Publications

Fraunhofer-Publica

In the database »Fraunhofer-Publica« all publications made by Fraunhofer are available for your research.

»Fraunhofer-Publica« is a multidisciplinary database in which publications of the Fraunhofer-Gesellschaft, its institutes and its employees are listed.

With well over 100,000 titles, it represents the entire research spectrum of the Fraunhofer-Gesellschaft. Approximately 8,000 new publications are added every year.

The following documents are included in the Fraunhofer-Publica database:

Books
Magazine articles
Articles from books or conferences
Conference proceedings
Dissertations
Research reports
Patents

The database Fraunhofer-Publica is created by FhG-Online on behalf of the headquarters of the Fraunhofer-Gesellschaft, in cooperation with the Fraunhofer institutes and their libraries.

Below you can find a list of all publications made by Fraunhofer ICT during the past five years.

Publications from 2020

Here you can find all publications made by Fraunhofer ICT in 2020.

Year	Title/Author	Document Type
2020	Active and Passive Optical Fiber Metrology for Detonation Velocity Measurements Quaresma, Joana; Deimling, Lukas; Campos, Jose; Mendes, Ricardo	Journal Article full text
2020	Anionic Polymerization of ε-Caprolactam under the Influence of Water: 2. Kinetic Model Wendel, Rainer; Rosenberg, Philipp; Wilhelm, Michael; Henning, Frank	Journal Article full text
2020	Aspects of electron transfer processes in vanadium redox-flow batteries Roznyatovskaya, Nataliya; Noack, Jens; Pinkwart, Karsten; Tübke, Jens	Journal Article full text
2020	Beitrag zur Kristallisationsoptimierung von Poly(L-Lactid) (PLLA) und Grundlagen zur Validierung einer Methode zur Inline-Charakterisierung des Kristallisationsverlaufs im Spritzgießprozess Moser, Kevin	Dissertation
2020	Characterization of influencing parameters in the robot-based filament winding process on a skeleton structure with thermoset pre-impregnated carbon fiber tows Duan, Jinmin; Henning, Frank (Supervisor); Wilhelm, Michael (Supervisor)	Master Thesis
2020	Compensation of Water Influence on Anionic Polymerization of ε-Caprolactam: 1. Chemistry and Experiments Wilhelm, Michael; Wendel, Rainer; Aust, Martin; Rosenberg, Philipp; Henning, Frank	Journal Article full text
2020	Corona - Mechanistik, Kinetik, Modellierung, Simulation und Vorhersage des Verlaufs in Deutschland: Präsentation am Fraunhofer-Institut für Chemische Technologie ICT, März 2020, Pfinztal Schmid, Helmut	Presentation full text
2020	Decomposition of ammonium dinitramide (ADN) elucidated by quantum chemical computations Lang, Johannes; Bohn, Manfred	Conference Paper
2020	Development of flow fields for zinc slurry air flow batteries Choi, N.H; Olmo, D. del; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens	Journal Article full text
2020	Evaluating Current Distribution and Influence of Defect Sites for Graphitic Compound Bipolar Plate Materials Baumann, Nils; Blankenship, A.; Dorn, M.; Cremers, Carsten	Journal Article full text
2020	Funktionalisierung aromatischer Diamine aus dem chemischen PUR-Recycling Springsklee, Lukas	Master Thesis
2020	Handbuch Leichtbau. Methoden, Werkstoffe, Fertigung. 2., überarbeitete und erweiterte Auflage Henning, Frank; Möller, Elvira	Book
2020	Implications of Testing a Zinc-Oxygen Battery with Zinc Foil Anode Revealed by Operando Gas Analysis Dongmo, Saustin; Stock, Daniel; Jakob, Julian; Kreissl, Alexander; Groß, Martin; Weixler, Sophie; Hagen, Markus; Miyazaki, Kohei; Abe, T.; Schröder, D.	Journal Article full text
2020	Influence of the Temperature on Coccolith-Containing Systems from Emiliania huxleyi Cultivations Chairopoulou, Makrina Artemis; Kratzer, Fabian; Gross, Roland; Herrmann, Michael; Teipel, Ulrich	Journal Article full text
2020	Jet Dispersion of Multiwall Carbon Nanotubes and Correlation with Suspension Rheology Dresel Alexander; Teipel, Ulrich	Journal Article full text
2020	Konzeptionierung und Analyse eines langfaserverstärkten Getriebedeckels für ein Elektrofahrzeug Zeller, Tobias	Master Thesis
2020	Mechanistic Insights into the Lithiation and Delithiation of Iron-Doped Zinc Oxide: The Nucleation Site Model Asenbauer, Jakob; Hoefling, Alexander; Indris, Sylvio; Tübke, Jens; Passerini, Stefano; Bresser, Dominic	Journal Article
2020	Messtechnische Charakterisierung und dynamische Simulation von Kunststoffbauteilen Georgi, Tom; Troge, Jan; Kranz, Burkhard; Diemert, Jan	Conference Paper full text
2020	Mikrowellenpyrolyse von carbonfaserhaltigen Kunststoffen als Recyclingoption Seiler, Elisa; Urban, Helfried; Teipel, Ulrich	Journal Article full text
2020	A novel approach for segmenting and mapping of local fiber orientation of continuous fiber-reinforced composite laminates based on volumetric images Schöttl, L.; Dörr, D.; Pinter, P.; Weidenmann, K.A.; Elsner, Peter; Kärger, L.	Journal Article
2020	A novel model predictive control scheme based observer for working conditions and reconditioning monitoring of Zinc-Nickel single flow batteries Li, Shawn; Li, Kang; Xiao, Evan; Xiong, Rui; Zhang, Jianhua; Fischer, Peter	Journal Article
2020	Novel SERS-based process analysis for label-free segmented flow screenings Mendl, Alexander; Köhler, Michael; Bošković, Dušan; Löbbecke, Stefan	Journal Article full text
2020	Organische Sulfide und Disulfide von s-Triazin und s-Heptazin und deren Potential als Flammschutzmittel Höhne, Carl-Christoph	Dissertation full text
2020	Ortsaufgelöste Untersuchungen an Redox-Flow-Batterien Gerber, Tobias; Tübke, J.; Langen, C.; Wetzel, T.	Dissertation
2020	PEM‐Fuel Cell Catalyst Behavior between Room Temperature and Freezing Point Kunkel, Robin; Baumann, Nils; Jurzinsky, Till; Cremers, Carsten	Journal Article full text
2020	Processing relationships of hybrid polymer-metal composites in the injection moulding process Schwarz, Angela; Liebig, Wielfried; Weidenmann, Kay; Elsner, Peter	Conference Paper full text
2020	Rohstoffinnovationen und Rohstoffeffizienz. Editorial Teipel, Ulrich; Schweppe, Rainer	Journal Article
2020	Simultaneous identification of wind turbine vibrations by using seismic data, elastic modeling and laser Doppler vibrometry Zieger, Toni; Nagel, S.; Lutzmann, Peter; Kaufmann, Ilja; Ritter, J.; Ummenhofer, T.; Knödel, P.; Fischer, Peter	Journal Article
2020	Strategies to Enhance Carbon Dioxide Capture in Metal-Organic Frameworks Piscopo, Calogero Giancarlo; Löbbecke, Stefan	Journal Article full text
2020	Synthesis of novel bisphosphorylimides based on Staudinger reaction Weber, Lais; Weinert, Michael; Goedderz, Daniela; Fuhr, Olaf; Döring, Manfred	Journal Article full text

This publication list has been generated from the publication database Fraunhofer-Publica.

Publications from 2019

Here you can find all publications made by Fraunhofer ICT in 2019.

