen Verbindungen
Forstner, Jochen; Unser, Steffen; Schweppe, Rainer
Patent
2015 Verfahren zur Herstellung thermoplastischer Verbundbauteile
Wendel, Rainer; Arik, Cahit; Henning, Frank
Patent
2015 Verfahren zur Herstellung von Propen aus Propanol
Forstner, Jochen; Unser, Steffen; Böringer, Sarah
Patent
2015 Verfahren zur Konsolidierung von thermoplastitschen oder thermoelastischen Faserverbundstrukturen
Baumgärtner, Sebastian; Heinzle, Volker; Lohr, Christoph; Henning, Frank; Rampf, Wolf-Georg
Patent
2015 Verfahren zur Rückgewinnung von Wärme aus Verbrennungsmotoren sowie zur Umwandlung der rückgewonnenen Wärme in mechanische Energie
Kollmeier, Hans-Peter; Kraljevic, Ivica; Rohrpasser, Christian; Striebich, Helmut
Patent
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2015 Verkürzung von Prozessketten am Beispiel des Direkt-SMC-Prozesses
Keckl, C.
Konferenzbeitrag
Conference Paper
2015 Wetting of oxidizer particles by binder and plasticizer molecules - microcalorimetry experiments and computer simulations
Nardai, Michael M.; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2015 Widely tuneable quantum cascade lasers for spectroscopic sensing
Wagner, J.; Ostendorf, R.; Grahmann, Jan; Merten, André; Hugger, S.; Jarvis, J.P.; Fuchs, F.; Boskovic, D.; Schenk, Harald
Konferenzbeitrag
Conference Paper
2015 X-Bond - Entkleben unter Nutzung exothermer Reaktionen
Winkel, A.; Kahlmeyer, M.; Böhm, S.; Sims, S.; Gettwert, V.; Urban, H.
Konferenzbeitrag
Conference Paper
2015 Über 300.000 Kilometer unter Strom
Stella, Kevin; Wollersheim, Olaf; Fichtner, Wolf; Jochem, Patrick; Schücking, Maximilian; Nastold, Max; Ensslen, Axel; Wietschel, Martin; Held, Michael; Gnann, Till; Friedmann, Michael; Graf, Roberta; Wohlfarth, Katharina
Bericht
Report
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Publikationen aus dem Jahr 2014

Hier finden Sie alle Publikationen des Fraunhofer ICT, die im Jahr 2014 entstanden sind.

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2014 3. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2014
Tagungsband
Conference Proceeding
2014 3D tomographic characterization of sandwich structures
Dietrich, Stefan; Weidenmann, Kay; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2014 A coupled-physics model for the vanadium oxygen fuel cell
Wandschneider, F.T.; Küttinger, M.; Noack, Jens; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Nirschl, H.
Zeitschriftenaufsatz
Journal Article
2014 A falling-film microreactor for enzymatic oxidation of glucose
Illner, Sabine; Hofmann, Christian; Löb, Patrick; Kragl, Udo
Zeitschriftenaufsatz
Journal Article
2014 A multi-stack simulation of shunt currents in vanadium redox flow batteries
Wandschneider, F.T.; Röhm, S.; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Nirschl, H.
Zeitschriftenaufsatz
Journal Article
2014 A novel technology for natural gas conversion by means of integrated oxidative coupling and dry reforming of methane
Thybaut, Joris; Marin, Guy; Mirodatos, Claude; Schuurman, Yves; Veen, Andre van; Sadykov, Vladislav; Pennemann, Helmut; Bellinghausen, Rainer; Mleczko, Leslaw
Zeitschriftenaufsatz
Journal Article
2014 A robust electrical sensor for contactless control of moving plugs in microfluidic systems with high accuracy
Hoffmann, Almuth; Potje-Kamloth, Karin; Hardt, Steffen; Baßler, Michael
Konferenzbeitrag
Conference Paper
2014 Activation energies for the decomposition of nitrate ester groups at the anhydroglucopyranose ring positions C2, C3 and C6 of nitrocellulose using the nitration of a dye as probe
Moniruzzaman, Mohammed; Bellerby, John M.; Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2014 Aging of ADN rocket propellant formulations with desmophen®-based elastomer binder
Cerri, Sara; Bohn, Manfred; Menke, Klaus; Galfetti, Luciano
Zeitschriftenaufsatz
Journal Article
2014 Air-blood barrier translocation of tracheally instilled gold nanoparticles inversely depends on particle size
Kreyling, Wolfgang G.; Hirn, Stephanie; Möller, Winfried; Schleh, Carsten; Wenk, Alexander; Celik, Gülnaz; Lipka, Jens; Schäffler, Martin; Haberl, Nadine; Johnston, Blair D.; Sperling, Ralph; Schmid, Günter; Simon, Ulrich; Parak, Wolfgang J.; Semmler-Behnke, Manuela
Zeitschriftenaufsatz
Journal Article
2014 Alt-Handy-Recycling - Eine neue Rohstoffquelle
Teipel, U.; Wolf, S.; Köpnick, H.; Bischlager, O.; Daehn, C.
Konferenzbeitrag
Conference Paper
2014 Aluminum nanoparticles application to energetic systems - new horizons or sunset?
Gromov, Alexander; Teipel, Ulrich; Luca, L. de
Konferenzbeitrag
Conference Paper
2014 Antimicrobial bioactive polymer coatings
Förch, Renate; Duque, Luis; Lotz, Alexander
Aufsatz in Buch
Book Article
2014 Application of double emulsions based on paramagnetic ionic liquids
Misuk, Viktor; Mai, Andreas; Giannopoulos, Konstantinos; Alobaid, Falah; Epple, Bernd; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Application of micro-Raman spectroscopy for fight against terrorism and smuggling
Almaviva, S.; Botti, S.; Palucci, A.; Puiu, A.; Schnürer, Frank; Schweikert, Wenka; Romolo, F.S.
Zeitschriftenaufsatz
Journal Article
2014 Approaches to quantify amine groups in the presence of hydroxyl functional groups in plasma polymerized thin films
Ruiz, J.-C.; Taheri, S.; Michelmore, A.; Robinson, D.E.; Short, R.D.; Vasilev, K.; Förch, R.
Zeitschriftenaufsatz
Journal Article
2014 Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them
Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M.
Konferenzbeitrag
Conference Paper
2014 Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them
Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M.
Konferenzbeitrag
Conference Paper
2014 Aufbereitung nachwachsender Rohstoffe durch Zerkleinerung
Eisenlauer, M.; Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Aufbereitung von sekundären mineralischen Baustoffen
Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Automated microfluidically controlled electrochemical biosensor for the rapid and highly sensitive detection of Francisella tularensis
Dulay, Samuel B.; Gransee, Rainer; Julich, Sandra; Tomaso, Herbert; O'Sullivan, Ciara K.
Zeitschriftenaufsatz
Journal Article
2014 Benetzungsverhalten von Kohlenstoff-Nanoröhren
Dresel, A.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Benetzungsverhalten von Kohlenstoffnanoröhren
Dresel, A.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Benetzungsverhalten von mineralischen Sekundärrohstoffen
Hennig, M.; Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Biopolymer foams - relationship between material characteristics and foaming behavior of cellulose based foams
Rapp, F.; Schneider, A.; Elsner, P.