Year	Title/Author	Document Type
2019	4-Amino-1-butyl-1,2,4-triazolium Nitrate - Synthesis and Characterization Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Hürttlen, Jürgen	Journal Article full text
2019	5. Symposium Rohstoffinnovationen und Rohstoffeffizienz 2019: 9./10. Mai 2019, Fraunhofer ICT, Pfinztal Teipel, Ulrich; Schweppe, Rainer ; Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal; Georg-Simon-Ohm-Hochschule, Nürnberg	Conference Proceedings
2019	60 Years of Fraunhofer ICT: 60 Years of Applied Research and Development in Energetic Materials and Systems: Editorial Elsner, Peter; Eckl, Wilhelm; Löbbecke, Stefan	Journal Article
2019	Application of azide-containing molecules as modifiers of HTPB: Synthesis and evaluation of properties Lemos, Mauricio Ferrapontoff; Mendes, Luis Claudio; Bohn, Manfred A.; Keicher, Thomas	Journal Article
2019	Assessing the structural integrity of carbon-fibre sandwich panels in fire: Bench-scale approach Schartel, B.; Humphrey, J.K.; Gibson, A.G.; Hörold, A.; Trappe, V.; Gettwert, Volker	Journal Article
2019	Auf dem Weg zu einer geräteflexiblen, automatisierten Datenauswertung von Batterien und Brennstofzellen ("Batalyse"): Vortrag gehalten auf dem Workshop Forschungsdatenmanagement und masch. Lernen in den Ingenieurwissenschaften, Karlsruhe, 20.11.2019 Hagen, Marcus; Nave, Eran; Tübke, Jens	Presentation full text
2019	Aufbau eines Versuchstandes zur Validierung der Strömungssimulation eines otto-motorischen Kühlkonzeptes, welcher nach SLM-Richtlinien entwickelt ist Abdelkefi, Mahdi; Maliha, Maliki (Betreuer); Michler, Tobias (Betreuer)	Master Thesis
2019	Aufbau und Inbetriebnahme der QCM-Messanlage als Screeningtool für die Adsorptionseigenschaften selektiver Materialien Souvannavong, Naryvone	Bachelor Thesis full text
2019	Auslegung und Aufbau eines T-History-Kalorimeters für die Charakterisierung von Phasenwechselmaterialien von -40°C bis 250°C Wegner, Jakob	Bachelor Thesis
2019	Beobachtung des Schädigungsverhaltens von Aluminiumkolben unter TMF- und überlagerter TMF/HCF-Belastung Vogt, Matthias; Elsner, Peter (Betreuer); Kuhlen, Karl Gerhard	Bachelor Thesis full text
2019	Betauung im Bereich der Umweltsimulation - Ein Beitrag zur Validierung des Normentwurfs [E] DIN EN 60068-2-84 Bott, P.; Schmitt, T.; Cäsar, Joachim	Conference Paper
2019	Cathode plasma electrolysis in diluted potassium hydroxide solutions: Particles formation and energetic estimation Gromov, Alexander; Nalivaiko, Anton; Fehn, Thomas; Yahya, Dewi Puspa Muhammad; Osipenkova, Alexandra; Koleczko, Andreas; Knapp, Sebastian; Teipel, Ulrich	Journal Article
2019	Characterizing of glass-rubber transition shift in filled HTPB-IPDI formulations by modified and normal Arrhenius equation Bohn, Manfred; Ferrapontoff, Mauricio; Mußbach, Günter	Conference Paper
2019	Chemical Kinetics of the Oxidation of Manganese and of the Decomposition of MnO2 by XRD and TG Measurements Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andrzej; Schuppler, Heike; Fietzek, Harald	Journal Article full text
2019	Coating of ammonium salt particles by fluidized bed processes Dresel, Alexander; Busch, Konstantin; Heintz, Thomas	Conference Paper full text
2019	Comprehensive determination of heat generation and thermal modelling of a hybrid capacitor Miller, Martin; Baltes, Norman; Rabenecker, Peter; Hagen, Marcus; Tübke, Jens	Journal Article
2019	The Connection Between the Parameters of WLF Equation and of Arrhenius Equation Bohn, Manfred	Journal Article full text
2019	Continuous Flow Desulfurization of a Model Fuel Catalysed by Titanium Functionalized UiO‐66 Piscopo, Calogero Giancarlo; Voellinger, L.; Schwarzer, Maud; Polyzoidis, Angelos; Bošković, Dusan; Löbbecke, Stefan	Journal Article full text
2019	Continuous microfluidic process for formation of ADN-Prills Radulescu, Ligia; Eberhardt, Angelika; Boskovic, Dusan	Conference Paper full text
2019	A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics Dörr, Dominik; Joppich, Tobias; Kugele, Daniel; Henning, Frank; Kärger, Luise	Journal Article
2019	Customized Design of Scalable Microfluidic Droplet Generators Using Step-Emulsification Methods Eberhardt, Angelika; Boskovic, Dusan; Löbbecke, Stefan; Panic, Slobodan; Winter, Yannik	Journal Article full text
2019	Deaktivierbare Klebstoffe zur Wiederverwertung von Wärmedämmverbundsystemen -WDVS-Deaktiv-: Abschlussbericht bei Zukunft Bau Sims, Stefan; Urban, Helfried; Stier, Christian	Report
2019	Decomposition kinetics of RDX in cyclohexanone and gamma-butyrolactone determined with ARC and HFMC: Presentation held at Insensitive Munitions and Energetic Materials Technology Symposium, IMEMTS 2019, October 21-24, 2019, Sevilla, Spain Bohn, Manfred A.	Presentation full text
2019	Design and development of an electrolyte regeneration process for vanadium redox flow batteries Poli, Nicola	Master Thesis
2019	Design und Materialcharakterisierung poröser Transportschichten für die PEM-Wasserelektrolyse Ernst, Matthias; Tübke, Jens; Baumann, Nils (Betreuer)	Master Thesis
2019	Design, manufacturing and mechanical investigation of a complex structural PPS injection molded part with 3D wound continuous fibers reinforcement Tawfik, Hussam; Henning, Frank (Betreuer); Beck, Björn	Master Thesis
2019	Designverifikation eines hochausgenutzten Elektromotors mit innenliegender Kühlung und duroplastischem Leichtbaugehäuse Suppanz, Joseph; Dollinger, Andreas; Jux, Benedict (Betreuer); Langheck, Andreas (Betreuer)	Master Thesis
2019	Detection of unstable process conditions during continuous nitrate ester production Mendl, Alexander; Panic, Slobodan; Klahn, Thorsten; Boskovic, Dusan	Conference Paper full text
2019	Development of a property forecast tool for flexible compositions of Li-ion batteries, including raw material availability and price forming Krsmanovic, Dejana; Hagen, M.; Brant, W.; Munkhammar, J.	Master Thesis
2019	Digitale Zwillinge Cäsar, Joachim	Conference Paper
2019	Dispergierung und rheologische Eigenschaften von Carbon Nanotube-Suspensionen Dresel, Alexander	Dissertation
2019	Distribution of nitroglycerine in different ball propellants - chemometric evaluation Kaiser, Mannfred; Schweikert, Wenka; Boskovic, Dusan	Conference Paper full text
2019	Dithiocyanurates and thiocyamelurates: Thermal thiyl radical generators as flame retardants in polypropylene Höhne, Carl-Christoph; Posern, C.; Böhme, U.; Eichler, F.; Kroke, E.	Journal Article
2019	Dreidimensionale Faserskelette: Lokale Endlosfaserverstärkung durch die 3D-Skelett-Wickeltechnik Beck, Björn; Haas, Jonathan; Tawfik, Hussam	Journal Article
2019	Durchgangswiderstand von Staubschüttungen - Messverfahren und Einflussgrößen Teipel, Ulrich; Wolf, Sebastian; Schreiber, Alex	Conference Paper
2019	Effects on Progression Rate of Thermite Pellets Knapp, Sebastian; Kelzenberg, Stefan; Becker, Wolfgang; Lity, André; Roth, Evelin; Wacker, Karin; Weiser, Volker	Conference Paper full text
2019	Einsetzbarkeit der Biopolyole aus Pflanzenölen auf der Darstellung von PUR-Weichschaum: Mittels Ökobilanzierung und ökonomischer Abschätzung Zhang, Lin	Master Thesis
2019	Electrochemical stability of silica-templated polyaniline-derived mesoporous N-doped carbons for the design of Pt-based oxygen reduction reaction catalysts Melke, Julia; Schuster, Robin; Möbus, Sascha; Jurzinsky, Tilman; Elsässer, Patrick; Heilemann, Axel; Fischer, Anna	Journal Article
2019	Emission Spectroscopy of the Combustion Flame of Aluminium/Copper Oxide Thermite Knapp, Sebastian; Kelzenberg, Stefan; Raab, Angelika; Roth, Evelin; Weiser, Volker	Journal Article
2019	Energetic materials. Past, present and future: 50th International Annual Conference of the Fraunhofer ICT, June 25-28, 2019, Convention Center, Karlsruhe, Germany Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Conference Proceedings
2019	Entwicklung einer Methode zur Charakterisierung der oberflächlichen makroskopischen Rovingorientierung bei unidirektional endlosfaserverstärkten Verbundwerkstoffen Sauerwein, Vladimir	Master Thesis
2019	Entwicklung einer RTM Prozessvariante zur kavitätsdruckgeregelten Herstellung von Faserverbundstrukturbauteilen Rosenberg, Philipp	Dissertation full text
2019	Entwicklung eines Verbrennungsmodells für wasseremulgierte Flüssigbrennstoffe Baust, Tobias Michael; Zarzalis, Nikolaos (Erstgutachter); Suntz, Rainer (Zweitgutachter)	Dissertation full text
2019	Environment-Friendly Composite Propellants Based on Ammonium Dinitramide Gettwert, Volker; Weiser, Volker; Tagliabue, Claudio; Hafner, Sven; Fischer, Sebastian	Journal Article
2019	Environmental factors and their impact on the transition, safety and function of selected processes, systems and products Schmid, Helmut	Conference Paper
2019	Experimental and numerical study of the spring-in of angled brackets manufactured using different resins and fiber textiles Bernath, A.; Groh, F.; Exner, W.; Hühne, C.; Henning, F.	Journal Article full text
2019	An experimental and numerical survey into the potential of hybrid foams Hohe, Jörg; Beckmann, Carla; Böhme, Wolfgang; Weise, Jörg; Reinfried, Matthias; Luthardt, Fabian; Rapp, Florian; Diemert, Jan	Journal Article
2019	Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process Rupp, Peter; Elsner, Peter; Weidenmann, K.A.	Journal Article
2019	Fast processing and continuous simulation of automotive structural composite components Henning, F.; Kärger, L.; Dörr, D.; Schirmaier, F.J.; Seuffert, J.; Bernath, A.	Journal Article
2019	Fractionation of three different lignins by thermal separation techniques: A comparative study Rohde, Viktoria; Böringer, Sarah; Tübke, Beatrice; Adam, Christian; Dahmen, Nicolaus; Schmiedl, Detlef	Journal Article full text
2019	Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2018/2019 Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Annual Report full text
2019	Functionalization of multi-walled carbon nanotubes with indazole Jurzinsky, T.; Gomez-Villa, E.D.; Kübler, M.; Bruns, M.; Elsässer, P.; Melke, J.; Scheiba, F.; Cremers, C.	Journal Article
2019	Funktionsintegrierte Duromere Faserverbundwerkstoffe für neue Anwendungen: Enthält zwei Beiträge: Lokale Endlosfaserverstärkung von Sheet Molding Compound für den Einsatz im Automobilbau sowie Leichtbau im Antriebsstrang durch die Verwendung von duromeren, faserverstärkten Formmassen Griesbaum, Patrick; Ilinzeer, Sergej; Maertens, Robert; Laux, Marcel	Journal Article full text
2019	Funktionsprototypenentwicklung von Wärmespeichersystemen mittels Fused Filament Fabrication Salehi, Simon	Bachelor Thesis
2019	Grundlagen und Verfahren zur profilierten Erwärmung von PET-Preforms mit Mikrowellen Graf, Matthias Harald; Elsner, P.; Jelonnek, J.	Dissertation
2019	Herstellung und Eigenschaften neuartiger Compounds zur additiven Fertigung poröser Transportschichten für die PEM-Wasserelektrolyse Maletzko, Annabelle; Tübke, Jens (Betreuer); Höhne, Carl-Christoph (Betreuer); Guber, Andreas (Gutachter)	Master Thesis
2019	Herstellung, Optimierung und Charakterisierung von thermoplastischen Schaumstoffen, vor dem Hintergrund der Einstellbarkeit von Zellgröße und Offenzelligkeit Hofmann, Heiko	Master Thesis
2019	HMX crystal topography investigated by means of atomic force microscopy and confocal microscopy Herrmann, Michael; Weyrauch, Hubert	Conference Paper full text
2019	Hochleistungsfähige und alterungsstabile HT-PEMFC Membranelektrodeneinheiten durch neue Anbindungskonzepte Katalysator/Träger/Protonenleiter (HT-Linked): Teilvorhaben "Membran-Elektrodeneinheiten und Testung" Cremers, Carsten; Jurzinsky, Tilman; Baumann, Nils	Report full text
2019	Hybrid Composites for Automotive Applications - Development and Manufacture of a System-integrated Lightweight floor Structure in multi-material Design Link, Tobias; Behnisch, Felix; Rosenberg, Philipp; Seuffert, Julian; Dörr, Dominik; Hohberg, Martin; Joppich, Tobias; Henning, Frank	Conference Paper full text
2019	Igniter Compositions for Lova and Double-Base Propellants Containing Weiser, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Roth, Evelin	Journal Article
2019	Ignition of flare propellants using AL/NI-Nanofoils at sub-atmospheric pressure Weiser, Volker; Roth, Evelin; Knapp, Sebastian; Lity, A.	Conference Paper full text
2019	Improving the Processability of Graphene Nanoplatelets in Polyamide 6 during Melt Compounding Extrusion Blanco-Villalba, José Francisco; Recio, Imanol; Gómez-Cordón, Julio; Hübner, Christof	Conference Paper
2019	Influence of glyoxal on curing of urea-formaldehyde resins Perminova, D.A.; Malkov, V.S.; Gusсhin, V.; Eisenreich, N.	Journal Article
2019	Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior Wittemann, Florian; Märtens, Robert; Kärger, Luise; Henning, Frank	Journal Article
2019	Die Integration von Fragestellungen der Circular Economy in die Ökobilanzierung: Anwendung der Life Cycle Gap Analyse mittels industriellem Fallbeispiel Dieterle, Michael; Viere, Tobias	Book Article full text
2019	Interaction parameters in plasticizer-plasticizer-mixtures Mitró, Daniel; Böhnlein-Mauß, Jutta; Pfatteicher, Axel	Conference Paper full text
2019	Interpreting LCA results from a life cycle and circular economy perspective: Application of the life cycle gap-analysis Dieterle, Michael; Viere, Tobias	Abstract full text
2019	Investigation of Crystallisation Conditions to Produce CL-20/HMX Cocrystal for Polymer-bonded Explosives Herrmannsdörfer, Dirk; Gerber, Peter; Heintz, Thomas; Herrmann, Michael; Klapötke, Thomas	Journal Article full text
2019	Investigation of the microstructure of ADN-Prills using 2D-X-Ray diffraction Kempa, Paul-Bernd; Fietzek, Harald; Herrmann, Michael; Heintz, Thomas	Conference Paper full text
2019	Investigations of ETPE formulations for additive manufacturing Schaller, Uwe; Mitró, Daniel; Böhnlein-Mauß, Jutta; Keicher, Thomas	Conference Paper full text
2019	Kinetic study on some cases of the curing reaction behaviour of A-B systems with A and B as isocyanate and polyol or amine and epoxide: With autokatalytic activation of A or of B; with catalytic activation of A Bohn, Manfred	Conference Paper
2019	Kombination von Sheet und Bulk Molding Compound in Jutefaserverbunden Lautenschläger, Miriam Isabell; Elsner, P.; Büter, A.; Weidenmann, K.A.	Dissertation
2019	Lifetime of airbag inflators: Perspectives for a better understanding and prediction of aging mechanisms Yurrita, Pedro; Kuchenreuther-Hummel, Veronica; Pietsch, Erik; Bermejo, Jorge	Conference Paper full text
2019	Lignin Oxidation for the Exploitation of High Value Oligomer Building Blocks: Presentation held at 3rd International Biotechnology Congress, IBC 2019, From Disruptive Innovation to Industrial Applications, Singapore, October 25-27, 2019 Jänisch, Thorsten	Presentation full text
2019	A machine learning assisted approach for textile formability assessment and design improvement of composite components Zimmerling, Clemens; Dörr, Dominik; Henning, Frank; Kärger, Luise	Journal Article
2019	Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten Gatti, F.; Amann, T.; Kailer, A.; Abicht, Johannes; Rabenecker, P.; Baltes, N.; Rühe, J.	Journal Article
2019	Maßnahmen zur Reduktion der Ausschussquote bei der Produktion von Lithium-Ionen Zellen Hilger, Celine; Franke, D.; Meilinger, S.; Hagen, M.	Bachelor Thesis
2019	Mechanical properties of foamed long glass fiber reinforced polyphenylene sulfide integral sandwich structures manufactured by direct thermoplastic foam injection molding Lohr, C.; Beck, B.; Henning, Frank; Weidenmann, K.A.; Elsner, Peter	Journal Article
2019	Methodenentwicklung zur Charakterisierung der Aushärtung duromerer Komposite mittels dielektrischer Analyse Ricker, Daniel; Ilinzeer, Sergej (Projektleiter); Henning, Frank (Betreuer)	Master Thesis
2019	Modelling of Al/MnO2 and Ti/MnO2 Thermite Mixtures Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker	Journal Article
2019	Modelling of the heat transfer coefficient in a nozzle bomb for gun propellant erosivity studies Bermejo, Jorge; Yurrita, Pedro	Conference Paper full text
2019	Modified and normal Arrhenius equation to characterize glass-rubber transition shifts in filled HTPB-IPDI formulations Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter	Conference Paper full text
2019	Modular Thinking. Development of a Production Plant for Hybrid Fiber Composite Components Kilian, Sascha; Joppich, Tobias	Journal Article full text
2019	Der modulare Gedanke. Entwicklung einer Anlage für die Produktion hybrider Faserverbund-Bauteile Joppich, Tobias; Kilian, Sascha	Journal Article full text
2019	Molecularly Imprinted Sol-Gel for TNT Detection with Optical Micro-Ring Resonator Sensor Chips Eisner, Ludmila; Wilhelm, Isabel; Flachenecker, Günter; Hürttlen, Jürgen; Schade, Wolfgang	Journal Article full text
2019	New Approach for the Efficient Attainment of Flame Retardancy Using Multi Component Injection Molding Schneider, Dorothea; Hübner, Christof; Bourbigot, Serge	Conference Paper full text
2019	Numerical modeling of a hybrid forming process for three-dimensionally curved fiber-metal laminates Werner, Henrik O.; Dörr, Dominik; Henning, Frank; Kärger, Luise	Conference Paper
2019	On the effect of electric field application during the curing process on the electrical conductivity of single-walled carbon nanotubes–epoxy composites Morais, Manuel V.C.; Oliva-Aviles, A.I.; Matos, M.A.S.; Tagarielli, V.L.; Pinho, S.T.; Hübner, Christof; Henning, Frank	Journal Article full text
2019	On the relevance of thermomechanics and crystallization kinetics for FE thermoforming simulation of semi-crystalline thermoplastic tapes Dörr, Dominik; Kugele, Daniel; Joppich, Tobias; Henning, Frank; Kärger, Luise	Conference Paper
2019	Optimierung eines säure-katalysierten Ethanol-Wasser Organosolv-Prozesses für die Biomassen Pappel mit Rinde und Miscanthus G. in Hinblick auf Ligninfraktionierung und -funktionalisierung Rohde, Viktoria; Dahmen, N.; Syldatk, C.	Dissertation
2019	Oxidation kinetic studies of tic-particles using x-ray diffraction Kuchenreuther-Hummel, Veronica	Conference Paper full text
2019	Particle properties and crystalline structure of ADN-Prills Heintz, Thomas; Herrmann, Michael	Conference Paper full text
2019	Pressure and Temperature Dependency of ADN-based Solid Rocket Propellants Imiolek, Andreas; Becker, Wolfgang; Weiser, Volker; Bieroth, Diana	Conference Paper full text
2019	Process Development for Chemical Recycling of Bio-based Polymers Majgaonkar, Pranav	Master Thesis
2019	Processing of plastic bonded explosives with new mixing technologies Gerber, Peter; Happ, Andreas	Conference Paper
2019	Progress in Additive Manufacturing of Energetic Materials: Creating the Reactive Microstructures with High Potential of Applications Muravyev, N.V.; Monogarov, K.A.; Schaller, Uwe; Fomenkov, I.V.; Pivkina, A.N.	Journal Article
2019	Properties and Structure of ADN-Prills Heintz, Thomas; Herrmann, Michael	Journal Article
2019	Prozess-Struktur-Eigenschafts-Beziehungen hybrider Polymer-Metall-Verbundstrukturen aus dem Spritzgießprozess Schwarz, Angela	Master Thesis full text
2019	Prozessierung hochgefüllter Kunststoffe mittels Werkstoffextrusion: Poster präsentiert bei Chemie hilf 3D-Druck, 18.-19. Februar 2019, DECHEMA, Frankfurt am Main Mitró, Daniel; Schaller, Uwe	Poster full text
2019	Reaktoren für spezielle technisch-chemische Prozesse: Mikrostrukturreaktoren Boskovic, Dusan	Book Article
2019	Rechnerische Bewertung der Bauteillebensdauer von Aluminiumgusskomponenten unter kombinierter thermomechanischer und hochfrequenter Belastung: Abschlussbericht; Laufzeit: 01.11.2015 - 31.12.2018 Fischer, C.; Schweizer, C.; Mittag, S.; Seifert, T.; Elsner, P.	Report
2019	Recocido subcrítico de aceros de alta resistencia y estudio de su comportamiento frente al desgaste provocado por la combustión de explosivos Bermejo Sanz, Jorge	Dissertation
2019	Recycled Poly(Ethylene Terephthalate)/Clay Nanocomposites: Rheology, Thermal and Mechanical Properties Chowreddy, R.R.; Nord-Varhaug, K.; Rapp, F.	Journal Article
2019	Segmented Printed Circuit Board Electrode for Locally-Resolved Current Density Measurements in All-Vanadium Redox Flow Batteries Gerber, Tobias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens	Journal Article full text
2019	Separation of volatile fatty acids from biogas plant hydrolysates Jänisch, Thorsten; Reinhardt, Sebastian; Pohsner, Ute; Böringer, Sarah; Bolduan, R.; Steinbrenner, J.; Oechsner, H.	Journal Article
2019	Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR: Presentation held at BIT's 3rd International Biotechnology Congress, IBC 2019, October 25-27, 2019, Singapore; From Disruptive Innovation to Industrial Applications Jänisch, Thorsten; International Biotechnology Congress (IBC) <3, 2019, Singapore>	Presentation full text
2019	Simulation of Damage Characteristics Fischer, C.; Mittag, S.; Kuhlen, Karl Gerhard; Schweizer, C; Seifert, T.; Dittrich, Robert; Kollmeier, Hans-Peter	Report
2019	Simulieren, aber richtig! Das Problem der reversiblen Wasseraufnahme bei Waterborne-Beschichtungen Becker, Wolfgang; Cäsar, Joachim; Knapp, Sebastian; Koleczko, Andreas; Schmid, Helmut	Conference Paper
2019	Specific bending stiffness of in-mould-assembled hybrid sandwich structures with carbon fibre reinforced polymer face sheets and aluminium foam cores manufactured by a polyurethane-spraying process Rupp, Peter; Elsner, Peter; Weidenmann, K.A.	Journal Article
2019	Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren: StarTex. Schlussbericht zum Vorhaben Manvi, Pavan Kumar; Möbitz, Christian; Buczko, Aleksandra; Schawaller, Dirk; Müller, Christoph	Report full text
2019	Structure and thermal behavior of TKX-50 Herrmann, Michael; Förter-Barth, Ulrich	Conference Paper full text
2019	Sulfides and Disulfides of s-Triazine and s-Heptazine: Flame Retardancy: Poster presented at European Meeting on Fire Retardant Polymeric Materials, FRPM 2019, 26-28 June 2019, Turku, Finland Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin	Poster full text
2019	Supercritical water as reaction media: Presentation held at BIT's 5th Annual World Congress of Smart Materials 2019, March 6-8, 2019, Rome, Italy Jänisch, Thorsten	Presentation full text
2019	Supermet: Recovery of precious metals from spent catalysts by supercritical CO2 Extraction assisted by polymers: Presentation held at 14th Carbon Dioxide Utilisation Summit 2019, 9th & 10th October 2019, Düsseldorf, Germany Jänisch, Thorsten; Ruiu, Andrea; Seaudeau-Pirouley, Karin; Senila, Marin; Bauer-Siebenlist, Bernhard; Lacroix-Desmazes, Patrick	Presentation
2019	Synthesis of Thiocyameluric Acid C6N7S3H3, its Reaction to Alkali Metal Thiocyamelurates and Organic Tris(dithio)cyamelurates Posern, Christian; Höhne, Carl-Christoph; Böhme, Uwe; Vogt, Claudia; Kroke, Edwin	Journal Article full text
2019	Thermal Characterization of Naturally Aged Propellants Heil, Moritz; Hickmann, Jürgen; Müller, Christian	Journal Article full text
2019	Thermites - Versatile Materials Koch, Ernst‐Christian; Knapp, Sebastian	Journal Article
2019	Three-Dimensional fiber skeleton: Local Continuous Fiber-Reinforcement trough 3D Skeleton Winding Technology Beck, Björn; Haas, Jonathan; Tawfik, Hussam	Journal Article
2019	Trace level detection of explosives by surface enhanced raman spectroscopy (SERS) for defence applications - best practice Schweikert, Wenka; Schnürer, Frank; Mendl, Alexander; Müller, S.	Conference Paper full text
2019	UD-Tape basierte Bauteile in kurzer Zykluszeit. Strahlungsinduzierte Vakuumkonsolidierung beschleunigt UD-Tape-Verarbeitung: Beitrag auf der Internetseite Plastverarbeiter (https://www.plastverarbeiter.de), 23. April 2019 Link, Tobias	Journal Article full text
2019	Untersuchungen zum Leistungs- und Korrosionsverhalten eines HT-PEM-Brennstoffzellen-Stacks Zick, Lars Moritz	Master Thesis
2019	UV/VIS Spektroskopie zur kontinuierlichen Bestimmung des Ladezustandes eines Vanadium Redox Flow Batterie Winter, Christoph	Master Thesis
2019	Vanadium electrolyte for all-vanadium redox-flow batteries: The effect of the counter ion Roznyatovskaya, Nataliya; Noack, Jens; Mild, Heiko; Fühl, Matthias; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens; Skyllas-Kazacos, Maria	Journal Article full text
2019	Vanadium Oxygen Fuel Cell Utilising High Concentration Electrolyte Risbud, Mandar; Menictas, Chris; Skyllas-Kazacos, Maria; Noack, Jens	Journal Article full text
2019	Verbrückte Phosphorverbindungen als Flammschutzmittel in Epoxidharzen Weinert, Michael; Döring, Manfred (Gutachter); Mastalerz, M. (Gutachter)	Dissertation full text
2019	Verfahrensoptimierung der Herstellung von Nanocellulose-Trägermedium-Gemische zur Einarbeitung in Biopolymere Heymann, Valeska; Wiskamp, Volker; Gräbe, Gudrun	Bachelor Thesis
2019	Virtual process chain of sheet molding compound: Development, validation and perspectives Görthofer, J.; Meyer, N.; Pallicity, T.D.; Schöttl, L.; Trauth, A.; Schemmann, M.; Hohberg, M.; Pinter, P.; Elsner, Peter; Henning, Frank; Hrymak, A.; Seelig, T.; Weidenmann, K.; Kärger, L.; Böhlke, T.	Journal Article
2019	Water Management in a High Current Density PEM Electrolysis Cell Reum, Tobias	Master Thesis full text
2019	The way towards a CL-20/HMX Cocrystal scale-up Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas; Gerber, Peter; Klapötke, Thomas M.	Conference Paper full text
2019	Weiterentwicklung einer Methodik zur rheologischen Untersuchung von schnellhärtenden Epoxidharzen Dietrich, Philipp; Henning, Fraunk (Betreuer); Hüttl, Julian (Projektleiter)	Bachelor Thesis
2019	Werkstoffcharakterisierung zur Prozessentwicklung der Materialvorbehandlung für die Eignung im T-RTM Herstellverfahren Herzog, Janek; Wendel, Rainer (Betreuer); Pöhler, Frank (Betreuer)	Master Thesis

This publication list has been generated from the publication database Fraunhofer-Publica.