Konferenzbeitrag
Conference Paper
2014 Bodengranulat zur reversiblen Speicherung von Wasser und Verfahren zu dessen Herstellung
Schmid, Helmut; Narayana, Ida-Bagus Kesawa; Braun, Monika
Patent
2014 Brennkraftmaschine und Verfahren zu ihrem Betrieb
Schwaibold, Steffen; Fischer, Michael; Kraljevic, Ivica
Patent
2014 Burning behaviour of aluminium and its hydride in an ADN/GAP-matrix
Franzin, Andrea; Weiser, Volker; Gettwert, Volker; Luca, L. de; Roth, Evelin; Kelzenberg, Stefan; Poth, H.; Bieroth, D.
Konferenzbeitrag
Conference Paper
2014 Burning behaviour of B/KDN-mixtures compared with B/KNO3
Weiser, Volker; Lity, André; Kelzenberg, Stefan; Koleczko, Andreas; Roth, Evelin; Schaller, Uwe; Walschburger, Erik
Konferenzbeitrag
Conference Paper
2014 Cell energy density and electrolyte/sulfur ratio in Li-S cells
Hagen, Markus; Fanz, Patrik; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2014 Cell size discrimination based on the measurement of the equilibrium velocity in rectangular microchannels for point of care diagnostics
Schott, L.; Sommer, C.; Walther, T.; Baßler, M.
Konferenzbeitrag
Conference Paper
2014 Cellulose based nanoparticles precipitated from the ionic liquid (BnMIM)DCA during a continuous emulsification technique
Eidmann, Evelyn; Ehm, Nadin; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Chain alignment for improved properties - optimization of PLA and PHB-V by crystallization and reinforcement
Moser, K.; Bergmann, B.; Diemert, J.; Elsner, P.
Konferenzbeitrag
Conference Paper
2014 Challenges in the oxidative coupling of methane employing a microstructured stainless steel reactor
Chaar, Munir; Muhler, Martin; Pennemann, Helmut; Veen, Andre C. van
Konferenzbeitrag
Conference Paper
2014 Characterisation of enhanced blast formulations with different methods
Gerber, Peter; Aurich, Hagen; Happ, Andreas; Sättler, Axel
Konferenzbeitrag
Conference Paper
2014 Characterization of ADN/GAP-based and ADN/desmophen-based propellant formulations and comparison with AP analogues
Cerri, Sara; Bohn, Manfred; Menke, Klaus; Galfetti, Luciano
Zeitschriftenaufsatz
Journal Article
2014 Characterization of high-pressure resin transfer molding process variants for manufacturing high-performance composites
Chaudhari, Raman
Dissertation
Doctoral Thesis
2014 Characterization of nanoparticles under physiological conditions
Eslahian, Kyriakos A.; Lang, Thomas; Bantz, Christoph; Keller, Rabea; Sperling, Ralph; Docter, Dominic; Stauber, Roland H.; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2014 Charakterisierung von Bariumstrontiumtitanat-Partikeln mithilfe der Röntgenbeugung
Herrmann, Michael; Förter-Barth, Ulrich; Roßmann, Christian; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Charakterisierung von Nanopartikel-Protein-Agglomeraten in biologisch relevanten Medien
Lang, T.
Dissertation
Doctoral Thesis
2014 Chemoselective hydrogenation of functionalized nitroaromatics in continuous mode: Falling film and mini fixed-bed microreactors
Berguerand, C.; Cornu, I.; Yuranov, I.; Rehm, T.H.; Zapf, R.; Löb, P.; Szribik, G.; Kiwi-Minsker, L.
Konferenzbeitrag
Conference Paper
2014 Combustion Features of ADN-Based Solid Rocket Propellants for Space Applications
Luca, L.T. de; Palmucci, I.; Franzin, A.; Trache, D.; Pang, W.-Q.; Weiser, V.
Konferenzbeitrag
Conference Paper
2014 Comparison of experimental and theoretical pair distribution functions of ammonium nitrate
Kempa, Paul-Bernd; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2014 Compressibility and permeability of fiber reinforcements for pultrusion
Bezerra, R.; Wilhelm, F.; Henning, F.
Konferenzbeitrag
Conference Paper
2014 Condensation reactions in microflow systems
Lohse, Andre; Misuk, Viktor; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Conductive polymer composites and coated metals as alternative bipolar plate materials for all-vanadium redox-flow batteries
Caglar, B.; Richards, J.; Fischer, Peter; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2014 Continuous supercritical hydrothermal synthesis of iron oxide nanoparticle dispersions and their characterization
Daschner de Tercero, M.; Röder, C.; Fehrenbacher, U.; Teipel, Ulrich; Türk, M.
Zeitschriftenaufsatz
Journal Article
2014 Continuous-flow photochemistry in microstructured environment
Rehm, Thomas
Aufsatz in Buch
Book Article
2014 Continuously manufactured magnetic polymersomes as theranostic tools in nanomedicine
Bleul, Regina; Löwa, Norbert; Thiermann, Raphael; Häfeli, Urs; House, Michael J.; St. Pierre, Timothy G.; Thrams, Lutz; Maskos, Michael
Konferenzbeitrag
Conference Paper
2014 Corrigendum: Quantifying cell-generated mechanical forces within living embryonic tissues
Campàs, O.; Mammoto, T.; Hasso, S.; Sperling, R.A.; O'connell, D.; Bischof, A.G.; Maas, R.; Weitz, D.A.; Mahadevan, L.; Ingber, D.E.
Zeitschriftenaufsatz
Journal Article
2014 Deflagration And Detonation Of Mixtures Of Ammonium Or Urea Nitrates With An Energetic Thermoplastic Elastomer
Quaresma, J.; Pineiro, M.; Campos, J.; Keicher, T.; Krause, H.
Konferenzbeitrag
Conference Paper
2014 Detonation measurements using single optical fibers
Campos, Jose; Mendes, R.; Quaresma, J.; Anastacio, A.; Keicher, Thomas; Deimling, Lukas; Krause, Horst
Konferenzbeitrag
Conference Paper
2014 Development and characterization of a 280 cm2 vanadium/oxygen fuel cell
Noack, Jens; Cremers, Carsten; Bayer, D.; Tübke, Jens; Pinkwart, Karsten
Zeitschriftenaufsatz
Journal Article
2014 Development of anodic materials with elevated hydrogen sulfide tolerance for HT-PEMFCs using reformat
Rau, M.S.; Cremers, C.; Pinkwart, K.; Tübke, J.
Konferenzbeitrag
Conference Paper
2014 Development of carbon nanotube and graphite filled polyphenylene sulfide based bipolar plates for all-vanadium redox flow batteries
Caglar, B.; Fischer, Peter; Kauranen, P.; Karttunen, M.; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2014 Development of graphite and carbon nanotube filled thermoplastic based bipolar plates for all-vanadium redox flow batteries
Caglar, Burak
Dissertation
Doctoral Thesis
2014 Die Größenabhängigkeit der Gleichgewichtsgeschwindigkeit von Partikeln beim Transport in Mikrokanälen
Sommer, C.
Dissertation
Doctoral Thesis
2014 Dropled-based multistep CdSe-QD synthesis in continuous flow
Misuk, Viktor; Braukmann, Sandra; Mai, Andreas; Schmidt, Maxim; Giannopoulos, Konstantinos; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Druckfiltration von Kohlenstoffnanoröhren-Suspensionen
Dresel, A.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Durchflusszytometrie nach dem Prinzip der räumlich modulierten Fluoreszenz
Quint, S.