Publications from 2018

Here you can find all publications made by Fraunhofer ICT in 2018.

Year	Title/Author	Document Type
2018	A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding Poppe, C.; Dörr, D.; Henning, F.; Kärger, L.	Conference Paper
2018	Accelerated ageing and hydrolytic stabilization of poly(lactic acid) (PLA) under humidity and temperature conditioning Porfyris, A.; Vasilakos, S.; Zotiadis, C.; Papaspyrides, C.; Moser, K.; Schueren, L. van der; Buyle, G.; Pavlidou, S.; Vouyiouka, S.	Journal Article
2018	Accurate description of the ageing of energetic materials Heil, Moritz	Conference Paper
2018	Airbag 2018, 14th International Symposium and Accompanying Exhibition on Sophisticated Car Occupant Safety Systems: Mannheim, Germany, 2018, November 26-28 Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Conference Proceedings
2018	Almost inseparable. Strong adhesion in metal-polymer compounds due to nanoporous adhesive layer Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf	Journal Article full text
2018	Analysis of gases emitted in safety events Abert, M.	Book Article
2018	Ap-free composite propellants as reclament for AP/HTPB/AL Tagliabue, Claudio; Fischer, Sebastian; Gettwert, Volker; Weiser, Volker	Conference Paper full text
2018	Application and evaluation of meta-model assisted optimisation strategies for gripper assisted fabric draping in composite manufacturing Zimmerling, Clemens; Pfrommer, Julius; Liu, Jinzhao; Beyerer, Jürgen; Henning, Frank; Kärger, Luise	Conference Paper full text
2018	Beinahe unzertrennlich. Hohe Festigkeit durch nanoporöse Haftschicht für Metall-Kunststoff-Verbunde Emmerich, Rudolf; Laux, Marcel; Dreher, Ralf	Journal Article full text
2018	Beobachtung des Schädigungsverhaltens von Zylinderkopfproben bei TMF-Belastung Cömertpay, Hatem; Koch, Thomas (Betreuer); Kuhlen, Gerhard (Betreuer)	Master Thesis
2018	Binder crystal adhesion measured in macro HMX/HTPB-composites Kronis-Rudigier, Gunnar; Herrmann, Michael	Conference Paper full text
2018	Burning behaviour of ADN solid propellants in comparison to other oxidizers Imiolek, Andreas; Weiser, Volker; Locatelli, Francesco; Tagliabue, Claudio; Gettwert, Volker; Bieroth, Diana	Conference Paper full text
2018	Burning behaviour of energetic ionic liquids investigated with-4-amino-1-methyl-1,2,4-triazolumnitrat Weiser, Volker; Schaller, Uwe	Conference Paper full text
2018	Camphor coated powders investigated by imaging spectroscopy Pontius, Heike; Dörich, Manuela; Heil, Moritz	Conference Paper full text
2018	Characterisation of particle mixtures by nano computer tomography Knapp, Sebastian; Koleczko, Andreas; Kröber, Hartmut	Conference Paper full text
2018	Characterization of gun propellants containing bateg Böhnlein-Mauß, Jutta; Mitró, Daniel; Keicher, Thomas	Conference Paper full text
2018	Characterization of polyester-based polyurethane elastomers plasticized with energetic ionic liquids Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.; Schaller, Uwe	Conference Paper
2018	Charakterisierung der Einflussparameter für das Verarbeiten von PA6 Hybridrovings im Wickelverfahren für endlosglasfaserverstärkte Spritzgussbauteile Becker, Jerome	Master Thesis
2018	Chemical Recycling of post-consumer Mattress Materials Yogish, Savina Padumane	Master Thesis full text
2018	Comminution of energetic materials in viscous binder components with high solid loadings Dresel, Alexander; Gerber, Peter; Roßmann, Christian; Heintz, Thomas	Conference Paper full text
2018	The connection between WLF equation and Arrhenius equation Bohn, Manfred A.	Conference Paper
2018	Copolymers based on GAP and 1,2‐Epoxyhexane as Promising Prepolymers for Energetic Binder Systems Hafner, S.; Keicher, T.; Klapötke, T.M.	Journal Article
2018	Corrossion behaviour of aluminide diffusion coatings on ferritic steel in molten Solar Salt Weick, Sarah	Master Thesis full text
2018	D 6.8 PEDR Plan for the Exploitation and Dissemination of Results. Final Report Lagioia, Rocco; Müller, Torsten; Forte, Federica; Araujo, Blanca; Yurramendi, Lourdes; Sgarioto, Rocca; García, Jose Manuel	Report
2018	D 7.2 Second Progress Report Part A Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco	Report
2018	D 7.3 Third Progress Report: D 7.3 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Los Cost Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Müller, Torsten; Val, Diego; García, Jose Manuel; Lagioia, Rocco	Report
2018	Decolorization of plastics by extraction of pigments with supercritical CO2: Poster presented at 6th Conference on Carbon Dioxide as Feedstock for Fuels, Chemistry and Polymers. 15th Mar - 16th Mar 2018, Cologne, Germany Jänisch, Thorsten; Unser, Steffen	Poster full text
2018	Demonstration of a Nonlinear Model Predictive Control of a Thermal Management System for Electric Vehicles in Real-Time Fischer, T.; Kraus, T.; Kirches, C.; Gauterin, F.	Conference Paper
2018	DEMS and online mass spectrometry studies of the carbon support corrosion under various polymer electrolyte membrane fuel cell operating conditions Cremers, Carsten; Jurzinsky, Tilman; Meier, Jan; Schade, A.; Branghofer, Marco; Pinkwart, Karsten; Tübke, Jens	Journal Article full text
2018	Development of electrolytes for lithium-sulfur batteries with focus on electrochemical and electrolyte decomposition analyses Nave, Eran	Master Thesis full text
2018	Development of full carbon wheels for sport cars with high-volume technology Rondina, Francesco; Taddia, Sara; Mazzocchetti, Laura; Donati, Lorenzo; Minak, Giangiacomo; Rosenberg, Philipp; Bedeschi, Andrea; Dolcini, Enrico	Journal Article full text
2018	DMA of polyester-based polyurethane elastomers for composite rocket propellants containing different energetic plasticizers Lemos, M.F.; Bohn, M.A.	Journal Article
2018	Effect of HMX distribution and plasticizer content variations on the DMA loss factor of HTPB-IPDI binder Bohn, Manfred A.; Gerber, Peter; Heintz, Thomas; Herrmann, Michael	Conference Paper full text
2018	The Effect of Nonlinearity on Determined Parameters of Gun Propellant Burn Rate Models: The Ballistic Compensation Effect Wurster, S.	Journal Article
2018	Einleuchtende Idee. Fraunhofer ICT verarbeitet leitfähiges Material in der additiven Fertigung Hübner, Christof	Journal Article full text
2018	Electrolyte decomposition and electrode thickness changes in Li-S cells with lithium metal anodes, prelithiated silicon anodes and hard carbon anodes Hancock, K.; Becherer, J.; Hagen, M.; Joos, M.; Abert, M.; Müller, D.; Franz, P.; Straach, S.; Tübke, J.	Journal Article
2018	Entwicklung einer neuartigen Verarbeitungstechnologie zur universellen Umformung von endlosfaserverstärkten thermoplastischen Hohlprofilen Liyang, Hong	Master Thesis
2018	Entwicklung eines additiv gefertigten Kurbelgehäuses für einen Einzylinder Rennmotor Hirzler, Ingo	Master Thesis
2018	Entwicklung eines Reglers für die Austrittstemperatur von Wirbelrohren Brantin, Alexej	Bachelor Thesis full text
2018	Entwicklung und Evaluation von alkoholtoleranten Pt-basierten Kathodenkatalysatoren für Direktalkohol-Brennstoffzellen-Anwendungen: Schlussbericht zu Nr. 8.2 BMBF - NKBF 98 für das Vorhaben der Wissenschaftlich-Technischen Zusammenarbeit (WTZ) mit Argentinien Cremers, Carsten	Report
2018	Evaluation of an Integral Injection Molded Housing for High Power Density Synchronous Machines with Concentrated Single-Tooth Winding Langheck, Andreas; Reuter, Steffen; Saburow, Oleg; Märtens, Robert; Wittemann, Florian; Berg, Lars Frederik; Doppelbauer, Martin	Conference Paper full text
2018	Experimental and numerical investigation of the shear behaviour of infiltrated woven fabrics Poppe, C.; Dörr, D.; Henning, F.; Kärger, L.	Journal Article
2018	Experimental calibration of manganin pressure gauges Wurster, Sebastian; Schrabback, M.; Leibold, Marvin	Conference Paper full text
2018	Fertigung ionisch leitender Membranen für den Einsatz in Festkörperbatterien Theil, Patrik André; Doppelbauer, Martin; Tübke, Jens (Betreuer); Ahlbrecht, Katharina (Betreuer)	Master Thesis
2018	Foam injection molding of glass fiber reinforced polypropylene composites with laminate skins Kasemphaibulsuk, Pibulchai; Holzner, Marcel; Kuboki, Takashi; Hrymak, Andrew	Journal Article
2018	Following isocyanate-polyol curing by volume shrinkage induced pressure decrease - considering reaction volume, activation volume, compressibility and diffusion control Bohn, Manfred A.	Conference Paper
2018	Formation of ADN-prills in microfluidic droplet generators Radulescu, Ligia; Eberhardt, Angelika; Boskovic, D.	Conference Paper full text
2018	Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2017/2018 Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Annual Report full text
2018	Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine: Partner Periodic Report #2; 1 November 2016 to 30 April 2018. Hercules-2 Project Kuhle, Karl Gerhard	Report
2018	Gasanalytik, Schichtdickenmessungen und Stabilitätsuntersuchungen an kostengünstigen Elektroden für stationäre Energiespeicher Petit, Jan; Tübke, Jens (Betreuer); Pfeifer, Peter (Gutachter); Hagen, Marcus (Betreuer)	Master Thesis full text
2018	High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants Audigié, P.; Encinas-Sánchez, V.; Juez-Lorenzo, M.; Rodríguez, S.; Gutiérrez, M.; Pérez, F.J.; Agüero, A.	Journal Article
2018	Hybrid materials - Joining of polymers and metals Spancken, Dominik; Laveuve, Dominik M.; Beck, J.; Stötzner, Norbert; Straeten, Kira van der; Büter, Andreas; Henning, Frank	Conference Paper full text
2018	Hybrid thermoplastic composites for automotive applications - Development and manufacture of a lightweight rear floor structure in multi-material design Link, Tobias; Baumgärtner, Sascha; Dörr, Dominik; Hohberg, Martin; Henning, Frank	Conference Paper full text
2018	Illuminating Idea. Fraunhofer ICT processes conductive material in additive manufacturing Hübner, Christof	Journal Article
2018	Impact of carbon support functionalization on the electrochemical stability of Pt fuel cell catalysts Schmies, H.; Hornberger, E.; Anke, B.; Jurzinsky, T.; Nong, H.N.; Dionigi, F.; Kühl, S.; Drnec, J.; Lerch, M.; Cremers, C.; Strasser, P.	Journal Article
2018	Inbetriebnahme eines Prüfstands zur Bestimmung des Einflusses von kombinierter TMF/HCF-Belastung auf die Lebensdauer von Aluminiumkolben Koleczko, Rubens	Bachelor Thesis full text
2018	Influence of ADN/Nitramine Mixtures on the Burning Behaviour of Composite Propellants with Inert and Energetic Binders Locatelli, Francesco	Master Thesis full text
2018	The influence of electrochemical treatment on electrode reactions for vanadium redox-flow batteries Noack, J.; Roznyatovskaya, N.; Kunzendorf, J.; Skyllas-Kazacos, M.; Menictas, C.; Tübke, J.	Journal Article
2018	Influence of HFO refrigerants on the viscoelastic behavior of elastomers Eyerer, S.; Eyerer, P.; Wieland, C.; Spliethoff, H.	Conference Paper
2018	Integration of electronic components in the thermoplastic processing chain: Possibilities through additive manufacturing using conductive materials Morais, M.V.C.; Reidel, R.; Weiss, P.; Baumann, S.; Hübner, C.; Henning, F.	Conference Paper
2018	Internal plasticized glycidyl azide polyethers for solid propellant binders Hafner, Sven; Keicher, Thomas	Conference Paper full text
2018	Intrinsic flame resistance of polyurethane flexible foams: Unexpectedly low flammability without any flame retardant Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin	Journal Article full text
2018	Inverse Gaschromatographie Untersuchungen für Alkane, Alkohole, Aromaten und Nitroverbindungen zur Charakterisierung eines selektiven Multiadsorbers Schuster, Martina; Flick, Klemens (Betreuer); Wittek, Michael (Betreuer)	Master Thesis
2018	Klär- und Abwasseraufbereitung: Membrantechnologien und Hydrothermale Carbonisierung (HTC) inkl. Prozesswasseraufbereitung: Vortrag gehalten bei der Bundeswehrtagung 2018, April, Bonn; Unterbringung im Einsatz Jänisch, Thorsten	Presentation full text
2018	Life cycle assessment: A tool to eco-design structural composite parts Reichert, T.; Salles, A.	Conference Paper
2018	Life cycle gaps: Interpreting LCA results with a circular economy mindset Dieterle, Michael; Schäfer, Philipp; Viere, Tobias	Journal Article full text
2018	Locally continuous-fiber reinforced sheet molding compound Bücheler, David; Henning, F.; Osswald, T.A.; Weidenmann, K.A.; Möslang, A.	Dissertation full text
2018	Long-term behaviour of Nb and Cr nitrides nanostructured coatings under steam at 650 °C: Mechanistic considerations Agüero, Alina; Juez-Lorenzo, Maria; Hovsepian, Papken; Ehiasarian, Arutiun Papken; Purandare, Yashodhan; Muelas, Raúl	Journal Article
2018	Makroskopische Reibwertsteuerung durch elektrochemische Potentiale mit ionischen Flüssigkeiten Gatti, F.; Amann, T.; Kailer, A.; Rabenecker, P.; Baltes, N.; Rühe, J.	Conference Paper
2018	Mass flow determination of airbag inflators Yurrita, Pedro; Klahn, Thorsten; Neutz, Jochen; Edelmann, Nico	Conference Paper
2018	Material- und Verfahrensentwicklung zur industriellen Umsetzung großflächiger endlosfaserverstärkter Bauteile aus aPA6 - am Beispiel von 2D-Flechtbauteilen Pfister, Sandra Kathrin	Dissertation
2018	MD simulation of HMX rupture under tensile stress Nardai, Michael M.; Bohn, Manfred A.	Conference Paper
2018	Messtechnische Erfassung und Auswertung eines thermischen Solarkollektorfeldes Glastetter, Anton	Bachelor Thesis
2018	A meta-model based approach for rapid formability estimation of continuous fibre reinforced components Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L.	Conference Paper
2018	Methanol oxidation reaction on core-shell structured Ruthenium-Palladium nanoparticles: Relationship between structure and electrochemical behavior Kübler, M.; Jurzinsky, T.; Ziegenbalg, D.; Cremers, C.	Journal Article
2018	Microstructure and Thermal Behavior of ADN-Prills investigated by means of X-ray Diffraction. Pt.II Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Bernd; Heintz, Thomas	Conference Paper
2018	Modellierung und Simulation eines Pufferbehälters mit Luftumwälzung zur Durchmischung einer Sprengstoff-Wasser Suspension mit OpenFOAM Schmähl, Florian	Master Thesis
2018	Modellierung, Simulation und Charakterisierung des Abbrandes extrudierbarer Festtreibstoffe mit komplexer Querschnittgeometrie Wurster, Sebastian; Elsner, Peter; Teipel, Ulrich	Dissertation
2018	Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes Dörr, Dominik; Faisst, Markus; Joppich, Tobias; Poppe, Christian; Henning, Frank; Kärger, Luise	Conference Paper
2018	Moisture sorption of ɛ-caprolactam and its influence on the anionic polymerization in the thermoplastic RTM-process - An overview Wilhelm, Michael; Wendel, Rainer	Conference Paper full text
2018	Molecular dynamics simulation of tensile tests at a curved binder-particle interface Nardai, Michael M.; Bohn, Manfred A.	Conference Paper full text
2018	Molecularly imprinted polymers for detection of explosives In gas phase approach for the detection of TNT in cargo containers Heil, Moritz	Conference Paper full text
2018	Multi-objective patch optimization with integrated kinematic draping simulation for continuous-discontinuous fiber-reinforced composite structures Fengler, Benedikt; Kärger, Luise; Henning, Frank; Hrymak, Andrew	Journal Article full text
2018	Multifunktionelle medizinische Sonde Eckl, Wilhelm; Schmid, Helmut; Scholz, Peter	Patent full text
2018	Nanomaterialien für elektrische Energiespeicher Calgar, Burak; Fischer, Peter; Hagen, Markus; Tübke, Jens; Althues, Holger; Dörfler, Susanne; Guntow, Uwe; Schulz, Jochen; Endler, Ingolf; Fritsch, Marco; Meißner, Frank; Wolter, Mareike	Book Article
2018	A new algorithm to determine geometric properties of propellant grains from computer tomographic images Wurster, Sebastian; Sprengel, David	Conference Paper full text
2018	New battery technologies for electric vehicles - What will we see on the road? Tübke, J.	Conference Paper
2018	Nir-flare compositions basing on hot water band emission Roth, Evelin; Weiser, Volker; Lity, Andre; Raab, Angelika; Kelzenberg, Stefan	Conference Paper full text
2018	Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics Dörr, D.; Henning, F.; Kärger, L.	Journal Article
2018	A novel differential electrochemical mass spectrometry method to determine the product distribution from parasitic Methanol oxidation reaction on oxygen reduction reaction catalysts Jurzinsky, T.; Kurzhals, P.; Cremers, C.	Journal Article
2018	Novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide Weinert, Michael; Fuhr, Olaf; Döring, Manfred	Journal Article
2018	Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP Muth, M.; Schwennen, J.; Bernath, A.; Seuffert, J.; Weidenmann, K.A.; Fleischer, J.; Henning, F.	Journal Article
2018	Numerische Modellierung einer selbsterhaltenden Hochtemperatursynthese von nano-strukturierten Bor-Partikeln Heger, Patrick; Pietsch, Erik (Betreuer); Teipel, Ulrich (Erstkorrektor); Ranong, Chakkrit (Zweitkorrektor)	Master Thesis full text
2018	Ölverbrauchsmessung an einem Abgasturbolader mit einem Flammenionisationsdetektor am Heißgasprüfstand Dietrich, Simon	Bachelor Thesis full text
2018	On the scale-up of metal-organic frameworks using microreaction technology: The cases of ZIF-8 and UiO-66 Polyzoidis, Angelos	Dissertation full text
2018	Optical properties of filled polymeric composite materials from near infrared spectroscopy Becker, Wolfgang; Sachsenheimer, K.; Roth, Evelin; Knapp, Sebastian; Weiser, Volker	Conference Paper full text
2018	Optimierte Emulsions- und Partikelerzeugung in mikrofluidischen Strukturen Winter, Yannik	Master Thesis full text
2018	Optimization of the biogas process by delignification of the feed and separation of volatile fatty acids during the process: Presentation held at BIT's 7th Annual World Congress of Advanced Materials 2018, Innovation, Integration, Transformation and Sustainability, September 13-15, 2018, Xiamen, China Jänisch, Thorsten	Presentation full text
2018	Oxidation of manganese and decomposition of MnO2 Kelzenberg, Stefan; Eisenreich, Norbert; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike	Conference Paper full text
2018	Partikeltechnologie Teipel, U.; Türk, M.	Journal Article
2018	Polymerbasierte Nanokomposite Diemert, Jan; Hübner, Christof; Hartwig, Andreas; Laschewsky, Andre	Book Article
2018	Preconcentration of Nitroalkanes with Archetype Metal–Organic Frameworks (MOFs) as Concept for a Sensitive Sensing of Explosives in the Gas Phase Rieger, M.; Wittek, M.; Scherer, P.; Löbbecke, S.; Müller-Buschbaum, K.	Journal Article
2018	Principles of ageing of double base propellants and its assessment by several methods following propellant properties Bohn, Manfred A.	Conference Paper full text
2018	Printed explosives standards for the evaluation of stand-off optical systems Schnürer, F.; Ulrich, C.; Müller, S.; Schweikert, W.	Conference Paper
2018	Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology Lohr, C.; Beck, B.; Henning, F.; Weidenmann, K.A.; Elsner, P.	Journal Article
2018	Product design of ADN-PRILLS for applications in solid propellants Heintz, Thomas; Leisinger, Karlfred; Reinhardt, Werner; Heil, Moritz; Herrmann, Michael	Conference Paper full text
2018	Prozessentwicklung für den Einsatz neuer Prototyping Technologien in der Entwicklung Kübler, Maximilian Stephan; Heilmaier, Martin (Betreuer); Hanemann, Thomas (Betreuer); Reuter, Steffen (Betreuer)	Bachelor Thesis
2018	Prozesstechnik zur Altholzaufbereitung Eisenlauer, M.; Graf, H.; Teipel, U.	Journal Article
2018	Rare earths and the balance problem: How to deal with changing markets? Binnemans, Koen; Jones, Peter Tom; Müller, Torsten; Yurramendi, Lourdes	Journal Article full text
2018	Reaction between azide molecule with hydroxyl terminated polybutadiene Ferrapontoff Lemos, Mauricio; Dörich, Manuela; Keicher, Thomas; Bohn, Manfred A.; Mendes, C.	Conference Paper full text
2018	Recycled polyethylene terephthalate/carbon nanotube composites with improved processability and performance Chowreddy, Ravindra Reddy; Nord-Varhaug, Katrin; Rapp, Florian	Journal Article
2018	Redox-Flow-Zelle und Verfahren zu deren Herstellung Noack, Jens; Pinkwart, Karsten; Rumpel, Georg; Tübke, Jens	Patent full text
2018	Reducing load in air transportation: Fiber-reinforced thermoplastic modules can be used to reinforce airplane cargo compartments Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo	Journal Article full text
2018	Reproducible generation of explosive traces for detection system testing Wittek, M.; Röseling, D.; Schnürer, F.; Heintz, T.; Dresel, A.; Wegener, T.; Schmäh, M.	Conference Paper
2018	A review of electrolyte additives and impurities in vanadium redox flow batteries Cao, L.; Skyllas-Kazacos, M.; Menictas, C.; Noack, J.	Journal Article
2018	Rheological studies on gas-laden and long glass fiber reinforced polypropylene through an inline high pressure capillary rheometer in the injection molding process Lohr, C.; Dieterle, S.; Menrath, A.; Weidenmann, K.A.; Elsner, P.	Journal Article
2018	Risikoanalyse und Entwicklung eines Sicherheitskonzeptes für eine Hochdruckversuchsanlage zur Abbrandcharakterisierung von Raketenfesttreibstoffen Wachter, Laura	Master Thesis full text
2018	RoBEMM - Robotische Unterwasser-Bergungs und Entsorgungsverfahren inklusive Technik zur Delaboration von Munition im Meer, insbesondere Im Küsten- und Flachwasserbereich Abbondanzieri, M.; Klein, T.; Frey, T.; Müller, P.	Conference Paper
2018	Sensitivity reduction of the CL-20/HMX cocrystal via advanced crystallization process Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas	Conference Paper
2018	Separation of volatile fatty acids (VFA) formed during the biogas process - OPTIGÄR: Presentation held at 3rd Renewable Energy Sources-Research and Business Conference, June 18-20, 2018, Brussels, Belgium Jänisch, Thorsten	Presentation full text
2018	Simulation of reinforced reactive injection molding with the finite volume method Wittemann, Florian; Märtens, Robert; Bernarth, Alexander; Hohberg, Martin; Kärger, Luise; Henning, Frank	Journal Article full text
2018	Small object low-velocity impact damage on hybrid sandwich structures with CFRP face sheets and aluminum foam cores Rupp, P.; Elsner, P.; Weidenmann, K.A.	Journal Article
2018	Steam oxidation of aluminide coatings under high pressure and for long exposures Boulesteix, C.; Kolarik, V.; Pedraza, F.	Journal Article
2018	Studie zur oxidativen Konversion von Lignin zu polyfunktionellen Oligomeren und konstruktive Technikfolgenabschätzung eines entsprechenden Prozessmoduls Reinhardt, Sebastian	Master Thesis
2018	Sulfides and Disulfides of S-Triazine and S-Heptazine: Flame Retardancy: Poster präsentiert auf der 19. Vortragstagung für Anorganische Chemie der Fachgruppen Wöhler Vereinigung und Festkörperchemie und Materialforschung, 24.-27. September 2018, Regensburg Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin	Poster full text
2018	Sulfides and disulfides of s-Triazine: Potential thermal thiyl radical generators Höhne, Carl-Christoph; Posern, Christian; Böhme, Uwe; Kroke, Edwin	Journal Article
2018	Synthesis of metal-organic frameworks for energetic applications Piscopo, Calogero Giancarlo; Polyzoidis, Angelos; Schwarzer, M.; Boskovic, D.; Löbbecke, Stefan	Conference Paper full text
2018	Tensile test of HMX/HTPB macro-composites Herrmann, Michael; Kronis-Rudigier, Gunnar	Conference Paper
2018	Testtailoring Cäsar, Joachim	Conference Paper
2018	Theoretical analysis and experimental investigation of material compatibility between refrigerants and polymers Eyerer, S.; Eyerer, P.; Eicheldinger, M.; Tübke, B.; Wieland, C.; Spliethoff, H.	Journal Article
2018	Thermal characterization of naturally aged gun and rocket propellants Heil, Moritz; Hickmann, J.	Conference Paper full text
2018	Titania supported on silica as an efficient catalyst for deep oxidative desulfurization of a model fuel with exceptionally diluted H2O2 Piscopo, C.G.; Tochtermann, J.; Schwarzer, M.; Boskovic, D.; Maggi, R.; Maestri, G.; Loebbecke, S.	Journal Article
2018	Untersuchung der Eignung von thermoplastischem Cellulosepropionat zur Aufschäumung im kontinuierlichen Schaumextrusionsprozess Rapp, Florian; Elsner, Peter; Altstädt, Volker	Dissertation
2018	Untersuchung der Möglichkeiten zur Reibungsreduzierung verbrennungsmotorischer Steuertriebe durch pneumatische Ventilfedern Hartweg, Matthias; Gumbsch, P.; Koch, T.	Dissertation full text
2018	Untersuchung und Optimierung einer Eisen-basierten Redox-Flow-Batterie Wernado, Mike; Silva, Pedro (Betreuer); Noack, Jens (Betreuer)	Bachelor Thesis
2018	Use of supercritical CO2 (scCO2) as extraction agent and reaction solvent: Presentation held at World Congress of Smart Materials, WCSM 2018, BITs 4th Annual World Congress of Smart Materials, March 6-8, 2018, Osaka, Japan Jänisch, Thorsten	Presentation full text
2018	Verfahren und Vorrichtung zur Herstellung von mit einer Tragstruktur versehenen Polymer-Formteilen Baumgärtner, Sebastian; Huber, Timo	Patent full text
2018	Weniger Last beim Lufttransport: Module aus faserverstärkten Thermoplasten können den Frachtraum von Flugzeugen versteifen Joppich, Tobias; Menrath, Andreas; Wippo, Verena; Baumgärtner, Sebastian; Huber, Timo	Journal Article
2018	Wirksame Methoden zur UV-Stabilisierung von Polymer-Oberflächen im Außenbereich Schmid, Helmut; Becker, Wolfgang; Knapp, Sebastian; Koleczko, Andreas	Conference Paper
2018	WITHDRAWN: "Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics" [Composites Part A: Applied Science and Manufacturing 109 (2018) 585-596] Dörr, D.; Henning, F.; Kärger, L.	Journal Article