Dissertation
Doctoral Thesis
2014 Dynamisch-physikalische Modellierung von Siebklassierprozessen
Hennig, M.; Elskamp, F.; Kruggel-Emden, H.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Dynamische Modellierung von Siebklassierprozessen
Hennig, M.; Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Effect of boron addition on micro-aluminum-particle-based multifunctional high-temperature coatings
Roussel Garcia, Raquel; Kolarik, Vladislav; Juez-Lorenzo, Maria del Mar; Fietzek, Harald
Zeitschriftenaufsatz
Journal Article
2014 Effect of mobile phone radiation on the human body and textile remedies
Roy, T.; Govekar, A.; Rajpurohit, A.
Zeitschriftenaufsatz
Journal Article
2014 Effect of oxygen addition on the water-gas shift reaction over Pt/CeO2 catalysts in microchannels
Neuberg, Stefan; Keller, Steffen; O'Connell, Martin; Schürer, Jochen; Thiele, Richard; Zapf, Ralf; Ziogas, Athanassios; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2014 Effect of oxygen addition to the feed of a 5 kwel microstructured WATER-GAS shift reactors
Schürer, Jochen; Keller, Steffen; Ziogas, Athanassios; Thiele, Richard; Kolb, Gunther
Konferenzbeitrag
Conference Paper
2014 Effects of the physicochemical properties of titanium dioxide nanoparticles, commonly used as sun protection agents, on microvascular endothelial cells
Strobel, Claudia; Torrano, Adriano A.; Herrmann, Rudolf; Malissek, Marcelina; Bräuchle, Christoph; Reller, Armin; Treuel, Lennart; Hilger, Ingrid
Zeitschriftenaufsatz
Journal Article
2014 Effiziente Recyclingverfahren für Altbatterien
Kross, S.; Teipel, Ulrich; Würfel, K.
Zeitschriftenaufsatz
Journal Article
2014 Effizientes Rohstoffrecycling? Beurteilung von Verfahrenstechnologien zur Verwertung von Lithiumbatterien und -akkumulatoren
Würfel, K.; Kross, S.; Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Eine dufte Technik
Just, Daniel; Diemert, Jan
Zeitschriftenaufsatz
Journal Article
2014 Einfluss lokaler Endlosfaserverstärkungen auf das Eigenschaftsprofil struktureller Spritzgießbauteile
Huber, Timo
Dissertation
Doctoral Thesis
2014 Electrochemistry in flow
Schülein, Julian; Löwe, Holger
Aufsatz in Buch
Book Article
2014 Electrooxidation of ethanol at room temperature on carbon-supported Pt and Rh-containing catalysts: A DEMS study
Bach Delpeuch, A.; Asset, T.; Chatenet, M.; Cremers, Carsten
Zeitschriftenaufsatz
Journal Article
2014 Elektrische Leitfähigkeit von Polypropylen-CNT-Kompositbauteilen in Abhängigkeit des Kristallisationsgrades
Imiolek, A.I.; Guschin, V.G.; Becker, Wolfgang; Weiss, Patrick; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Elektrochemische Detektion von Explosivstoffen im Meer
Rabenecker, Peter; Pinkwart, Karsten
Aufsatz in Buch
Book Article
2014 Elektrochemischer Gassensor, Verfahren zu dessen Herstellung und dessen Verwendung
Baltes, Norman; Pinkwart, Karsten; Fischer, Peter
Patent
2014 Energetic Materials. Particles, Processing, Applications
Tagungsband
Conference Proceeding
2014 Energy systems for a greener future
Kolb, Gunther; O'Connell, Martin; Kiesewalter, Stefan
Zeitschriftenaufsatz
Journal Article
2014 Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie
Wimmer, A.-K.; Salles, A.; Müller, T.
Konferenzbeitrag
Conference Paper
2014 Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie
Wimmer, A.-K.; Salles, A.; Müller, T.
Konferenzbeitrag
Conference Paper
2014 Entwicklung und Test von Prototypkomponenten für die ITER Bolometerdiagnostik
Meister, H.; Schmitt, Stefan
Bericht
Report
2014 Entwicklung von Technologien und Komponenten für ein Lab-on-Chip System mit elektronischer Detektion
Welzel, Knut; Gransee, Rainer
Bericht
Report
2014 Environmentally-friendly, heat-resistant profiles
Moser, Kevin; Holzer, Andrei; Bergmann, Björn
Zeitschriftenaufsatz
Journal Article
2014 Erodiervorrichtung
Neumann, Frank; Kunz, Stefan; Kraus, Silvio; Lahm, David
Patent
2014 Evaluation of GA/BAMO-copolymer binder for AL/AP-based propellants
Gettwert, Volker; Keicher, Thomas; Franzin, Andrea; Jung, Marcus; Weiser, Volker
Konferenzbeitrag
Conference Paper
2014 Evaluation of process induced residual stresses in continuous fiber-reinforced hybrid thermoplastic composites
Paul, H.; Schweizer, F.; Hangs, B.
Konferenzbeitrag
Conference Paper
2014 Even lighter
Keckl, Christoph; Kuppinger, Jan; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2014 Eye-safe UV Raman spectroscopy for remote detection of explosives and their precursors in fingerprint concentration
Almaviva, S.; Angelini, F.; Chirico, R.; Palucci, A.; Nuvoli, M.; Schnuerer, F.; Schweikert, W.; Romolo, F.S.
Konferenzbeitrag
Conference Paper
2014 Flexweb "Erzeugung von Fäden/Geweben auf innovativer Kollagenbasis für den Textil- und Medizinbereich mit neuartiger flexibler Webtechnologie"
Müller, G.; Kleinsteinberg, K.; Simon, B.; Neumann, F.
Bericht
Report
2014 Fluorescence detection in Lab-on-a-chip systems using ultrafast nucleic acid amplification methods
Gransee, Rainer; Schneider, Tristan; Elyorgun, Deniz; Strobach, Xenia; Schunck, Tobias; Gatscha, Theresia; Höth, Julian
Konferenzbeitrag
Conference Paper
2014 Foam-injected sandwich panels with continuous-reinforced facings
Menrath, A.; Henning, F.; Huber, T.; Roch, A.; Riess, C.
Konferenzbeitrag
Conference Paper
2014 Foreword
Manelis, G.; Schubert, H.
Aufsatz in Buch
Book Article
2014 Future flare compositions
Lingen, J.N.J. van; Meuken, D.; Hackspik, M.M.; Mäkeläinen, T.; Weiser, V.; Poulson, G.W.
Konferenzbeitrag
Conference Paper
2014 Generation of very fine ammonium dinitramide (ADN) paricles by bead milling technology
Roßmann, Christian; Heintz, Thomas; Herrmann, Michael
Konferenzbeitrag
Conference Paper
2014 Gewinnung Mikrofibrillierter Cellulose (MFC) durch mechanischen Aufschluss
Köster, A.; Förter-Barth, U.; Herrmann, M.; Schweppe, R.; Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Good Vibrations - Piezoaktoren beschleunigen Mikrostrukturierung
Arnold, Steffen; Neumann, Frank; Reiff, Ellen-Christine
Zeitschriftenaufsatz
Journal Article
2014 Good Vibrations: Aktorik für die Mikrostrukturierung mittels Senkerosion
Arnold, Steffen; Neumann, Frank; Reiff, Ellen-Christine
Zeitschriftenaufsatz
Journal Article
2014 Handy clever entsorgen
Gantner, O.; Köpnick, H.; Bischlager, O.; Teipel, U.; Hagelüken, C.; Reller, A.
Konferenzbeitrag
Conference Paper
2014 Heat storage by zeolites: A small scale demonstration
Elsner, Peter; Epple, Boris; Kollmeier, H.P.; Merkel, S.; Simsek, A.; Eckl, Wilhelm; Pappert, Sandra; Neutz, Jochen
Konferenzbeitrag
Conference Paper
2014 Herstellung von Nanocellulose durch mechanischen Aufschluss
Köster, Alexander; Förter-Barth, Ulrich; Herrmann, Michael; Schweppe, Rainer; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2014 Hexamethoxycyclotriphosphazene as a flame retardant for polyurethane foams
Käbisch, B.; Fehrenbacher, U.; Kroke, E.
Zeitschriftenaufsatz
Journal Article
2014 High-throughput continuous synthesis of end-capped siloxane nanoparticles using chlorosilanes
Schülein, Julian; Löwe, Holger; Maskos, Michael
Konferenzbeitrag
Conference Paper
2014 High-voltage ignition of thermite deposits
Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Eckl, Wilhelm
Konferenzbeitrag
Conference Paper
2014 Holistic and consistent design process for hollow structures based on braided textiles and RTM
Gnädinger, Florian; Karcher, Michael; Henning, Frank; Middendorf, Peter
Zeitschriftenaufsatz
Journal Article
2014 Hot-spot modelling of propellant regression
Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker
Konferenzbeitrag
Conference Paper
2014 HTPB bonded pyro-organic spectral flares
Roth, Evelin; Weiser, Volker; Raab, Angelika; Lity, André
Konferenzbeitrag
Conference Paper
2014 Hydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage
Reza, M.T.; Becker, Wolfgang; Sachsenheimer, Kerstin; Mumme, J.
Zeitschriftenaufsatz
Journal Article
2014 ICT-cellular-combustion-algorithm (ICCA) application to the combustion of complex shaped propellants
Wurster, Sebastian; Fischer, Thomas
Konferenzbeitrag
Conference Paper
2014 Ignition of hydrogen jet fires from high pressure storage
Keßler, Armin; Schreiber, Achim; Wassmer, Conrad; Deimling, Lukas; Knapp, Sebastian; Weiser, Volker; Sachsenheimer, Kerstin; Langer, G.; Eisenreich, N.
Zeitschriftenaufsatz
Journal Article
2014 Impact of protein modification on the protein corona on nanoparticles and nanoparticle-cell interactions
Treuel, L.; Brandholt, S.; Maffre, P.; Wiegele, S.; Shang, L.; Nienhaus, G.U.
Zeitschriftenaufsatz
Journal Article
2014 Improvement of mechanical properties by additive assisted laser sintering of PEEK
Kroh, M.; Bonten, C.; Eyerer, P.
Konferenzbeitrag
Conference Paper
2014 Improving composite process efficiency on a structural frame for a commercial truck storage door
Ruby, M.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.
Konferenzbeitrag
Conference Paper
2014 Improving the reaction of two-phase-reactions
Karl, Dominik; Misuk, Viktor; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 In vitro investigation of silica nanoparticle uptake into human endothelial cells under physiological cyclic stretch
Freese, Christian; Schreiner, Daniel; Anspach, Laura; Bantz, Christoph; Maskos, Michael; Unger, Ronald E.; Kirkpatrick, C. James
Zeitschriftenaufsatz
Journal Article
2014 In vivo continuous glucose monitoring using a chip based near infrared sensor
Mohammadi, Lhoucine Ben; Sigloch, Susanne; Frese, Ines; Welzel, Knut; Göddel, Michael; Klotzbücher, Thomas
Konferenzbeitrag
Conference Paper
2014 In vivo evaluation of a chip based near infrared sensor for continuous glucose monitoring
Mohammadi, Lhoucine Ben; Klotzbücher, Thomas; Sigloch, Susanne; Welzel, Knut; Göddel, Michael; Pieber, Thomas R.; Schaupp, Lukas
Zeitschriftenaufsatz
Journal Article
2014 Increasing the energy density of the non-aqueous vanadium redox flow battery with the acetonitrile-1,3-dioxolane-dimethyl sulfoxide solvent mixture
Herr, T.; Fischer, Peter; Tübke, Jens; Pinkwart, Karsten; Elsner, Peter
Zeitschriftenaufsatz
Journal Article
2014 Influence of an optimized 3D-reinforcement layout on the structural mechanics of co-bonded CFRP joints
Jürgens, M.; Nogueira, A.C.; Lang, H.; Hombergsmeier, E.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2014 Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements
Mußbach, Günter; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2014 Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements
Mußbach, Günter; Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2014 Inline-Prozessanalyse chemischer Mikroreaktionsprozesse mittels MIR-Laserspektroskopie
Boskovic, Dusan; Schweikert, Wenka; Panic, Slobodan; Schwan, K.; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2014 Integrated DNA and RNA extraction and purification on an automated microfluidic cassette from bacterial and viral pathogens causing community-acquired lower respiratory tract infections
Heirstraeten, Liesbet van; Spang, Peter; Schwind, Carmen; Drese, Klaus S.; Ritzi-Lehnert, Marion; Nieto, Benjamin; Camps, Marta; Landgraf, Bryan E.; Guasch, Francesc; Corbera, Antoni Homs; Samitier, Josep; Goossens, Herman; Malhotra-Kumar, Surbhi; Röser, Tina
Zeitschriftenaufsatz
Journal Article
2014 Integration eines Mikroreaktor-basierten Multipurpose-Aufbaus in eine containerartige Produktionsinfrastruktur
Löb, Patrick; Rehm, Thomas H.; Ghaini, Aras; Illg, Tobias; Lang, J.; Richert, Hannes
Zeitschriftenaufsatz
Journal Article
2014 Intensified catalytic reactor design for the conversion of volatile fatty acids produced by sewage treatment plant
Jayamurthy, M.; O'Connell, Martin; Zapf, Ralf; Kolb, Gunther; Komodromos, C.; Bhattacharya, A.
Konferenzbeitrag
Conference Paper
2014 Introduction and outlook
Löwe, Holger
Aufsatz in Buch
Book Article
2014 Investigación de recubrimientos multifuncionales en base de micropartículas esféricas de aluminio para aplicación a altas temperatur
Roussel Garcia, Raquel
Dissertation
Doctoral Thesis
2014 Investigating cavity pressure behavior in high-pressure RTM process variants
Rosenberg, P.; Chaudhari, R.; Karcher, M.; Henning, F.; Elsner, P.
Konferenzbeitrag
Conference Paper
2014 Investigation of quality and reproducibility of foamed propellants
Böhnlein-Mauß, Jutta; Kröber, Hartmut
Konferenzbeitrag
Conference Paper
2014 Investigation of the effect of ageing of RDX containing HTPB and GAP bonded high explosive charges on their thermal and shock sensitivity
Bohn, Manfred A.; Borne, L.; Herrmann, Michael; Gerber, Peter; Kaiser, M.
Vortrag
Presentation
2014 Investigation of the nitrate based EIL 4-Amino-1-methyl-1,2,4- triazolium nitrate as a plasticizer
Schaller, Uwe; Weiser, Volker; Keicher, Thomas; Krause, Horst
Konferenzbeitrag
Conference Paper
2014 Investigation of the Shear Thinning Behavior of Epoxy Resins for Utilization in Vibration Assisted Liquid Composite Molding Processes
Meier, R.; Kirdar, C.; Rudolph, N.; Zaremba, S.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2014 Ionic liquids as phase-transfer catalysts in Suzuki cross-coupling reactions in continuous flow
Habermann, Diana; Breuch, Denis; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Kategorisierung der Schülerlabore - Schülerlabor mit Berufsorientierung
Krause, Dörthe; Martin, U.