This publication list has been generated from the publication database Fraunhofer-Publica.

Publications from 2017

Here you can find all publications made by Fraunhofer ICT in 2017.

Year	Title/Author	Document Type
2017	ADN-Prills: Particle properties, stability and sensitivity Heintz, Thomas; Reinhard, Werner; Leisinger, Karlfred; Herrmann, Michael; Heil, Moritz	Conference Paper
2017	Advanced molds and methods for the fundamental analysis of process induced interface bonding properties of hybrid, thermoplastic composites Joppich, T.; Menrath, A.; Henning, F.	Journal Article full text
2017	Ageing of surface coated powders investigated by imaging spectroscopy Pontius, Heike; Dörich, Manuela; Heil, Moritz	Conference Paper
2017	Aging behavior of ADN solid rocket propellants and their glass-rubber transition characteristics Bohn, M.A.; Cerri, S.	Book Article
2017	Aging of standard and insensitive RDX crystals investigated by means of X-ray diffraction Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred; Borne, Lionel	Journal Article
2017	Ammonium dinitramide/glycidyl azide polymer (ADN/GAP) composite propellants with and without metallic fuels Gettwert, V.; Franzin, A.; Bohn, M.A.; DeLuca, L.T.; Weiser, V.	Journal Article
2017	Anion intercalation into a graphite cathode from various sodium-based electrolyte mixtures for dual-ion battery applications Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael	Journal Article
2017	Application of eco-efficiency analysis to assess three different recycling technologies for carbon fiber reinforced plastics (CFRPs) Dieterle, M.; Seiler, E.; Viere, T.	Conference Paper
2017	Arylthio- and Arylseleno-Substituted s-Heptazines Posern, Christian; Böhme, Uwe; Wagler, Jörg; Höhne, Carl-Christoph; Kroke, Edwin	Journal Article
2017	Aus einem anderen Blickwinkel: ORW-Verfahren ermöglicht multiaxiale lokale Verstärkung für RTM-Strukturbauteile Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin	Journal Article
2017	Aus einem anderen Blickwinkel: ORW-Verfahren ermöglicht multiaxiale lokale Verstärkung für RTM-Strukturbauteile Henning, Frank; Thoma, Bernd; Wendel, Rainer; Rosenberg, Philipp; Gresser, Götz; Bauder, Hans-Jürgen; Wolfrum, Jürgen; Caliskan, Metin	Journal Article
2017	Automatisierung eines Prüfstands zur Validierung von Dichtsystemen für Redox-Flow-Batterien Ekinci, Ismet	Bachelor Thesis
2017	Beitrag zur Konsolidierung von thermoplastischen Hochleistungsfaserverbundwerkstoffen Baumgärtner, Sebastian; Henning, F.; Drummer, D.	Dissertation
2017	A benchmark study of finite element codes for forming simulation of thermoplastic UD-tapes Dörr, D.; Brymerski, W.; Ropers, S.; Leutz, D.; Joppich, T.; Kärger, L.; Henning, F.	Journal Article full text
2017	Burning Behavior of ADN-Based Propellants Loaded with Al-Mg Mechanically Activated Powders Cristilli, Francesco	Master Thesis full text
2017	Catalytic oxidation of HTC-waste water in super critical H2O: Poster presented at 50. Jahrestreffen Deutscher Katalytiker, 15.-17. März 2017, Weimar, Germany Jänisch, Thorsten; Graf, Jürgen; Tübke, Beatrice; Pohsner, Ute; Böringer, Sarah	Poster full text
2017	Catalytic oxidation of HTC-waste water in supercritical H2O Jänisch, Thorsten	Conference Paper full text
2017	Chapter 2: Bio-Fiber Thermoset Composites Rajpurohit, A.; Henning, F.	Book Article
2017	Characterization of aging behavior of butacene® based composite propellants by loss factor curves Seyidoglu, T.; Bohn, M.A.	Journal Article
2017	Characterization of gun propellants by long-term mass loss measurements Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A.	Journal Article full text
2017	Characterization of the interlaminar shear strength of fibre metal laminates with reactively processed thermoplastic matrix Werner, H.; Sönmez, I.; Wendel, Rainer; Weidenmann, K.; Henning, Frank	Conference Paper
2017	A comb-like ionomer based on poly(2,6-dimethyl-1,4-phenylene oxide) for the use as anodic binder in anion-exchange membrane direct methanol fuel cells Jurzinsky, T.; Bär, R.; Heppe, N.; Cremers, C.; Tübke, J.	Journal Article
2017	Combustion Behavior of a Metallized ADN/GAP Propellant as a Function of the Aluminum Content and the Binder/Oxidizer Ratio Imiolek, Andreas; Weiser, Volker; Tagliabue, C.; Gettwert, Volker	Conference Paper
2017	Combustion behavior of aluminum particles in ADN/GAP composite propellants Weiser, Volker; Franzin, Andrea; DeLuca, Luigi; Fischer, Sebastian; Gettwert, Volker; Kelzenberg, Stefan; Knapp, Sebastian; Raab, A.; Roth, Evelin; Eisenreich, Norbert	Book Article
2017	Comminution of biogenic materials Eisenlauer, M.; Teipel, U.	Journal Article
2017	Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound Lautenschläger, Miriam	Conference Paper
2017	Comparison of kinetics, oxide crystal growth and diffusivities of nano- and micrometer-sized copper particles on oxidation in air Eisenreich, Norbert; Schulz, Olga; Koleczko, Andreas; Knapp, Sebastian	Journal Article
2017	Comparison of methods for generating the CL-20/HMX-cocrystal Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas	Conference Paper
2017	Compositional graphitic cathode investigation and structural characterization tests for Na-based dual-ion battery applications using ethylene carbonate:ethyl methyl carbonate-based electrolyte Aladinli, Sinan; Bordet, François; Ahlbrecht, Katharina; Tübke, Jens; Holzapfel, Michael	Journal Article
2017	The connection between WLF equation and the Arrhenius equation Bohn, Manfred A.	Conference Paper
2017	Continuous synthesis of UiO-66 in microreactor: Pursuing the optimum between intensified production and structural properties Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.; Piscopo, C.G.	Journal Article
2017	Correlation of high explosive properties with plate dent test results for different geometries Schrabback, M.; Materna, Miriam	Conference Paper
2017	Corrosion of carbon supports, induced by high-temperature PEMFC operating conditions Rau, M.; Jung, F.; Cremers, C.; Tübke, J.	Conference Paper full text
2017	D 5.1 LCA for REE and Mg Recovery Technologies: D 5.1 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Low Cost Salles, Ana; Sgarito, Serena; Forte, Federica; Yurramendi, Lourdes Sarasola	Report
2017	D 5.2 Magnesium Recycling LCA González, Manuel; Val, Diego; Araujo, Blanca; Rodriguez, Alicia; Maroto, Jose Antonio; Salles, Ana; Müller, Torsten	Report
2017	D 6.6 PEDR Plan for the Exploitation and Dissemination of Results Mid Project Report: D 6.6 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Los Cost Lagioia, Rocco; Müller, Torsten; Araujo, Blanca	Report
2017	D1.1 Definition of the starting situation in URBANREC regions Hannich, Ronny	Report full text
2017	D2.3. Mg recycling test unit Val, Diego; Val, Diego; Rodriguez, Alicia; Araujo, Blanca	Report
2017	Darstellung der Eigenschaften von technisch genutztem Balsaholz und daraus resultierende Verwertungsrouten für End-of-Life-Material von Rotorblättern aus Windkraftanlagen.: Projektarbeit an der Beuth Hochschule für Technik Sprengel, Lukas	Report
2017	Detection of Black Plastics in the Middle Infrared Spectrum (MIR) Using Photon Up-Conversion Technique for Polymer Recycling Purposes Becker, Wolfgang; Sachsenheimer, K.; Klemenz, Melanie	Journal Article full text
2017	Development and optimization of the alloying process: D3.1 Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller, Torsten; Lagioia, Rocco	Report
2017	Different polymorphic states of Explosives - A problem of trace detection for inkjet-printed samples Schweikert, Wenka; Ulrich, Christian; Müller, Stefan; Schnürer, Frank	Conference Paper
2017	A direct process to reuse dry fiber production waste for recycled carbon fiber bulk molding compounds Saburow, O.; Huether, J.; Maertens, R.; Trauth, A.; Kechaou, Y.; Henning, F.; Weidenmann, K.A.	Journal Article full text
2017	Effect of mechanical treatment on properties of zeolites with chabazite structure Buzimov, A.Y.; Kulkov, S.N.; Eckl, W.; Pappert, S.; Gömze, L.A.; Kurovics, E.; Kocserha, I.; Geber, R.	Conference Paper full text
2017	Eigenschaftsänderungen von Prüfstäuben durch mechanische Beanspruchung Teipel, Ulrich; Henning, Frank; Cäsar, Markus	Conference Paper
2017	Entwicklung einer Methodik zur quantitativen Analyse von mit dem AKF-Verfahren erzeugten Polymertropfen und Anwendung in Parameterstudie Unger, Nicolas	Master Thesis
2017	Entwicklungsperspektiven für Zellformate von Lithium-Ionen-Batterien in der Elektromobilität Hettesheimer, Tim; Thielmann, Axel; Neef, Christoph; Möller, Kai-Christian; Wolter, Mareike; Lorentz, Vincent; Gepp, Markus; Wenger, Martin; Prill, Torben; Zausch, Jochen; Kitzler, Peter; Montnacher, Joachim; Miller, Martin; Hagen, Markus; Fanz, Patrik; Tübke, Jens	Study full text
2017	Evaluation of ballistic modifier for aluminized ADN/PSAN propellants Tagliabue, C.; Imiolek, A.; Gettwert, V.; Weiser, V.	Conference Paper
2017	Evaluation of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder Bohn, Manfred A.; Lemos, Mauricio Ferrapontoff; Mußbach, Günter	Conference Paper
2017	Evaluation of filler effects on the dynamic mechanical behavior of HTPB-elastomer used as binder in exemplary composite formulations Lemos, M.F.; Mussbach, G.; Bohn, M.A.	Journal Article
2017	Evaluation of the James Initiation Criterion in the 21mm and 50mm PMMA Gap Test Wurster, S.	Journal Article
2017	Experimentelle Charakterisierung von Designvarianten überlappend gefügter Kohlenstofffaserverbundstrukturen im Kontext der Entwicklung neuartiger Drapiertechnologien Fürst, Tobias; Henning, F.; Mitschang, P.	Dissertation
2017	Flexible und dichte keramische Verbundseparatoren für Na-S-Mitteltemperaturzellen Ahlbrecht, Katharina; Hoffmann, M.J.; Tübke, J.	Dissertation
2017	Following the curing of isocyanate-polyol by pressure decrease - influences of activation volume, reaction volume and change in bulk compressibility as well as diffusion control during curing Bohn, Manfred A.	Conference Paper
2017	Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2016/2017 Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Annual Report full text
2017	Funktionsintegrierter Leichtbau: Von der Simulation bis zum Bauteil. Hochleistungs-Faserverbundstrukturen Henning, Frank; Karcher, Michael; Kärger, Luise; Müller, Timo	Book Article
2017	Hexaphenoxycyclotriphosphazene as FR for CFR anionic PA6 via T-RTM: A study of mechanical and thermal properties Höhne, Carl-Christoph; Wendel, Rainer; Käbisch, Bert; Anders, Thorsten; Henning, Frank; Kroke, Edwin	Journal Article
2017	A holistic approach to use multi-scale fractions of dry carbon fibre production waste in filled bulk moulding compounds (BMC) Huether, J.; Maertens, R.; Saburow, O.; Seiler, E.; Aicher, T.; Weidenmann, K.A.	Conference Paper
2017	Hollow microsphere collapse sensitization of emulsion explosives - modeling and experimental results Pimenta, J.; Quaresma, J.; Campos, J.; Deimling, Lukas; Keicher, Thomas	Conference Paper
2017	Hydrogen oxidation reaction under HT-PEMFCs conditions: Inhibition due to fuel contaminants Rau, M.; Jung, F.; Cremers, C.	Conference Paper
2017	Impact of HP-RTM Process Parameters on Mechanical Properties with Epoxy and Polyurethane Systems Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F.	Journal Article
2017	Implementierung & Untersuchung von Aptamer-Modifizierten Dickschichtelektroden zur Elektrochemischen Detektion von Kokain Diebold, Verena	Master Thesis
2017	The influence of concentration, type and particle size of fillers on the dynamic mechanical behaviour of elastomeric HTPB binder Bohn, Manfred A.	Conference Paper
2017	Influence of mechanical activation on the properties of natural zeolites from Tokaj Mountain Buzimov, A.Y.; Kulkov, S.N.; Kurovics, E.; Eckl, W.; Pappert, S.	Conference Paper full text
2017	Influence of mixing ratio on the reaction behavior of ternary thermits Roth, Evelin; Weiser, Volker; Lity, André; Raab, A.	Conference Paper
2017	Influence of the manufacturing process (comparison MuCell and Direct-LFT) of foamed and fiber reinforced polymer sandwich structures on the fiber length Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A.	Conference Paper
2017	Influence of the slurry thickness and heat treatment parameters on the formation of aluminium diffusion coating Bermejo Sanz, Jorge; Roussel Garcia, Raquel; Kolarik, Vladislav; Lorenzo, Maria del Mar Juez	Journal Article
2017	Influence of water during manufacturing of APA6 in the thermoplastic RTM process Wendel, Rainer; Thoma, Bernd; Henning, Frank	Conference Paper
2017	Injection molding of glass fiber reinforced polypropylene composite foams with laminate skins Kasemphaibulsuk, P.; Holzner, M.; Kuboki, T.; Hrymak, A.	Conference Paper
2017	Intrinsic Flammability of Polyurethane Flexible Foams: Poster presented at FRPM 2017, 16th European Meeting on Fire Retardant Polymeric Materials, Manchester, July 3-6, 2017 Höhne, Carl-Christoph; Hanich, Ronny; Kroke, Edwin	Poster full text
2017	Investigation and comparison of known and new ADN stabilizers Heil, Moritz; Müller, C.; Hickmann, J.; Bohn, Manfred A.	Conference Paper
2017	Investigation of ageing behaviour of plasticised nitrocellulose - accelerated ageing and real ageing Bohn, Manfred A.	Conference Paper
2017	Investigation of extinguished ADN/HTPB propellants with a special focus on sub-surface reactions Weiser, Volker; Christilli, F.; Gettwert, Volker; Imiolek, Andreas; Kröber, Hartmut; Tagliabue, C.	Conference Paper
2017	Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process Behnisch, F.; Rosenberg, P.; Weidenmann, A.K.; Henning, F.	Conference Paper
2017	Investigation of the wetting behavior of Na and Na alloys on uncoated and coated Na-beta"-alumina at temperatures below 150 A degrees C Ahlbrecht, K.; Bucharsky, C.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J.	Journal Article
2017	Kalibrierung von Temperatur- und Klimaprüfschränken Cäsar, Joachim	Conference Paper
2017	Luftschadstoffe im Innen- und Außenbereich - Problembeschreibung und Lösungsansätze Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian	Conference Paper
2017	A macroscopic approach to simulate the forming behaviour of stitched unidirectional non-crimp fabrics (UD-NCF) Schirmaier, F.J.; Dörr, D.; Henning, F.; Kärger, L.	Journal Article
2017	Material compatibility of ORC working fluids with polymers Eyerer, S.; Eyerer, P.; Eicheldinger, M.; Sax, S.; Wieland, C.; Spliethoff, H.	Journal Article full text
2017	Material properties of electrodes for photovoltaic-coupled polymer electrolyte membrane water electrolysis Baumann, Nils; Stelter, M.; Tübke, J.	Dissertation full text
2017	Material selection for CFRP-aluminium-foam-sandwiches manufactured by a PUR spraying process Rupp, P.; Elsner, P.; Weidenmann, K.A.	Conference Paper
2017	Mechanical properties of Desmophen-2200® based elastomer samples plasticized with energetic ionic liquids Lemos, M.F.; Bohn, Manfred A.; Schaller, Uwe	Conference Paper
2017	Medium-temperature molten sodium batteries with aqueous bromine and iodine cathodes Holzapfel, M.; Wilde, D.; Hupbauer, C.; Ahlbrecht, K.; Berger, T.	Journal Article
2017	Mg+REE alloying process test unit: D3.2 Val, Diego; Val, Diego; Araujo, Blanca; Rodriguez, Alicia; García, Jose Manuel	Report
2017	Microwave energy assisted synthesis of poly lactic acid via continuous reactive extrusion: Modelling of reaction kinetics Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Bergmann, B.; Trinh, G.; David, C.	Journal Article full text
2017	Modeling and validation of gripper induced membrane forces in finite element forming simulation of continuously reinforced composites Poppe, C.; Joppich, T.; Dörr, D.; Kärger, L.; Henning, F.	Conference Paper
2017	Modeling of the non-isothermal crystallization kinetics of polyamide 6 composites during thermoforming Kugele, D.; Dörr, D.; Wittemann, F.; Hangs, B.; Rausch, J.; Kärger, L.; Henning, F.	Conference Paper
2017	Modeling, simulation and characterization of complex shaped solid propellant combustion Wurster, S.	Journal Article
2017	Modelling of Thermite Mixtures Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Roth, Evelin; Weiser, Volker	Conference Paper
2017	Möglichkeiten der Verfahrensintensivierung von reaktiven Extrusionen am Beispiel der Herstellung von Polylactid Bergmann, Björn; Elsner, P.; Teipel, U.	Dissertation full text
2017	New benchmark in the tailored blank manufacturing - high volume production in an exceptional quality Graf, Matthias; Baumgärtner, Sebastian; Henning, Frank	Conference Paper
2017	Nitrocellulose and stabilizers: DFT calculations of bond dissociation and reactions Nardai, Michael M.; Bohn, Manfred A.	Conference Paper
2017	Nitrocellulose decomposition quantum mechanical calculations Nardai, Michael M.; Bohn, Manfred A.	Conference Paper
2017	Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design Schladitz, Katja; Büter, Andreas; Godehardt, Michael; Wirjadi, Oliver; Fleckenstein, Johanna; Gerster, Tobias; Hassler, Ulf; Jaschek, Katrin; Maisl, Michael; Maisl, Ute; Mohr, Stefan; Netzelmann, Udo; Potyra, Tobias; Steinhauser, Martin O.	Journal Article
2017	On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L.	Conference Paper
2017	Oxidation of La-Sr-Mn-coated interconnector alloys for steam electrolysis under pressure in pure oxygen and in pure steam Lorenzo, Maria del Mar Juez; Kolarik, Vladislav; Kuchenreuther-Hummel, Veronika; Pötschke, Martin; Schimanke, Danilo	Journal Article
2017	Phenomena in combustion of propellants and explosives: Dedicated: 85th Birthday of Gennady V. Sakovich Koleczko, Andreas; Eisenreich, Norbert; Vorozhtsov, Alexander B. ; Tomsk State University	Book
2017	Polymerelektrolyt-Brennstoffzellensystem für ein autonomes Unterwasserfahrzeug Hitscherich, Manuel; Stolten, D.; Scherer, V.	Dissertation full text
2017	Positive weathering results as milestones in the development of thermochromic nanocoatings Schmid, Helmut	Conference Paper
2017	Production and comparison of artificially aged microplastic particles Patzak, Carolin; Reichert, Thomas; Forberger, Jens	Conference Paper
2017	Produktgestaltung in der Partikeltechnologie. Bd.8: 22. und 23. Juni 2017, Achat Plaza, Karlsruhe Teipel, Ulrich; Türk, Michael	Conference Proceedings
2017	Prozesskette zur Herstellung textiler 3D-Preforms: Einsatz der Tufting- und Partikelschaumtechnologie zur sequenziellen Umformung textiler Halbzeuge Schöfer, S.; Schmitz, M.; Gries, T.; Mack, C.; Basler, A.	Journal Article
2017	Pull-out testing of multiscale structured metallic z-reinforcements for CFRP laminates Juergens, M.; Hafe Pérez Ferreira da Silva, M.T. von; Heimbs, S.; Lang, H.; Ladstaetter, E.; Hombergsmeier, E.	Journal Article
2017	Quantitative kinetic analysis of a PdAu3 alloy catalyst for oxygen electro-reduction Kurnatowski, Martin von; Bortz, Michael; Klein, Peter; Kintzel, Birgit; Cremers, Carsten	Journal Article
2017	The REACH impact on gun propellant formulations Böhnlein-Mauß, Jutta; Kröber, Hartmut	Journal Article
2017	Real-time spectroscopy enabled by external cavity QCLs with MOEMS diffraction gratings Butschek, Lorenz; Hugger, Stefan; Jarvis, Jan-Philip; Härtelt, Marko; Merten, André; Grahmann, Jan; Boskovic, Dusan; Fuchs, Frank; Ostendorf, Ralf; Schilling, Christian; Rattunde, Marcel; Wagner, Joachim	Conference Paper
2017	REE recovery technology demonstrator: D1.4 Sgarioto, Serena; Lagioia, Rocco; Claudia, Ana; Müller, Torsten	Report
2017	Remarks on the Evolution of Explosives: Editorial Homburg, A.	Journal Article full text
2017	Revealing the initial reaction behavior in the continuous synthesis of metal-organic frameworks using real-time synchrotron X-ray analysis Polyzoidis, Angelos; Etter, Martin; Herrmann, Michael; Löbbecke, Stefan; Dinnebier, Robert E.	Journal Article
2017	Rheological In-Mold Measurements and Characterizations of Sheet-Molding-Compound (SMC) Formulations with Different Constitution Properties by Using a Compressible Shell Model Hohberg, Martin; Kärger, Luise; Bücheler, David; Henning, Frank	Journal Article full text
2017	The role of phosphate additive in stabilization of sulphuric-acid-based vanadium(V) electrolyte for all-vanadium redox-flow batteries Roznyatovskaya, Nataliya V.; Roznyatovsky, Vitaly A.; Höhne, Carl-Christoph; Fühl, Matthias; Gerber, Tobias; Küttinger, Michael; Noack, Jens; Fischer, Peter; Pinkwart, K.; Tübke, J.	Journal Article
2017	Safety-related design of the process chain for a robotic recovery and disposal process from ammunition and explosives handling to disposal Müller, Paul; Keßler, Armin	Conference Paper
2017	Scaling of magnesium recycling and alloying procedures: D4.1 Val, Diego; Val, Diego; Araujo, Blanca; Rodriguez, Alicia; García, Jose Manuel	Report
2017	Simulation of the influence of embedded inserts on the RTM filling behavior considering local fiber structure Seuffert, J.; Kärger, L.; Henning, F.	Conference Paper
2017	Solid propellant burn rate measurement in a micro closed bomb Wurster, S.	Conference Paper
2017	Solid-liquid adhesion energies of composite propellant components determined by solution calorimetry Nardai, Michael M.; Bohn, Manfred A.	Journal Article
2017	Subcop - protection against suicide bomber attacks Bernewitz, Johanna; Armbrust, Torsten; Hummel, Marc; Klemenz, Melanie; Neutz, Jochen; Roussel Garcia, Raquel	Conference Paper full text
2017	Supported IrxRu1-xO2 anode catalysts for PEM-water electrolysis Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens	Journal Article full text
2017	Synthesis of P(GAP-CO-EPH) - an energetic copolyether suitable for cast-cure applications Hafner, Sven; Keicher, Thomas	Conference Paper
2017	Thermal behavior of ADN & ADN prills - crystal and micro structure. Part I Herrmann, Michael; Förter-Barth, Ulrich; Kempa, Paul-Bernd; Heintz, Thomas	Conference Paper
2017	Thermal characterization of polyurethane foams with phase change material Amaral, C.; Vicente, R.; Eisenblätter, J.; Marques, P.A.A.P.	Journal Article
2017	Turbidimetric method for the determination of particle sizes in polypropylene/clay-composites during extrusion Becker, Wolfgang; Guschin, Viktor; Mikonsaari, Irma; Teipel, Ulrich; Kölle, Sabine; Weiss, Patrick	Journal Article full text
2017	Untersuchung des Einflusses von mineralischen Additiven auf die mechanischen Eigenschaften von Polylactid Peters, Jenny; Holzer, Andrei (Betreuer); Winkelmann, Felix (Gutachter)	Bachelor Thesis full text
2017	Untersuchungen an Anodenmaterialien für die Alkalische Direkt-Methanol-Brennstoffzelle Jurzinsky, Tilman; Elsner, P.; Roth, C.	Dissertation
2017	Vanadium proton exchange membrane water electrolyser Noack, J.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J.	Journal Article
2017	Verfahren und Vorrichtung zur Konsolidierung von imprägnierten Faserverbundstrukturen Baumgärtner, Sebastian; Henning, Frank; Lohr, Christoph	Patent full text
2017	Verfahren und Vorrichtung zur Prüfung der Staubdichtigkeit und / oder des Staubadsorptionsvermögens von Gegenständen Cäsar, Joachim; Teipel, Ulrich	Patent full text
2017	Verwendung von offen strukturierten, hydrophil modifizierten, mesoporösen Mikro-SiO2-Partikeln zur Abwehr von Hagel und/oder zur Auslösung der Abregnung einer Gewitterwolke und Verfahren zur Herstellung besagter Partikel Schmid, Helmut; Eckl, Wilhelm; Inone-Kauffmann, Emilia Regina	Patent full text
2017	A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites Dörr, D.; Schirmaier, F.J.; Henning, F.; Kärger, L.	Journal Article

This publication list has been generated from the publication database Fraunhofer-Publica.

Publications from 2016

Here you can find all publications made by Fraunhofer ICT in 2016.

Year	Title/Author	Document Type
2016	4. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2016: 17./18. Februar 2016, Evangelische Akademie Tutzing Teipel, Ulrich; Reller, Armin ; Univ. Augsburg; Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal; Georg-Simon-Ohm-Hochschule, Nürnberg	Conference Proceedings
2016	Accelerated aging and cure kinetics of butacene® containing composite propellants Seyidoglu, Tijen; Bohn, Manfred A.; Mußbach, Günter	Conference Paper full text
2016	Accurate cure modeling for isothermal processing of fast curing epoxy resins Bernath, A.; Kärger, L.; Henning, F.	Journal Article full text
2016	Advanced approaches to the CL-20/HMX cocrystal Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas	Conference Paper full text
2016	Analyse der Fließfrontprogression während des Injektionsprozesses lokal verstärkter Kohlenstofffaserhalbzeuge im RTM-Verfahren Stanglmaier, S.; Vukoje, D.; Bickerton, S.; Hodde, J.; Repper, A.; Thoma, B.; Henning, F.	Journal Article
2016	Analysis of CIE-color values using the example of tracer munition Knapp, Sebastian; Bieroth, D.; Kelzenberg, Stefan; Lity, André; Poth, H.; Raab, Angelika; Roth, Evelin; Weiser, Volker	Conference Paper full text
2016	Analysis of fiber orientation, microstructure and mechanical properties of specimens made from fiber-reinforced ABS manufactured by Fused Filament Fabrication (FFF) Weidenmann, K.A.; Baumann, S.; Pinter, P.; Elsner, P.	Conference Paper
2016	Analyzing the migration of plasticizers in powders by imaging spectroscopy Pontius, Heike; Dörich, Manuela; Heil, Moritz	Conference Paper full text
2016	Applications of Lignin Materials and Their Composites (Lignin Applications in Various Industrial Sectors, Future Trends of Lignin and Their Composites) Naegele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffmann, E.R.; Eisenreich, N.	Book Article
2016	Batch versus flow acetalization of benzaldehyde with HKUST-1: Diffusion pathways and performance comparison Piscopo, Calogero Giancarlo; Schwarzer, M.; Herrmann, Michael; Affini, Anna; Pelagatti, Paolo; Maestri, Giovanni; Maggi, Raimondo; Löbbecke, Stefan	Journal Article
2016	Beitrag zur Umsetzung, Charakterisierung und Evaluierung eines Direktverfahrens zur Herstellung von strukturellen Bauteilkomponenten aus kohlenstofffaserverstärktem Kunststoff (InlinePrepreg) Karcher, Michael; Henning, Frank; Büter, A.	Dissertation
2016	Bestimmung der Aushärtekinetik eines 2-stufig aushärtenden Epoxidharzes zur Herstellung von Hochleistungsfaserverbunden Karcher, Michael; Chaloupka, Alexander; Henning, Frank; Schmölzer, Stefan; Moukhina, Elena	Journal Article
2016	Bifunktionelle Synthesebausteine durch hydrothermale VerflÃ¼ssigung von Organosolv-Lignin Dahmen, N.; Hornung, U.; Schuler, J.; Schmiedl, D.; Rohde, V.	Journal Article
2016	Burning behavior of AN/ADN propellants Tagliabue, C.; Weiser, Volker; Imiolek, Andreas; Bohn, Manfred A.; Heintz, Thomas; Gettwert, Volker	Conference Paper full text
2016	Characterisation and modelling of the curing reaction of HTPB with isocyanates by reaction heat determined by heat flow microcalorimetry and by volume shrinkage determined with a pressure curing cell Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter	Conference Paper full text
2016	Characterisation of different gun propellants by long-term mass loss Heil, Moritz; Wimmer, Ann-Kathrin; Bohn, Manfred A.	Conference Paper full text
2016	Characterisation of the curing reaction of HTPB with isocyanate by heat flow microcalorimetry Bohn, Manfred A.	Conference Paper
2016	Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF) Schirmaier, F.J.; Weidenmann, K.A.; Kärger, L.; Henning, F.	Journal Article
2016	Characterization of membrane electrode assemblies for high-temperature PEM fuel cells Rau, M.; Niedergesäß, A.; Cremers, Carsten; Alfaro, S.; Steenberg, T.; Hjuler, H.A.	Journal Article
2016	Characterization of metal-organic frameworks using X-ray diffraction Herrmann, Michael; Kempa, Paul-Bernd; Fietzek, Harald; Altenburg, Thomas; Polyzoidis, Angelos; Piscopo, Calogero Giancarlo; Löbbecke, Stefan	Journal Article
2016	Characterization of nanoparticle layers deposited by wire explosions Knapp, Sebastian; Eickershoff, B.; Eißler, Carmen; Fietzek, Harald; Günthner, Christian; Koleczko, Andreas; Schuppler, Heike	Conference Paper full text
2016	Characterization of several HTPB binder samples by NMR, GPC and OH-number Kaiser, M.; Ditz, B.; Dörich, Manuela; Bohn, Manfred A.	Conference Paper full text
2016	Cohesive zone model parameterization by molecular dynamics Nardai, Michael M.; Bohn, Manfred A.	Conference Paper
2016	Combining wave and spectroscopic techniques to monitor the development of thermosets during cure Puentes, J.; Wruck, L.; Chaloupka, A.; Rudolph, N.; Osswald, T.A.	Conference Paper
2016	Comparative NMR study of nPrBTP and iPrBTP Adam, C.; Rohde, V.; Müllich, U.; Kaden, P.; Geist, A.; Panak, P.J.; Geckeis, H.	Journal Article full text
2016	Composite materials ready to replace aluminium in internal combustion engines Keyser, H. de; Berg, L.-F.; Stammler, J.	Journal Article
2016	Consumption of atmospheric oxygen as ageing indicator of HTPB-based solid rocket propellants Mußbach, Günter; Bohn, Manfred A.	Conference Paper
2016	Consumption of Atmospheric Oxygen as Ageing Indicator of HTPB-based Solid Rocket Propellants Mußbach, Günter; Bohn, Manfred A.	Conference Paper full text
2016	Continuous microreactor synthesis of ZIF-8 with high space-time-yield and tunable particle size Polyzoidis, Angelos; Altenburg, T.; Schwarzer, M.; Löbbecke, Stefan; Kaskel, S.	Journal Article
2016	Cyclotriphosphazene und deren Potential als Flammschutzmittel in Polymeren Käbisch, Bert	Dissertation
2016	D 6.3 Communication Plan: D 6.3 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Los Cost Lagioia, Rocco; Müller, Torsten; Rivas, Ana	Report
2016	D 6.4 PEDR Plan for the Exploitation and Dissemination of Results: D 6.4 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Los Cost Lafioia, Rocco; Müller, Torsten	Report
2016	D 7.1 First Progress Report Part B: D 7.1 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Low Cost Rodriguez, Alicia; Araujo, Blanca; González, Manuel; Maroto, Jose Antonio; Val, Diego; García, Jose Manuel; Müller Thorsten; Lagioia, Rocco	Report
2016	D1.2 REE Balance Problem Analysis Binnemans, Koen; Jones, Peter Tom; Yurramendi, Lourdes; Müller, Torsten	Report
2016	D2.2 Magnesium Recycling Routes Optimization Rodriguez, Alicia; San José, Ruth; Rodriguez, Alicia; San José, Ruth; Müller, Torsten	Report
2016	D3.1 Report on the capabilities, facilities, networking and funding sources of the consortium partners in the field of forest biomass secondary processing Nikkanen, Ville; Mikonsaari, Irma; Moser, Kevin; Reinhardt, Sebastian; Roßberg, Christine; Bruyne, F. de; Anghel, N.; Rautio, J.; Härkönen, M.; Tukiainen, P.; Gravitis, J.; Andzs, M.; Ubele, D.; Tschentscher, R.; Aasen, I.-M.; Balzer Le, S.; Joffres, B.; Johnson, K.; Mackintosh, W.; Joelson, J.; Söderberg, D.; Garcia Jaca, J.; Silva Perez, D. da; Malin, M.	Report full text
2016	Data interpretation and comparison of DMA results from HTPB-IPDI bonded composite elastomer samples used in an international Round Robin Test Bohn, Manfred A.; Kronis-Rudigier, Gunnar; Mußbach, Günter	Conference Paper full text
2016	Debond on command: Fast debonding by exothermic reaction due to microwave activation Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan	Conference Paper full text
2016	Debonding using exothermic reactions Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan	Journal Article
2016	Deliverable 4.2. Report on other main European and global players in the field of separation and downstream processing Nikkanen, Ville; Böringer, Sarah; Roßberg, Christine; Fornell, R.; Johnson, K.; MacIntosh, W.; Illergard, J.; Tschentscher, R.; Joffres, B.; Hesser, F.; Hedeler, B.; Andzs, M.; Spiridon, I.; Stelian, V.; Bruyne, F. de; Azpeitia, M.; Ipinazar, E.; Grönroos, A.; Tukiainen, P.; Härkönen, M.; Malin, M.	Report full text
2016	Design, fabrication and embedding of microscale interdigital sensors for real-time cure monitoring during composite manufacturing Moghaddam, M.K.; Breede, A.; Chaloupka, A.; Bödecker, A.; Habben, C.; Meyer, E.-M.; Brauner, C.; Lang, W.	Journal Article
2016	Detection of capacity imbalance in vanadium electrolyte and its electrochemical regeneration for all-vanadium redox-flow batteries Roznyatovskaya, N.; Herr, T.; Küttinger, M.; Fühl, M.; Noack, J.; Pinkwart, K.; Tübke, J.	Journal Article
2016	Development of a novel consolidation process for continuous-fiber-reinforced thermoplastics Baumgärtner, S.; Lohr, C.; Henning, F.	Conference Paper
2016	Development study of an air independent fuel cell system for an autonomous underwater vehicle (AUV) Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J.	Conference Paper
2016	Diffusion and lifetime modeling for slurry aluminide coating on P92 at 650°C with a computational and experimental approach Krukovskyi, P.; Metel, M.; Agüero, A.; Muelas, R.; Kolarik, V.	Journal Article
2016	Direct adhesion of CFR-thermoplast on steel - testing and simulation of the lap shear fracture Yüksel, F.; Hinterhölzl, R.; Drechsler, K.	Conference Paper
2016	Direct Simulation of PBX Uniaxial Tensile Testing by Molecular Dynamics Nardai, Michael M.; Bohn, Manfred A.	Conference Paper full text
2016	Dispergierung und Eigenschaften von Carbon Nanotubes Dresel, A.; Teipel, U.	Journal Article
2016	Durch exotherme Reaktionen schnell entkleben Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkler, Andreas; Kahlmeyer, Martin; Böhm, Stefan	Journal Article
2016	Dynamic mechanical analysis of nitrocellulose-plasticizer mixtures: Abstract Mitró, Daniel; Böhnlein-Mauß, Jutta	Abstract full text
2016	Effect of Butacene® on ageing of composite propellants Seyidoglu, Tijen; Bohn, Manfred A.	Conference Paper
2016	Effect of different technological and energy supply related measures on the primary energy demand of CFPR production Wehner, Daniel; Hohmann, Andrea; Schwab, Bernhard; Albrecht, Stefan; Ilg, Robert; Sedlbauer, Klaus; Leistner, Philip; Drechsler, Klaus	Conference Paper
2016	Effect of model fuel impurities for reformed jet fuels on the hydrogen oxidation at platinum based catalysts under HT-PEMFC conditions Cremers, C.; Rau, M.S.; Niedergesäß, A.; Pinkwart, K.; Tübke, J.	Conference Paper
2016	The efficient route to tailored Organo Sheets: Producing CFRP efficiently in a vacuum using infrared radiation Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin	Journal Article full text
2016	Effizient zum maßgeschneiderten Organoblech: Wirtschaftliche CFK-Herstellung im Vakuum mit Infrarotstrahlung Baumgärtner, Sebastian; John, Jennifer; Henning, Frank; Huber, Timo; Hangs, Benjamin	Journal Article full text
2016	EILs - suitable substances for future energetic applications? Schaller, Uwe; Keicher, Thomas; Krause, Horst; Schlechtriem, S.	Conference Paper full text
2016	Einfluss der Eindickung von dichtereduziertem Sheet Moulding Compound auf die Formteilwelligkeit Keckl, Christoph; Henning, F.; Mitschang, P.	Dissertation full text
2016	Einsatz der ortsaufgelösten Röntgenbeugung zur Untersuchung der Destabilisierungstiefe von Wärmedämmschichten Kolarik, Vladislav; Kuchenreuther, V.; Juez-Lorenzo, Maria; Fietzek, Harald; Stamm, W.	Abstract
2016	Emission spectroscopy on pyrotechnic mixtures Knapp, Sebastian; Günthner, Christian; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Weiser, Volker	Conference Paper full text
2016	Energetic Materials. Synthesis, Characterization, Processing: 47th International Annual Conference of ICT, June 28 to July 1, 2016, Karlsruhe, Germany, Proceedings Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Conference Proceedings
2016	Energetic Nanomaterials: Synthesis, Characterization, and Application Zarko, V.E.; Gromov, A.A.	Book
2016	Energieeffiziente Herstellung komplexer Hochleistungsfaserverbundbauteile mittels Pultrusion, In-Line Flechten, Blasumformung und Endbearbeitung (PulForm) Bezerra, Renato	Report
2016	Energy efficiency and ecological benefits of a self-heated CFRP tool designed for resin transfer moulding Arikan, E.; Hohmann, A.; Kammerhofer, P.; Reppe, M.; Remer, N.; Drechsler, K.	Conference Paper
2016	Entkleben unter Nutzung exothermer Reaktionen Sims, Stefan; Gettwert, Volker; Urban, Helfried; Winkel, Andreas; Kahlmeyer, Martin; Böhm, Stefan	Journal Article
2016	Entwicklung einer Debonding-on-Demand-Konzeptlösung unter Verwendung funktioneller Suszeptor-Additivmaterialien zur Erzeugung von Thermoschocks Sauer, Michael; Horn, S.; Drechsler, K.	Master Thesis
2016	Entwicklung eines Design for End of Life Tools für die Luftfahrtindustrie Wimmer, A.K.; Salles, A.; Müller, T.; Elsner, P.	Journal Article
2016	Ergebnisse einer Befragung zum Umgang mit Porenbetonabfällen aus dem Abbruch von Gebäuden Stier, Christian; Forberger, Jens	Journal Article
2016	Ethanol oxidation reaction (EOR) investigation on Pt/C, Rh/C, and Pt-based bi- and tri-metallic electrocatalysts: A DEMS and in situ FTIR study Bach Delpeuch, A.; Maillard, F.; Chatenet, M.; Soudant, P.; Cremers, C.	Journal Article
2016	European training network to accelerate the development chain of nanostructured polymers: Periodic Technical Report, Part B Hübner, Christof	Report
2016	Evaluation of Different Commercially Available Surface-Enhanced Raman Spectroscopy (SERS) - Substrates and Improved Methods for Detection of Explosives: Abstract Schweikert, Wenka; Mendl, A.; Eichberger, Sascha	Abstract full text
2016	Evaluation of metal-organic frameworks for gas-phase preconcentration and sample enrichment by inverse gas chromatography (IGC) Rieger, Max; Wittek, Michael; Schnürer, Frank; Löbbecke, Stefan	Conference Paper full text
2016	Experimental analysis of gaps and overlaps caused by intra-ply sectorization in the thermoplastic automated fiber placement process Zenker, T.; Schuerger, C.; Drechsler, K.	Conference Paper
2016	Experimental investigation of the radius forming behavior of fiber reinforced thermoplastics Schug, A.; Hinterhölzl, R.; Drechsler, K.	Conference Paper
2016	Explosives Meyer, R.; Köhler, J.; Homburg, A.	Book
2016	Fast heating of selective adsorber beads for large volume application Heil, Moritz; Baumann, Sascha; Krause, Horst	Conference Paper full text
2016	Feinzerkleinerung lignocellulosehaltiger Rohstoffe Eisenlauer, M.; Teipel, U.	Journal Article
2016	First verification of the modified hartmann-apparatur with aluminum and magnesium particles Kuchenreuther-Hummel, V.; Schneider, M.; Liehmann, M.; Neutz, J.	Conference Paper full text
2016	Flexible intelligente Bearbeitungstechnologien für komplexe Faserverbundbauteile: FlexiCut Drechsler, Klaus	Book
2016	Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2015/2016 Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Annual Report full text
2016	Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine: Technological material tests. Deliverable: D4.1; 12 December 2016. Hercules-2 Project Kuhlen, Karl Gerhard	Report
2016	Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine: Partner Periodic Report #1; Period 1.May 2015 to October 2016 Kuhlen, Karl Gerhard	Report
2016	Gasgenerator-Treibstoff auf der Basis von Ammoniumdinitramid (ADN) und Verfahren zu seiner Herstellung Krause, Horst; Schlechtriem, Stefan; Weiser, Volker; Schaller, Uwe; Hürttlen, Jürgen	Patent full text
2016	Gestaltabweichungen dünnwandiger, lokal verstärkter CF/PPS Gelegelaminate Hangs, Benjamin; Henning, F.; Ermanni, P.	Dissertation
2016	Green liquid propellant oxidizers basing on solutions of ADN and an in commercial hydrogen peroxide for hypergolic propellants Weiser, Volker; Hürttlen, Jürgen; Schaller, Uwe; Imiolek, Andreas; Lity, André; Kelzenberg, Stefan	Conference Paper full text
2016	Hand in Hand zu Serienlösungen Karcher, Michael; Huber, Timo; Thoma, Bernd	Journal Article
2016	Highly-active Pd-Cu electrocatalysts for oxidation of ubiquitous oxygenated fuels Serov, A.; Asset, T.; Padilla, M.; Matanovic, I.; Martinez, U.; Roy, A.; Artyushkova, K.; Chatenet, M.; Maillard, F.; Bayer, D.; Cremers, C.; Atanassov, P.	Journal Article
2016	Hot spots sensitization and optical detonation measurements of emulsion explosives Quaresma, J.; Campos, J.; Pimenta, J.; Ribeiro, A.; Mendes, R.; Gois, J.; Deimling, Lukas; Keicher, Thomas	Conference Paper full text
2016	Hybrid resin improves position and alignment of continuously reinforced prepreg during compression co-molding with sheet molding compound Bücheler, D.; Henning, F.	Conference Paper
2016	Impact of water adsorbates on the acetaldehyde oxidation reaction on Pt- and Rh-based multimetallic electrocatalysts Bach Delpeuch, A.; Cremers, C.; Chatenet, M.	Journal Article
2016	In-situ Characterization of Curing Reaction of GAP and Isocyanates by Near Infrared Spectroscopy Imiolek, Andreas; Becker, Wolfgang; Sachsenheimer, K.; Weiser, Volker	Conference Paper full text
2016	In-situ detection of phase transitions of semi-crystalline carbon fiber reinforced thermoplastics using dielectric analysis and its correlation to DMA and DSC Chaloupka, A.; Grund, D.; Wedel, A.; Rudolph, N.M.; Drechsler, K.	Conference Paper full text
2016	In-situ Überwachung der kontinuierlichen Synthese van ZIF-8 Polyzoidis, Angelos; Dinnebier, Robert E.; Herrmann, Michael; Piscopo, Calogero Giancarlo; Löbbecke, Stefan	Abstract full text
2016	Industrial waste residues evaluation: D 1.1 Sgarioto, Serena; Binnemans, Koen; Yurramendi, Lourdes; Müller, Torsten	Report
2016	Influence of aging on the burning behavior of ferrocene-type catalyzed composite rocket propellants Imiolek, Andreas; Bohn, Manfred A.; Weiser, Volker; Seyidoglu, Tijen	Conference Paper