Zeitschriftenaufsatz
Journal Article
2014 Kohlenstofffasern wiedergewinnen
Emmerich, Rudolf; Kuppinger, Jan
Zeitschriftenaufsatz
Journal Article
2014 Kontinuierliche Verfolgung von Fouling-Prozessen in Rohrreaktoren 229 mittels Wärmefluss-Sensorik
Antes, J.; Löbbecke, S.; Jentner, D.
Konferenzbeitrag
Conference Paper
2014 Lab2Venture - Unternehmerisches Denken und Handeln in Schülerlaboren
Parrisius, M.; Krause, Dörthe
Zeitschriftenaufsatz
Journal Article
2014 Leichtbau - Trends und Zukunftsmärkte und deren Bedeutung für Baden-Württemberg
Studie
Study
2014 Leichtbaupotenziale durch faserverstärkte Schäume
Roch, A.; Menrath, Andreas; Huber, T.
Zeitschriftenaufsatz
Journal Article
2014 LFT foam - lightweight potential for semi-structural components through the use of long-glass-fiber-reinforced thermoplastic foams
Roch, A.; Huber, T.; Henning, F.; Elsner, P.
Konferenzbeitrag
Conference Paper
2014 Life cycle analysis within pharmaceutical process optimization and intensification: Case study of active pharmaceutical ingredient production
Ott, Denise; Kralisch, Dana; Dencic, Ivana; Hessel, Volker; Laribi, Yosra; Perrichon, Philippe D.; Berguerand, Charline; Kiwi-Minsker, Lioubov; Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2014 Lightweight Wheel. Lightweight Wheel-Phase 2_1 and 2_1_ext
Bücheler, David
Bericht
Report
2014 Lignin matrix composites from natural resources - ARBOFORMR®
Nägele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffman, Emilia Regina; Eckl, Wilhelm; Eisenreich, N.
Aufsatz in Buch
Book Article
2014 Mapping nutrient resorption efficiencies of subarctic cryptogams and seed plants onto the Tree of Life
Lang, Simone I.; Aerts, Rien; Logtestijn, Richard S.P. van; Schweikert, Wenka; Klahn, Thorsten; Quested, Helen M.; Hal, Jürgen R. van; Cornelissen, Johannes H.C.
Zeitschriftenaufsatz
Journal Article
2014 Mass spectrometric investigation of ethanol and acetaldehyde adsorbates electrooxidation on Pt electrocatalyst
Bach Delpeuch, A.; Chatenet, M.; Cremers, Carsten; Tübke, Jens
Zeitschriftenaufsatz
Journal Article
2014 Mechanistic aspects of protein corona formation: Insulin adsorption onto gold nanoparticle surfaces
Grass, S.; Treuel, L.
Zeitschriftenaufsatz
Journal Article
2014 Medium-high resolution electrochemical genotyping of HLA-DQ2/DQ8 for detection of predisposition to coeliac disease
Joda, Hamdi; Beni, Valerio; Alakulppi, Noora; Partanen, Jukka; Lind, Kristina; Strömbom, Linda; Latta, Daniel; Höth, Julian; Katakis, Ioanis; O'Sullivan, Ciara K.
Zeitschriftenaufsatz
Journal Article
2014 Messsystem zur Ermittlung der Ausbreitung von Gefahrstoffen in kritischen Infra- und komplexen Gebäudestrukturen zur Vermeidung ziviler Katastrophen (MAusKat)
Potje-Kamloth, Karin; Welzel, Knut; Besold, Matthias
Bericht
Report
2014 Metal nanopowders : production, characterization, and energetic applications
Sammelband
Anthology
2014 Micro reactor hydrogen production from ethylene glycol reforming using Rh catalysts supported on CeO2 and La2O3 promoted alpha-Al2O3
Izquierdo, U.; Wichert, Martin; Kolb, Gunther; Barrio, V.L.; Zapf, Ralf; Ziogas, Athanassios; Neuberg, Stefan; Arias, P.L.; Cambra, J.F.
Zeitschriftenaufsatz
Journal Article
2014 Micro-morphology of nitrocellulose in gun propellants
Böhnlein-Mauß, Jutta; Helfrich, Mathias
Konferenzbeitrag
Conference Paper
2014 Microfluidic flow cytometry based on spatially modulated excitation with self-aligning and calibration free optical interface for circulating tumor cell detection
Quint, Stephan; Schott, Lisa; Wittek, Joern; Spang, Peter; Walther, Thomas; Baßler, Michael
Konferenzbeitrag
Conference Paper
2014 Microstructure of NC-propellants investigated by x-ray diffraction (Part II)
Herrmann, Michael; Förter-Barth, Ulrich; Kaiser, Manfred; Kupzik, Klaus; Scheibel, Rudolf
Konferenzbeitrag
Conference Paper
2014 Microwave heated beads as selective adsorbents for large volume sampling
Heil, Moritz; Hürttlen, Jürgen; Bunte, Gudrun; Krause, Horst
Konferenzbeitrag
Conference Paper
2014 Microwave transparent falling film microreactor
Krtschil, Ulrich; Schütt, Christian; Löb, Patrick
Konferenzbeitrag
Conference Paper
2014 Mikrowellentransparenter Fallfilmmikroreaktor
Krtschil, U.; Schütt, C.; Löb, P.
Zeitschriftenaufsatz
Journal Article
2014 Miniaturisierter GlidArc®-Plasmareformer und Methanreformierung auf der Basis perovskitischer Katalysatoren
Spasova, Berta
Dissertation
Doctoral Thesis
2014 Model of a vanadium redox flow battery with an anion exchange membrane and a Larminie-correction
Wandschneider, F.T.; Finke, D.; Grosjean, S.; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Nirschl, H.
Zeitschriftenaufsatz
Journal Article
2014 Modeling ignition and thermal wave progression in binary granular pyrotechnic compositions
Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Eisenreich, Norbert
Zeitschriftenaufsatz
Journal Article
2014 Modelling of the consumption of a dye used to probe the decomposition of nitrocellulose
Bohn, Manfred A.; Moniruzzaman, Mohammed; Bellerby, John
Vortrag
Presentation
2014 Modification of the mechanical granule properties via internal structure
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan
Zeitschriftenaufsatz
Journal Article
2014 Monitoring of reinforced composites processed by microwave radiation using fiber-Bragg gratings
Barrera, D.; Roig, I.; Sales, S.; Emmerich, R.
Konferenzbeitrag
Conference Paper
2014 Multifunctional composites
Hübner, Christof
Zeitschriftenaufsatz
Journal Article
2014 Multifunctional composites based on polypropylene with excellent electrical, thermal and structural properties
Hübner, C.; Sathyanarayana, S.
Konferenzbeitrag
Conference Paper
2014 Multiple headspace extraction for gas detection in ionic liquids
Müller, Dominik; Fühl, Matthias; Pinkwart, Karsten; Baltes, Norman
Zeitschriftenaufsatz
Journal Article
2014 Multipurpose flow system integration into container-like production infrastructure
Löb, Patrick; Rehm, Thomas H.; Ghaini, Aras; Kost, Hans-Joachim; Illg, Tobias; Lang, Jürgen; Richert, Hannes
Konferenzbeitrag
Conference Paper
2014 Nanometals in energetic systems: Achievements and future
Gromov, A.; DeLuca, L.T.; Il'in, A.P.; Teipel, Ulrich; Petrova A.; Prokopiev, D.
Zeitschriftenaufsatz
Journal Article
2014 Neue Composite-Raketenfesttreibstoffe für taktische Raketenantriebe - rauchfrei, schnellbrennend und leistungsstark
Gettwert, Volker; Keicher, Thomas; Heintz, Thomas; Weiser, Volker
Aufsatz in Buch
Book Article
2014 Neue Verfahren zur Verwertung von Verbundwerkstoffen
Woidasky, Jörg M.