2016	The influence of Al4C3 nanoparticles on the physical and mechanical properties of metal matrix composites at high temperatures Vorozhtsov, S.; Kolarik, V.; Promakhov, V.; Zhukov, I.; Vorozhtsov, A.; Kuchenreuther-Hummel, V.	Journal Article full text
2016	Influence of charge size on enhanced blast explosives Gerber, P.; Happ, A.	Abstract full text
2016	Influence of epoxy- and polyamide-compatible carbon fiber sizings on interfacial fracture toughness and in-plane shear properties of carbon fiber reinforced polyamide-6 Greisel, M.; Kurek, A.; Chaloupka, A.; Moosburger-Will, J.; Mueller, W.M.; Sause, M.G.R.; Horn, S.	Conference Paper
2016	The influence of mass-transport conditions on the ethanol oxidation reaction (EOR) mechanism of Pt/C electrocatalysts Bach Delpeuch, A.; Jacquot, M.; Chatenet, M.; Cremers, C.	Journal Article
2016	Influence of various binders and oxidizers on the spectral emission of pyro-organic flares Roth, E.; Weiser, Volker; Raab, Angelika; Lity, André	Conference Paper full text
2016	Innovative Technologien für Ressourceneffizienz - Strategische Metalle und Mineralien: Ergebnisse der Fördermaßnahme r3; mit CD-ROM Dürkoop, A.; Brandstetter, C.P.; Gräbe, G.; Rentsch, L.	Book full text
2016	Integrated pre-concentrator gas sensor microsystem for ppb level benzene detection Leidinger, M.; Rieger, M.; Sauerwald, T.; Alépée, C.; Schütze, A.	Journal Article
2016	Integrated pre-concentrator gas sensor system for improved trace gas sensing performance Leidinger, M.; Sauerwald, T.; Schütze, A.; Alepee, C.; Rieger, M.	Conference Paper
2016	The interface of CFRP face sheets and aluminum foam cores in hybrid sandwich panels manufactured by a PUR spraying process Rupp, P.; Wafzig, F.; Weidenmann, K.A.	Conference Paper
2016	INTRA r³+ - Integration und Transfer der r³-Fördermaßnahme: Projektlaufzeit: 01.11.2011 - 31.08.2016 Dürkoop, Anke; Büttner, Philipp; Albrecht, Stefan; Brandstetter, Christian P.; Erdmann, Martin; Gräbe, Gudrun; Moller, Björn; Höck, Michael; Kleeberg, Kirstin; Rentsch, Lars; Schneider, Katja; Ostertag, Katrin; Pfaff, Matthias; Sartorius, Christian; Tercero Espinoza, Luis A.; Szurlies, Michael; Wilken, Hildegard	Book Article
2016	Investigation of nitromethane as an ingredient in gelled propellants Schaller, Uwe; Hürttlen, Jürgen; Keicher, Thomas	Conference Paper
2016	Investigation of ruthenium promoted palladium catalysts for methanol electrooxidation in alkaline media Jurzinsky, T.; Kammerer, P.; Cremers, C.; Pinkwart, K.; Tübke, J.	Journal Article
2016	Investigation on the structural behavior of a metallically 3D-reinforced CFRP/CFRP joint using a variable search based on finite element analyzes Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Hinterhölzl, R.; Drechsler, K.	Journal Article
2016	Kontrolle mikrobieller Umwelteinflüsse auf Produkte und Prozesse Schmid, Helmut; Koleczko, Andreas; Knapp, Sebastian	Conference Paper
2016	Layup and process dependent wrinkling behavior of PPS/CF UD tape-laminates during non-isothermal press forming into a complex component Joppich, T.; Doerr, D.; Meulen, L. van der; Link, T.; Hangs, B.; Henning, F.	Conference Paper
2016	Leichtbaupotenzial langfaserverstärkter Thermoplaste (LFT) in Integralschaumbauweise hergestellt durch Schaumspritzgießen mit Dekompressionshub Roch, Alexander; Elsner, Peter; Drummer, D.; Henning, Frank	Dissertation full text
2016	Magnesium dross and scrapquality: D2.1 Rivas, Ana; Alcalde, Estíbaliz; San José, Ruth; Rivas, Ana; Val, Diego; Alcalde, Estíbaliz; San José, Ruth; Müller, Torsten	Report
2016	Manfred Held, a life devoted to explosives science. Editorial Eisenreich, N.	Journal Article
2016	Mass flow measurements on airbag inflators Arce, Yurrita P.; Klahn, Thorsten; Deimling, Lukas; Roussel Garcia, Raquel; Schreiber, Achim	Conference Paper full text
2016	Measuring where it counts: Real-time monitoring of polymers during extrusion for more effective compounding Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiß, Patrick; Baumann, Sascha	Journal Article full text
2016	Mechanical properties of unidirectional continuous carbon fiber reinforced sheet molding compounds Trauth, A.; Bücheler, D.; Henning, F.; Weidenmann, K.A.	Conference Paper
2016	Membrane electrode assemblies for water electrolysis using WO3-supported IrxRu1-xO2 catalysts Baumann, Nils; Cremers, Carsten; Pinkwart, Karsten; Tübke, Jens	Journal Article
2016	Methanol oxidation on PdRh/C electrocatalyst in alkaline media: Temperature and methanol concentration dependencies Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Tübke, J.	Journal Article
2016	Methanol oxidation on Ru- or Ni-modified Pd-electrocatalysts in alkaline media: A comparative differential electrochemical mass spectrometry study Jurzinsky, T.; Kintzel, B.; Bär, R.; Cremers, C.; Pinkwart, K.; Tübke, J.	Conference Paper
2016	A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature Dörr, D.; Joppich, T.; Schirmaier, F.; Mosthaf, T.; Kärger, L.; Henning, F.	Conference Paper
2016	Mittendrin statt nur dabei: Echtzeitüberwachung von Polymeren während der Extrusion für effektivere Compoundierung Bergmann, Björn; Mikonsaari, Irma; Guschin, Viktor; Weiß, Patrick; Baumann, Sascha	Journal Article full text
2016	Modelling and simulation of the pultrusion process with closed injection and impregnation molds Bezerra, R.; Henning, F.	Conference Paper
2016	Modelling and validation of synthesis of poly lactic acid using an alternative energy source through a continuous reactive extrusion process Dubey, S.P.; Abhyankar, H.A.; Marchante, V.; Brighton, J.L.; Blackburn, K.; Temple, C.; Bergmann, B.; Trinh, G.; David, C.	Journal Article full text
2016	Modelling of measurement data on the curing reaction of HTPB with isocyanate obtained by heat flow microcalorimetry and pressure decrease in closed vessel cells Bohn, Manfred A.; Seyidoglu, Tijen; Mußbach, Günter	Conference Paper full text
2016	Molecular dynamics simulation of cohesion within solid propellants Nardai, Michael M.; Bohn, Manfred A.	Conference Paper full text
2016	Multiaxiale Hochleistungs-Gewebekonstruktionen und deren belastungskonforme Nutzung zu Leichtbau-Composites mit unterschiedlichen Matrices: Schlussbericht zu dem IGF-Vorhaben 462 ZN Wendel, Rainer (Projektleiter); Bauder, Hans-Jürgen (Projektleiter)	Report full text
2016	Multiscale dispersion-state characterization of nanocomposites using optical coherence tomography Schneider, S.; Eppler, F.; Weber, M.; Olowojoba, G.; Weiss, P.; Hübner, C.; Mikonsaari, I.; Freude, W.; Koos, C.	Journal Article full text
2016	Nanometals: Synthesis and Application in Energetic Systems Gromov, A.A.; Korotkikh, A.G.; Il'in, A.; DeLuca, L.T.; Arkhipov, V.A.; Monogarov, K.A.; Teipel, U.	Book Article
2016	Neuartige Innenraumbeschichtung zur nachhaltigen Verbesserung der Raumluft und des Raumklimas Schmid, Helmut	Patent full text
2016	New energetic ingredients for solid rocket propulsion DeLuca, L.T.; Palmucci, I.; Franzin, A.; Weiser, V.; Gettwert, V.; Wingborg, N.; Sjoblom, M.	Journal Article full text
2016	Non-destructive ageing state determination of solid rocket motors charges Tussiwand, G.; Eineder, L.; Mussbach, G.; Bohn, M.A.	Conference Paper full text
2016	Novel low-cost selective pre-concentrators based on metal organic frameworks Wilhelm, I.; Rieger, M.; Hürttlen, J.; Wittek, M.; Alépée, C.; Leidinger, M.; Sauerwald, T.	Journal Article full text
2016	Numerical simulation of advanced pultrusion processes with microwave heating Barkanov, E.; Akishin, P.; Emmerich, R.; Graf, M.	Conference Paper
2016	Ökoeffizienz-Analyse zur Bewertung unterschiedlicher CFK-Recyclingtechnologien Dieterle, Michael; Seiler, Elisa (Betreuer); Viere, Tobias (Betreuer); Lang-Koetz, Claus (Zweitkorrektor)	Master Thesis
2016	On the design of a comb-shaped, poly(phenylene oxide)-based anodic binder for anion-exchange membrane direct methanol fuel cell (AEM-DMFC) Jurzinsky, T.; Bär, R.; Heppe, N.; Kübler, M.; Jung, F.; Cremers, C.; Tübke, J.	Conference Paper
2016	On the general water harvesting capability of metal-organic frameworks under well-defined climatic conditions Trapani, F.; Polyzoidis, Angelos; Löbbecke, Stefan; Piscopo, Calogero Giancarlo	Journal Article
2016	On the influence of Ag on Pd-based electrocatalyst for methanol oxidation in alkaline media: A comparative differential electrochemical mass spectrometry study Jurzinsky, T.; Cremers, C.; Pinkwart, K.; Tübke, J.	Journal Article
2016	On-board fuel tailoring with a novel catalytic evaporator for HCCI combustion Szolak, R.; Morales Wiemer, E.A.; Kraljevic, I.; Susdorf, A.; Karadeniz, H.; Epple, B.; Rümmele, F.; Schaadt, A.	Report
2016	One step to comparable off-plane permeability results - an improved measuring method for transverse permeability and compaction behavior of textile fiber materials Graupner, R.; Drechsler, K.	Conference Paper
2016	Online detection and categorisation of defects along carbon fibre production using a high resolution, high width line scan vision system Geinitz, S.; Wedel, A.; Margraf, A.	Conference Paper
2016	Optimization of PLA compounds using novel nucleating agents and plasticizers Moser, K.; Schmitt, M.; Holzer, A.; Bergmann, B.; Diemert, J.; Elsner, P.	Conference Paper
2016	Optimized profile extrusion processes for biopolymer blends Moser, K.; Holzer, A.; Bergmann, B.; Diemert, J.	Conference Paper
2016	Particle properties and crystal structure of ADN-prills Heintz, Thomas; Herrmann, Michael; Leisinger, Karlfred; Reinhard, Werner	Conference Paper full text
2016	PDF - Ein neuer Ansatz zur Strukturbestimmung energetischer Materialien Herrmann, Michael; Kempa, Paul-Bernd	Abstract full text
2016	Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 °C in pure steam environment Hovsepian, P.E.; Ehiasarian, A.P.; Purandare, Y.P.; Biswas, B.; Pérez, F.J.; Lasanta, M.I.; De Miguel, M.T.; Illana, A.; Juez-Lorenzo, M.; Muelas, R.; Agüero, A.	Journal Article
2016	Poly(Epichlorohydrin-CO-1,2-Epoxyhexane) - a promising precursor for an energetic azido polymer for cast-cure processing Hafner, Sven; Keicher, Thomas; Klapötke, Thomas M.	Conference Paper full text
2016	Polyurethanes based on 2,2-Dinitropropane-1,3-diol and 2,2-bis(azidomethyl)propane-1,3-diol as potential energetic binders Bellan, A.B.; Hafner, S.; Hartdegen, V.A.; Klapötke, T.M.	Journal Article
2016	Positive effect of the fluorine moiety on the oxygen storage capacity of UiO-66 metal-organic frameworks Piscopo, C.G.; Trapani, F.; Polyzoidis, A.; Schwarzer, M.; Pace, A.; Loebbecke, S.	Journal Article
2016	Potential Energetic Plasticizers on the Basis of 2,2-Dinitropropane-1,3-diol and 2,2-Bis(azidomethyl)propane-1,3-diol Hafner, S.; Hartdegen, V.A.; Hofmayer, M.S.; Klapötke, T.M.	Journal Article
2016	Preface Zarko, V.E.; Gromov, A.A.	Book Article
2016	Problematik der Übertragbarkeit bestehender Verfahren zur Kunststoff-Charakterisierung auf Kunststoffgemische Forberger, J.; Becker, R.W.	Journal Article
2016	Process and mold development of direct long fiber reinforced foam injection molding on the example of polycarbonate and glasfibers Lohr, C.; Menrath, A.; Elsner, P.; Weidenmann, K.A.	Conference Paper
2016	Process-parameter-dependent spring-in and warpage of locally reinforced ud tape laminates and V-shaped profiles Hangs, B.; Link, T.; Henning, F.	Conference Paper
2016	Proximal detection of traces of energetic materials with an eye-safe UV raman prototype developed for civil applications Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Murra, D.; Menicucci, I.; Angelini, F.; Palucci, A.	Journal Article full text
2016	Radiation-grafted materials for energy conversion and energy storage applications Nasef, M.M.; Gürsel, S.A.; Karabelli, D.; Güven, O.	Journal Article
2016	Recent advances and applications of external Cavity-QCLs towards hyperspectral imaging for standoff detection and real-time spectroscopic sensing of chemicals Ostendorf, R.; Butschek, L.; Hugger, S.; Fuchs, F.; Yang, Q.; Jarvis, J.; Schilling, C.; Rattunde, M.; Merten, A.; Grahmann, J.; Boskovic, D.; Tybussek, T.; Rieblinger, K.; Wagner, J.	Journal Article full text
2016	Recyclable epoxy system for HP-RTM application Pastine, S.; Meirson, G.; Swentek, I.; Nasrullah, M.; Kosinski, S.; Banatao, R.; Ugresic, V.; Henning, F.	Conference Paper
2016	Recycling von Textilien aus carbonfaserverstärkten Kunststoff-Bauteilen und deren Produktion Seiler, E.; Stark, A.; Forberger, J.	Journal Article
2016	Recyclinggerechte Produktentwicklung in der Luftfahrt am Beispiel Fluggastsitz Wimmer, Ann-Kathrin; Elsner, P.; Fröhling, M.; Eyerer, P.	Dissertation
2016	Scenario-based comparative assessment of potential future electricity systems - A new methodological approach using Germany in 2050 as an example Lunz, Benedikt; Stöcker, Philipp; Eckstein, Sascha; Nebel, Arjuna; Samadi, Sascha; Erlach, Berit; Fischedick, Manfred; Elsner, Peter; Sauer, Dirk Uwe	Journal Article
2016	Schnelle Prozesse - Mikrowellen in der Verfahrenstechnik Emmerich, Rudolf	Journal Article
2016	Sensitivity of material properties on wrinkling behavior and fiber reorientation of thermoplastic UD-Tape laminates during forming analyzed by Finite Element forming simulation Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Frank	Conference Paper
2016	Shrinking core model to describe metal particle oxidation from thermal analysis data Kelzenberg, S.; Eisenreich, N.; Knapp, S.; Weiser, V.	Journal Article
2016	Simulation of closed vessel combustion using the 2D ICT-Cellular-Combustion-Algorithm Wurster, S.; Fischer, T.S.	Conference Paper
2016	Simulation of double base propellant combustion using the ICT-cellular-combustion-algorithm Wurster, Sebastian	Conference Paper full text
2016	Stärkebasierte Textilien: Kostengünstige Textilien aus Biopolymeren Manvi, P.K.; Seide, G.; Gries, T.; Buczko, A.; Moser, K.	Journal Article
2016	Status on root cause investigation on airbag inflator failure mode Neutz, J.; Ebeling, H.; Yoshimura, K.	Journal Article
2016	Study of the long-term operation of a vanadium/oxygen fuel cell Noack, J.; Cognard, G.; Oral, M.; Küttinger, M.; Roznyatovskaya, N.; Pinkwart, K.; Tübke, J.	Journal Article
2016	Synthese und Charakterisierung von energetischen ionischen Liquiden auf Basis von 4-Amino-1,2,4-triazol Schaller, Uwe; Schlechtriem, Stefan; Elsner, Peter	Dissertation
2016	Techno-economic modeling and analysis of redox flow battery systems Noack, Jens; Wietschel, Lars; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens	Journal Article full text
2016	Temperature and spatially resolved investigations of the microstructure of gun propellants by means of x-ray diffraction Herrmann, Michael; Förter-Barth, Ulrich; Fietzek, Harald; Böhnlein-Mauß, Jutta; Kaiser, M.	Conference Paper full text
2016	Temperaturverhalten von Ammoniumdinitramid und Wechselwirkungen mit Additiven für Festtreibstoffe Herrmann, Michael; Kempa, Paul-Bernd; Förter-Barth, Ulrich; Heintz, Thomas	Abstract full text
2016	Test facility for investigation of impact-initiated bimetallic compounds Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas; Schuch, Michael	Conference Paper full text
2016	Thermogravimetric analysis of molybdenum oxide (MoO3) decomposition Knapp, Sebastian; Eisenreich, Norbert; Kuchenreuther-Hummel, Veronika; Kelzenberg, Stefan; Koleczko, Andreas; Schuppler, Heike	Conference Paper full text
2016	Towards an all-vanadium redox-flow battery electrolyte: electrooxidation of V(III) in V(IV)/V(III) redox couple Roznyatovskaya, N.; Noack, J.; Fühl, M.; Pinkwart, K.; Tübke, J.	Journal Article
2016	Die Tücke liegt im Detail - Ringversuch zum Thema Mischgasprüfung Lauff, Mareike; Cäsar, Joachim; Beier, Jochen	Conference Paper
2016	Turning trees into foam Schneider, A.; Rapp, F.; Iglhaut, K.; Michel, A.	Journal Article
2016	Überprüfung der Kalibrierung von Manganin-Stoßdrucksonden im Druckbereich von 150 bis 275 kbar Leibold, Marvin	Bachelor Thesis
2016	A unified kinetic model for adsorption and desorption - Applied to water on zeolite Gaulke, M.; Guschin, V.; Knapp, S.; Pappert, S.; Eckl, W.	Journal Article
2016	Untersuchungen zur Aminierung von Alkoholen mit einer DRIFTS-Zelle Rosemeier, Michael	Bachelor Thesis full text
2016	Using Thermogravimetric Analysis to Determine Carbon Fiber Weight Percentage of Fiber-Reinforced Plastics Bücheler, D.; Kaiser, A.; Henning, F.	Journal Article
2016	Utilization of recycled wood in biorefineries: Preliminary results of steam explosion and ethanol/water organosolv pulping without a catalyst Lesar, Bostjan; Humar, Miha; Hora, Guido; Hachmeister, Philipp; Schmiedl, Detlef; Pindel, Elvira; Siika-aho, Matti; Liitiä, Tiina	Journal Article
2016	Verfahren und Vorrichtung zur Herstellung von mit Einlegern versehenen Polymer-Formteilen Bücheler, David	Patent full text
2016	Verfahren zur Regeneration der Elektrolytlösung eines Redox-Flow-Akkumulators Noack, Jens; Fischer, Peter; Tübke, Jens; Pinkwart, Karsten	Patent full text
2016	Verfahren zur Versorgung eines elektische Energie umsetzenden Implantates mit elektrischer Energie Schmid, Helmut; Eckl, Wilhelm	Patent full text
2016	Von der Idee zur Innovation: Wegweiser zur Projektarbeit in Schülerlaboren und Schulen mit Partnern aus der Wirtschaft Apel, Stefan (Hrsg.); Haupt, Olaf J. (Hrsg.); Krause, Dörthe (Hrsg.); Parrisius, Martina (Hrsg.) ; TheoPrax Stiftung	Report
2016	Vorrichtung zur direkten und reversiblen Umwandlung thermischer Energie in elektrische Energie Schmid, Helmut; Koleczko, Andreas	Patent full text
2016	Vorrichtung zur Umwandlung der Energie elektromagnetischer Strahlung in elektrische Energie Schmid, Helmut; Walschburger, Erik; Mehring, Günter	Patent full text