Konferenzbeitrag
Conference Paper
2014 New energetic thermoplastic elastomers for pressed explosive charges
Holler, Marcel; Keicher, Thomas; Gerber, Peter; Happ, Andreas; Klapötke, Thomas M.; Stierstorfer, Jörg
Konferenzbeitrag
Conference Paper
2014 New version of the ICT-thermodynamic code
Kelzenberg, Stefan; Kempa, Paul-Bernd; Wurster, Sebastian; Herrmann, Michael; Fischer, Thomas
Konferenzbeitrag
Conference Paper
2014 Nitration chemistry in continuous flow using acetyl nitrate
Antes, Jürgen; Janitschek, Wieland; Keicher, Thomas; Löbbecke, Stefan
Konferenzbeitrag
Conference Paper
2014 Noch weniger Gewicht
Keckl, Christoph; Kuppinger, Jan; Henning, Frank
Zeitschriftenaufsatz
Journal Article
2014 Numerical investigation on the structural mechanics of a joining technique for composite materials: The redundant high efficiency assembly
Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Drechsler, K.
Konferenzbeitrag
Conference Paper
2014 On the kinetics of AlH3 decomposition and the subsequent Al oxidation
Eisenreich, N.; Keßler, Armin; Koleczko, Andreas; Weiser, Volker
Zeitschriftenaufsatz
Journal Article
2014 On-line vs off-line electrical conductivity characterization. Polycarbonate composites developed with multiwalled carbon nanotubes by compounding technology
Llorens-Chiralt, R.; Weiss, P.; Mikonsaari, I.
Konferenzbeitrag
Conference Paper
2014 Overview of the German gel propulsion technology program
Ciezki, H.K.; Negri, M.; Hürttlen, J.; Weiser, V.; Naumann, K.W.; Ramsel, J.
Konferenzbeitrag
Conference Paper
2014 Palladium catalyzed carbon-carbon cross coupling reactions in thermoregulated double emulsions
Misuk, Viktor; Mai, Andreas; Rauber, Daniel; Giannopoulos, Konstantinos; Lohse, Andre; Karl, Dominik; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Particle size adjustment of spherical ammonium dinitramide particles (ADN-Prills) produced by emulsion crystallization
Heintz, Thomas; Reinhard, Werner; Birke, Christoph; Leisinger, Karlfred
Konferenzbeitrag
Conference Paper
2014 Partikeltechnologie
Teipel, Ulrich; Weber, A.
Editorial
2014 Passivation of Metal Nanopowders
Gromov, A.; Il'in, A.; Teipel, Ulrich; Pautova, J.
Aufsatz in Buch
Book Article
2014 Photocatalysis with visible light : A sustainable application for the falling film microreactor
Rehm, Thomas H.; Löb, Patrick
Konferenzbeitrag
Conference Paper
2014 Photokatalyse mit sichtbarem Licht - eine nachhaltige Anwendung für den Fallfilm-Mikroreaktor
Rehm, Thomas H.; Poeschel, Martin; Löb, Patrick
Zeitschriftenaufsatz
Journal Article
2014 Physicochemical characterization of nanoparticles and their behavior in the biological environment
Treuel, Lennart; Eslahian, Kyriakos A.; Docter, Dominic; Lang, Thomas; Zellner, R.; Nienhaus, K.; Nienhaus, G. Ulrich; Stauber, Roland H.; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2014 Piezoaktoren beschleunigen die Fertigung von Präzisionsbauteilen
Arnold, Steffen; Neumann, Frank; Reiff, Ellen-Christine
Zeitschriftenaufsatz
Journal Article
2014 Piezoaktoren beschleunigen die Mikrostrukturierung
Arnold, Steffen; Neumann, Frank; Reiff, Ellen-Christine
Zeitschriftenaufsatz
Journal Article
2014 Piezoaktoren beschleunigen die Mikrostrukturierung
Arnold, Steffen; Neumann, Frank; Reiff, Ellen-Christine
Zeitschriftenaufsatz
Journal Article
2014 Piloting of an intensified epoxidation process step at 10 kg/h in a modular miniplant using modular microstructured reactors and demonstration of future potentials
Kirschneck, D.; Linhart, W.; Löb, P.; Krtschil, U.
Konferenzbeitrag
Conference Paper
2014 Polymer janus nanoparticles with two spatially segregated functionalizations
Urban, Markus; Freisinger, Birger; Ghazy, Omayma; Staff, Roland; Landfester, Katharina; Crespy, Daniel; Musyanovych, Anna
Zeitschriftenaufsatz
Journal Article
2014 Polymer micro- and nanocapsules as biological carriers with multifunctional properties
Musyanovych, Anna; Landfester, Katharina
Zeitschriftenaufsatz
Journal Article
2014 Polymer-inorganic coatings containing nanosized sorbents selective to radionuclides.
Bratskaya, Svetlana; Mironenko, Alexander; Koivula, Risto; Synytska, Alla; Musyanovych, Anna; Simon, Frank; Marinin, Dmitry; Göbel, Michael; Harjula, Risto; Avramenko, Valentin
Zeitschriftenaufsatz
Journal Article
2014 Polymere Flammschutzmittel, Verfahren zu deren Herstellung und flammgeschützte Polymersysteme
Barner, Leonie; Eisenblätter, Jördis; Fehrenbacher, Ulrich; Barner-Kowollik, Christopher; Lang, Christiane
Patent
2014 Polymere: Synthese, Eigenschaften und Anwendungen
Koltzenburg, Sebastian; Maskos, Michael; Nuyken, Oskar; Mülhaupt, Rolf
Buch
Book
2014 Polymersomes and their biological implications
Bleul, Regina; Maskos, Michael
Aufsatz in Buch
Book Article
2014 PPaP: Past, Present and Perspectives
d'Agostino, Riccardo; Favia, Pietro; Oehr, Christian; Wertheimer, Michael R.; Förch, Renate
Editorial
2014 Pretreatment of biogenic raw materials
Chairopoulou, M.A.; Eisenlauer, M.; Teipel, U.; Schweppe, R.
Konferenzbeitrag
Conference Paper
2014 Problems and faulty uses with the Prout-Tompkins description of autocatalytic reactions and the solutions
Bohn, Manfred
Zeitschriftenaufsatz
Journal Article
2014 Process development of injection molded parts with wound fiber structures for local reinforcement
Heinzle, V.; Huber, T.; Henning, F.; Elsner, P.
Konferenzbeitrag
Conference Paper
2014 Process efficiency improvements for a structural doorframe support panel molded from unidirectional E-glass/polypropylene composite tapes
Eastep, D.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.
Konferenzbeitrag
Conference Paper
2014 Produktgestaltung mit Sekundärrohstoffen aus der Baustoff- und Keramikindustrie
Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Proximal detection of energetic materials on fabrics by UV-Raman spectroscopy
Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Mariani, L.; Angelini, F.; Menicucci, I.; Palucci, A.
Konferenzbeitrag
Conference Paper
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica

Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2014 Pultrusion of flax/poly(lactic acid) commingled yarns and nonwoven fabrics
Linganiso, L.Z.; Bezerra, R.; Bhat, S.; John, M.; Braeuning, R.; Anandjiwala, R.D.
Zeitschriftenaufsatz
Journal Article
2014 PVP-coated, negatively charged silver nanoparticles
Ahlberg, S.; Antonopulos, A.; Diendorf, J.; Dringen, R.; Epple, M.; Flöck, R.; Goedecke, W.; Graf, C.; Haberl, N.; Helmlinger, J.; Herzog, F.; Heuer, F.; Hirn, S.; Johannes, C.; Kittler, S.; Köller, M.; Korn, K.; Kreyling, W.G.; Krombach, F.; Lademann, J.; Loza, K.; Luther, E.M.; Malissek, M.; Meinke, M.C.; Nordmeyer, D.; Pailliart, A.; Raabe, J.; Rancan, F.; Rothen-Rutishauser, B.; Rühl, E.; Schleh, C.; Seibel, A.; Sengstock, C.; Treuel, L.; Vogt, A.; Weber, K.; Zellner, R.
Zeitschriftenaufsatz
Journal Article
2014 Quantification of local fiber distribution for optimization of tape laying techniques
Guglhoer, T.; Manger, F.; Sause, M.G.R.
Konferenzbeitrag
Conference Paper
2014 Quantifying cell-generated mechanical forces within living embryonic tissues
Campàs, Otger; Mammoto, Tadanori; Hasso, Sean; Sperling, Ralph; O'Connell, Daniel; Bischof, Ashley G.; Maas, Richard; Weitz, David A.; Mahadevan, L.; Ingber, Donald E.
Zeitschriftenaufsatz
Journal Article
2014 Raman Spectroscopy Study on the Addition of Peroxides as a Dispersing Additive in Multiwalled Carbone Nanotube Reinforced Polypropylene Composites
Sathyanarayana, S.; Olowojoba, G.; Hübner, C.; Diemert, J.; Pötschke, P.; Henning, F.
Konferenzbeitrag
Conference Paper
2014 Rapid deployable ballistic barriers based on airbag systems
Roussel Garcia, Raquel; Bernewitz, Johanna; Neutz, Jochen
Konferenzbeitrag
Conference Paper
2014 Reactions of magnesium in different atmospheres
Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel
Konferenzbeitrag
Conference Paper
2014 Reactions of metal carbides in different atmospheres
Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel
Konferenzbeitrag
Conference Paper
2014 Recent achievements in kinetic modeling of stabilizer consumption in NC-based propellants
Bohn, M.A.
Konferenzbeitrag
Conference Paper
2014 Recent achievements in kinetic modelling of stabilizer consumption and molar mass degradation in NC-based propellants
Bohn, Manfred A.
Konferenzbeitrag
Conference Paper
2014 Recent improvements within the testing and certification process of explosive detection systems as basis of a harmonized european test regime
Röseling, D.; Schnürer, F.; Heil, M.; Rieger, M.; Ulrich, C.; Krause, H.
Konferenzbeitrag
Conference Paper
2014 Recovering carbon fibers
Emmerich, Rudolf; Kuppinger, Jan
Zeitschriftenaufsatz
Journal Article
2014 Recycling von Weichschaumpolyurethan aus Flugzeugsitzen mittels Glykolyse
Hanich, Ronny
Master Thesis
2014 Reformer-Brennstoffzellen-APU-System für Freizeitfahrzeuge. Schlussbericht. Teilvorhaben: Massenfertigungstaugliches Reformersystem
Pennemann, H.; Kolb, G.; Wichert, M.; Wiborg, J.O.
Bericht
Report
2014 Reibenergieverteilungen von Mahlkugelkontakten
Köster, A.; Scherge, M.; Teipel, U.
Konferenzbeitrag
Conference Paper
2014 Reibenergieverteilungen von Mahlkugelkontakten
Köster, Alexander; Scherge, Matthias; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Schneller erodieren mit Vibrationsspindel
Reiff, Ellen-Christine; Arnold, Steffen; Neumann, Frank
Zeitschriftenaufsatz
Journal Article
2014 Simulation of propellant combustion using the ICT-cellular-combustion-algorithm (ICCA)
Wurster, S.; Fischer, T.S.
Konferenzbeitrag
Conference Paper
2014 Size effects of self-assembled block copolymer spherical micelles and vesicles on cellular uptake in human colon carcinoma cells
Chang, T.; Lord, M.S.; Bergmann, B.; Macmillan, A.; Stenzel, M.H.
Zeitschriftenaufsatz
Journal Article
2014 Size influences the effect of hydrophobic nanoparticles on lung surfactant model systems
Dwivedi, Mridula V.; Harishchandra, Rakesh Kumar; Koshkina, Olga; Maskos, Michael; Galla, Hans-Joachim
Zeitschriftenaufsatz
Journal Article
2014 Size Matters! On the way to ionic liquid systems without ion pairing
Rupp, A.; Roznyatovskaya, Nataliya; Scherer, H.; Beichel, W.; Klose, P.; Sturm, C.; Hoffmann, A.; Tübke, Jens; Koslowski, T.; Krossing, I.
Zeitschriftenaufsatz
Journal Article
2014 Snow as a paradigm for acoustic absorbers
Maysenhölder, Waldemar; Mikonsaari, Irma
Konferenzbeitrag
Conference Paper
2014 Solid state electrolytes for ambient and middle temperature next generation electrochemical storage systems
Ahlbrecht, K.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J.
Konferenzbeitrag
Conference Paper
2014 Special section: Fuel processing for hydrogen production. Editorial
Kolb, Gunther; Berry, David A.; Shekhawat, Dushyant
Editorial
2014 Specific aspects of catalyst, reactor and system design for microreactors in distributed energy related applications
Kolb, Gunther
Konferenzbeitrag
Conference Paper
2014 Specific salt effects on thermophoresis of charged colloids
Eslahian, Kyriakos A.; Majee, Arghya; Maskos, Michael; Würger, Alois
Zeitschriftenaufsatz
Journal Article
2014 Spectroscopy of pyrotechnic tracer compositions under different pressure
Weiser, Volker; Knapp, Sebastian; Roth, E.; Raab, Angelika; Kelzenberg, Stefan; Cegiel, D.
Konferenzbeitrag
Conference Paper
2014 Structure formation of polymeric building blocks: Complex polymer architectures
Binder, Kurt; Butt, Hans-Jürgen; Floudas, George; Frey, Holger; Hsu, Hsiao-Ping; Landfester, Katharina; Kolb,Ute; Kühnle, Angelika; Maskos, Michael; Müllen, Klaus; Paul, Wolfgang; Schmidt, Manfred; Spiess, Hans Wolfgang; Virnau, Peter
Aufsatz in Buch
Book Article
2014 Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes
Hagen, M.; Quiroga-González, E.; Dörfler, S.; Fahrer, G.; Tübke, J.; Hoffmann, M.J.; Althues, H.; Speck, R.; Krampfert, M.; Kaskel, S.; Föll, H.
Zeitschriftenaufsatz
Journal Article
2014 Studying the Segré- Silberberg effect by velocimetry in microfluidic channels
Sommer, Christian; Quint, Stephan; Spang, Peter; Walther, Thomas; Baßler, Michael
Konferenzbeitrag
Conference Paper
2014 Sustainable syngas production from ethylene glycol reforming processes using Rh-based catalysts in microreactors
Izquierdo, U.; Wichert, Martin; Barrio, V.L.; Kolb, Gunther
Zeitschriftenaufsatz
Journal Article
2014 Synchronized reinjection and coalescence of droplets in microfluidics
Lee, Manhee; Collins, Jesse W.; Aubrecht, Donald M.; Sperling, Ralph; Solomon, Laura; Ha, Jong-Wook; Yi, Gi-Ra; Weitz, David A.