This publication list has been generated from the publication database Fraunhofer-Publica.

Publications from 2015

Here you can find all publications made by Fraunhofer ICT in 2015.

Year	Title/Author	Document Type
2015	Aging of explosive crystals investigated by x-ray diffraction Herrmann, M.; Bohn M.A.	Conference Paper
2015	Aircraft Metals Recycling - Process, Challenges and Opportunities: Presentation held at Aerodays 2015, 7th European Aeronautics Days, 20.-23. October 2015, London Müller, Torsten	Presentation full text
2015	Alkaline direct alcohol fuel cells Cremers, C.; Jurzinsky, T.; Jung, F.; Pinkwart, K.; Tübke, J.	Conference Paper
2015	Analyse und Bewertung des Verzugs von lokal verstärkten Gelegelaminaten aus CP/PPS Link, Tobias; Hangs, Benjamin (Betreuer)	Master Thesis
2015	Analysis of pure tar substances (polycyclic aromatic hydeocarbons) in the gas stream using ultraviolet visible (UV-Vis) spectroscopy and multivariate cure resolution (MCR) Weide, Tobias; Guschin, Viktor; Becker, Wolfgang; Kölle, Sabine; Maier, Simon; Seidelt, Stephan	Journal Article
2015	Anion intercalation into graphite from a sodium-containing electrolyte Bordet, F.; Ahlbrecht, K.; Tübke, J.; Ufheil, J.; Hoes, T.; Oetken, M.; Holzapfel, M.	Journal Article
2015	Application of thermochemical sorption material to control the moisture of ammunition Guschin, Viktor; Knapp, Sebastian; Wehner, Harald; Hakspiel, Fabian; Pappert, Sandra; Eckl, Wilhelm	Conference Paper full text
2015	Assessment of description quality of models by information theoretical criteria based on Akaike and Schwarz-Bayes applied with stability data of energetic materials Bohn, Manfred A.	Conference Paper full text
2015	Aufschäumen von Hohlraumstrukturen für Strichschichten zur Reduzierung des spezifischen Gewichtes Stocker, T.; Eisenblätter, J.; Gericke, R.	Journal Article
2015	Battery Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas	Patent full text
2015	Characterization of a fuel cell stack for use in material handling applications Keller, S.; Cremers, C.; Niedergesäß, A.; Özel, T.	Conference Paper
2015	Characterization of butacene based composite propellants by loss factor curves determined with DMA Seyidoglu, Tijen; Bohn, Manfred A.	Conference Paper
2015	Characterization of complexly warped components made from locally reinforced UD-tape laminates Hangs, B.; Link, T.; Henning, F.	Abstract
2015	Characterization of sibex in 1,5m³ ICT detonation tank Materna, Miriam; Keßler, Armin	Conference Paper full text
2015	Charakterisierung von Metall-organischen Gerüststrukturen (MOF) mit Hilfe der Röntgenbeugung Herrmann, M.; Kempa, P.B.; Altenburg, T.; Polyzoidis, A.; Piscopo, C.G.; Löbbecke, S.	Conference Paper
2015	Die Chemie der Redox-Flow-Batterien Noack, Jens; Roznyatsovskaya, Nataliya; Herr, Tatjana; Fischer, Peter	Journal Article
2015	The Chemistry of Redox-Flow Batteries Noack, J.; Roznyatovskaya, N.; Herr, T.; Fischer, P.	Journal Article
2015	Cohesion properties in PBX and composite propellants - computational details Nardai, Michael M.; Bohn, Manfred A.	Conference Paper full text
2015	Cohesion properties in PBX and composite propellants - computational results and experimental aspects Nardai, Michael M.; Bohn, Manfred A.	Conference Paper full text
2015	Combustion Synthesis of AlN (Al3O3N), BN, ZrN, and TiN in Air and Ceramic Application Gromov, A.A.; Maggi, F.; Malikova, E.V.; Pautova, J.I.; Il'in, A.P.; Popenko, E.M.; Sergienko, A.V.; Korotkikh, A.G.; Teipel, U.	Book Article
2015	Crosslinking of poly(vinylene fluoride) separators by gamma-irradiation for electrochemical high power charge applications Karabelli, D.; Leprêtre, J.-C.; Dumas, L.; Rouif, S.; Portinha, D.; Fleury, E.; Sanchez, J.-Y.	Journal Article
2015	D 6-2 REMAGHIC Website: D 6-2 New Recovery Processes to produce Rare Earth - Magnesium Alloys of High Performance and Los Cost Rivas, Ana; Rodriguez, Pedro; Müller, Torsten	Report
2015	Damage behaviour of fibre reinforced materials induced by high temperature oxidation for optimisation of thermal recycling routes Manis, F.; Wölling, J.; Drechsler, K.	Conference Paper
2015	Deflagration-detonation experiments of sensitized mixtures of ammonium or urea nitrates and an energetic thermoplastic elastomer Quaresma, J.; Keicher, Thomas; Pineiro, M.; Deimling, Lukas; Campos, Jose; Krause, Horst	Conference Paper full text
2015	Detection and modelling of thermal and rheological transitions of a 2-step-curing thermoset using dielectric and standard measuring techniques Chaloupka, A.; Bezerra, R.; Madaksira, V.; Taha, I.; Rudolph, N.M.	Conference Paper full text
2015	Development of a novel experimental DEMS set-up for electrocatalyst characterization under working conditions of high temperature polymer electrolyte fuel cells Niether, C.; Rau, M.S.; Cremers, C.; Jones, D.J.; Pinkwart, K.; Tübke, J.	Journal Article
2015	Development of a pure oxygen fuel cell system for an autonomous underwater vehicle with focus on fuel starvation due to inert gas accumulation on the anode Hitscherich, M.; Cremers, C.; Stolten, D.; Pinkwart, K.; Tübke, J.	Conference Paper
2015	Development of an innovative heat storage system for combined heat and power plants (CHP): Poster abstract Merkel, S.; Epple, Boris; Simsek, A.; Kollmeier, H.P.; Eckl, W.; Pappert, Sandra; Elsner, Peter	Abstract full text
2015	Development of anodic materials for HT-PEMFCs with high tolerance to H2S Rau, M.; Cremers, C.; Tübke, J.	Journal Article
2015	Development of materials for anion-exchange membrane direct alcohol fuel cells Jurzinsky, T.; Cremers, C.; Jung, F.; Pinkwart, K.; Tübke, J.	Journal Article
2015	Direct generation of titanium dioxide nanoparticles dispersion under supercritical conditions for photocatalytic active thermoplastic surfaces for microbiological inactivation Zydziak, Nicolas; Ambrosio Zanin, Maria-Helena; Trick, Iris; Hübner, Christof	Journal Article
2015	Dithionite/air direct ion liquid fuel cell Noack, J.; Tübke, J.; Pinkwart, K.	Journal Article
2015	Dose response relations of PP Reichert, Thomas; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Schönlein, Artur; Geburtig, A.; Zäh, Matthias	Conference Paper
2015	Effect of curing agents and plasticizers on the loss factor curves of HTPB-binders quantified by modelling Seyidoglu, Tijen; Bohn, Manfred A.	Conference Paper
2015	The effect of plasticizers on the glass-to-rubber behavior of Desmophen® 2200 based elastomers used for composite propellants Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.	Conference Paper full text
2015	Effect of surface treatment for metallic z-reinforcements on interlaminar fracture toughness of CFRP/CFRP joints Jürgens, M.; Kurtovic, A.; Mertens, T.; Nogueira, A.C.; Lang, H.; Kolb, M.; Strobach, P.; Hombergsmeier, E.; Drechsler, K.	Conference Paper
2015	Effects of radiation on the flame front of hydrogen air explosions: Paper presented at 6h International Conference on Hydrogen Safety, Yokohama, 19-21 October 2015 Keßler, Armin; Wassmer, Conrad; Knapp, Sebastian; Weiser, Volker; Sachsenheimer, K.; Raab, Angelika; Langer, Gesa; Eisenreich, Norbert	Presentation full text
2015	Electrical buffer storage for energy harvesting Hahn, R.; Möller, K.-C.	Book Article
2015	Electrocatalyst for direct alcohol fuel cells Cremers, Carsten; Jurzinsky, Tilman; Bach Delpeuch, A.; Niether, C.; Jung, Florina; Pinkwart, Karsten; Tübke, Jens	Conference Paper
2015	Energetic materials - performance, safety and system applications: 46th International Annual Conference of the Fraunhofer ICT, June 23 - 26, 2015, Karlsruhe, Germany Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Conference Proceedings
2015	Evaluation of the effect of plasticizers on the DMA loss factor, the thermal and mechanical properties of Desmophen® 2200 based elastomers used for composite propellants Lemos, Mauricio Ferrapontoff; Bohn, Manfred A.	Conference Paper
2015	EXPEDIA - a new EU project aiming to reduce threats from homemade explosives Keicher, Thomas; Hafner, Sven; Krause, Horst; Östmark, Henric; Kölhed, Malin; Krumlinde, Patrik	Conference Paper
2015	Experimental and theoretical comparison of a systematic variety of thermite compositions Weiser, Volker; Roth, Evelin; Kelzenberg, Stefan; Becker, Wolfgang; Sachsenheimer, K.	Conference Paper full text
2015	Experimental determination of heat-dynamics of a zeolite bedding Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm	Abstract full text
2015	Experimental determination of heat-dynamics of a zeolite bedding in a plug flow reactor Hakspiel, Fabian; Pappert, Sandra; Teipel, Ulrich; Eckl, Wilhelm	Abstract
2015	Experimentelle Charakterisierung des Einflusses verschiedener Bindersysteme auf die Permeabilität des Preforms bei der RTM-Fertigung Magagnato, D.; Thoma, B.; Henning, F.	Journal Article
2015	Fraunhofer-Institut für Chemische Technologie. Jahresbericht 2014/2015 Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Annual Report full text
2015	FRP parts for internal combustion engines Berg, L.-F.	Journal Article
2015	Fuel cells as range extender or auxiliary power unit for electric vehicles Cremers, C.; Hitscherich, M.; Ries, P.; Niedergesäß, A.; Rau, M.S.; Pinkwart, K.; Tübke, J.	Conference Paper
2015	Germany gets on Eco Design for aircraft end-of-life strategy Wimmer, A.-K.	Conference Paper
2015	Gewebe mit Polymerschicht Schmid, Helmut; Eisenreich, Norbert; Homa, Peter	Patent full text
2015	Herstellung von Aminen aus Alkoholen mittels heterogener Katalysatoren Späth, Sarah; Kowollik, K. (Betreuer); Flick, K. (Betreuer)	Master Thesis
2015	High energy density amorphous silicon anodes for lithium ion batteries deposited by DC sputtering Farmakis, F.; Elmasides, C.; Fanz, P.; Hagen, M.; Georgoulas, N.	Journal Article
2015	High-pressure resin injection - Key technology for large-scale production Graf, M.; Chaudhari, R.	Conference Paper
2015	High-temperature polymer electrolyte membrane based direct ethanol fuel cell Cremers, C.; Niether, C.; Delpeuch, A.B.; Ries, P.; Jung, F.; Pinkwart, K.; Tübke, J.	Conference Paper
2015	Highly active carbon supported palladium-rhodium PdXRh/C catalysts for methanol electrooxidation in alkaline media and their performance in anion exchange direct methanol fuel cells (AEM-DMFCs) Jurzinsky, Tilman; Bär, R.; Cremers, Carsten; Tübke, Jens; Elsner, Peter	Journal Article
2015	An holistic evaluation of the