Zeitschriftenaufsatz
Journal Article
2014 Synthesis and characterization of polymers with phosphorus side chains
Eisenblätter, Jördis
Dissertation
Doctoral Thesis
2014 Synthesis and properties of random co-polymer poly-(GA/BAMO) as energetic binder
Keicher, Thomas; Janitschek, Wieland; Schaller, Uwe; Krause, Horst; Kaiser, Manfred
Konferenzbeitrag
Conference Paper
2014 Synthesis and surface immobilization of antibacterial hybrid silver-poly(l-lactide) nanoparticles
Taheri, Shima; Baier, Grit; Majewski, Peter; Barton, Mary; Förch, Renate; Landfester, Katharina; Vasilev, Krasimir
Zeitschriftenaufsatz
Journal Article
2014 Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from air
Bunte, G.; Hürttlen, J.; Heil, M.; Rieger, M.; Krause, H.
Konferenzbeitrag
Conference Paper
2014 Synthesis gas production from methane and propane in a miniaturized GlidArc® reformer
Spasova, Berta; Tiemann, David; O'Connell, Martin; Ziogas, Athanassios; Kolb, Gunther; Hessel, Volker
Zeitschriftenaufsatz
Journal Article
2014 Synthesis of biodiesel in microstructured reactors under supercritical reaction conditions
Schürer, Jochen; Thiele, Richard; Wiborg, Jens Ole; Ziogas, Athanassios; Kolb, Gunther
Konferenzbeitrag
Conference Paper
2014 Synthesis of N-methyl amino acids in a flow tube-in-tube reactor with a gas-liquid/liquid-liquid semi-permeable membrane
Buba, Annette E.; Koch, Stefan; Kunz, Horst; Löwe, Holger
Konferenzbeitrag
Conference Paper
2014 Synthesis of polymer particles and capsules employing microfluidic techniques
Boskovic, Dusan; Löbbecke, Stefan
Zeitschriftenaufsatz
Journal Article
2014 The development of a modular synthesis of teraryl-based alpha-helix mimetics as potential inhibitors of protein-protein interactions
Trobe, M.; Peters, M.; Grimm, S.H.; Breinbauer, R.
Zeitschriftenaufsatz
Journal Article
2014 The equilibrium velocity of spherical particles in rectangular microfluidic channels for size measurement
Sommer, Christian; Quint, Stephan; Spang, Peter; Walther, Thomas; Baßler, Michael
Zeitschriftenaufsatz
Journal Article
2014 The protein corona protects against size- and dose-dependent toxicity of amorphous silica nanoparticles
Docter, Dominic; Bantz, Christoph; Westmeier, Dana; Galla, Hajo J.; Wang, Qiangbin; Kirkpatrick, C. James; Nielsen, Peter; Maskos, Michael; Stauber, Roland H.
Zeitschriftenaufsatz
Journal Article
2014 The surface properties of nanoparticles determine the agglomeration state and the size of the particles under physiological conditions
Bantz, Christoph; Koshkina, Olga; Lang, Thomas; Galla, Hans-Joachim; Kirkpatrick, C. James; Stauber, Roland H.; Maskos, Michael
Zeitschriftenaufsatz
Journal Article
2014 Thermal decomposition of nano-structured carbon
Eisenreich, Norbert; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike; Weiser, Volker
Konferenzbeitrag
Conference Paper
2014 Thermoplastische Faserverbundkunststoffe - Vom Tape zum strukturellen Bauteil am Beispiel eines Versteifungsinlays für eine LKW-Staufachklappe
Baumgärtner, S.; Henning, F.; Joppich, T.; Hangs, B.; Huber, T.; Manger, F.; Begert, M.; Reif, M.
Konferenzbeitrag
Conference Paper
2014 Thermostatted micro-reactor NMR probe head for monitoring fast reactions
Brächer, A.; Hoch, S.; Albert, K.; Kost, Hans-Joachim; Werner, Bernd; Harbou, E. von; Hasse, H.
Zeitschriftenaufsatz
Journal Article
2014 Trikresylphoshat-freies Öl, Schmierstoff oder Turbinenöl
Schmid, Helmut; Eckl, Wilhelm; Moriske, Heinz-Jörn
Patent
2014 Umweltfreundliche, wärmeformbeständige Profile
Moser, Kevin; Holzer, Andrei; Bergmann, Björn
Zeitschriftenaufsatz
Journal Article
2014 Untersuchung der Thermophorese negativ geladener Modellkolloide in wässrigen Suspensionen mittels der Thermischen Feld-Fluss Fraktionierung
Eslahian, Kyriakos A.
Dissertation
Doctoral Thesis
2014 Use of unidirectional thermoplastic composite tapes to reduce mass & improve performance of a steel doorframe support on a commercial truck
Clark, G.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.
Konferenzbeitrag
Conference Paper
2014 Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur
Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
2014 Verfahren und Vorrichtung zum Nachweisen von ungelösten Teilchen in einem Fluid
Baßler, Michael; Sommer, Christian; Quint, Stephan; Spang, Peter
Patent
2014 Verfahren und Vorrichtung zur Bestimmung eines Rohstoffgehaltes in einem Gebäude
Woidasky, Jörg; Sevilmis, Neyir; Ritz, Martin
Patent
2014 Verfahren und Vorrichtung zur Bestimmung von ungelösten Teilchen in einem Fluid
Baßler, Michael; Sommer, Christian; Quint, Stephan; Spang, Peter
Patent
2014 Verfahren und Vorrichtung zur Ermittlung der Zündgrenzen von Gasgemischen
Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas
Patent
2014 Verfahren zur Detektion von strahlungsemittierenden Partikeln
Quint, Stephan; Baßler, Michael
Patent
2014 Verfahren zur Herstellung eines elektrisch leitfähigen Kunststoff-Werkstoffes und dessen Verwendung sowie solchermaßen hergestellter Kunststoff-Werkstoff
Diemert, Jan; Hübner, Christof; Sathyanarayana, Shyam; Weiss, Patrick; Just, Daniel
Patent
2014 Verfahren zur Herstellung eines Polyurethan-Blockschaumstoffes
Hohenhorst, Manfred; Kugler, Michael; Fehrenbacher, Ulrich; Stricker, Matthias; Schäfer, Kai; Giesker, Christian
Patent
2014 Verfahren zur Rückgewinnung von Fasern aus Bauteilen oder Produkten aus Kunststoff-Faserverbundmaterialien
Woidasky, Jörg; Seiler, Elisa
Patent
2014 Vorrichtung zur Herstellung von thermoplastischen und/oder thermoelastischen Polymer-Formteilen
Diemert, Jan; Huber, Timo; Roch, Alexander; Anselment, Christian
Patent
2014 Wegweisend: Fertigung thermoplastischer und duromerer Bauteile aus Faserverbundkunststoffen
Baumgärtner, Sebastian; Joppich, Tobias
Aufsatz in Buch
Book Article
2014 Wertschöpfungspotenziale im Leichtbau und deren Bedeutung für Baden-Württemberg
Studie
Study
2014 Wind Blades Using Cost-Effective Advanced Lightweight Design
Heinzle, V.; Rapp, F.; Huber, T.; Knudsen, H.
Konferenzbeitrag
Conference Paper
2014 X-ray-absorption measurements of explosives and the effective atomic number ZEFF
Herrmann, Michael; Förter-Barth, Ulrich; Heintz, Thomas; Röseling, Dirk; Krause, H.
Konferenzbeitrag
Conference Paper
2014 Zur Energie der Mahlkörperreibung
Köster, A.; Scherge, M.; Teipel, Ulrich
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica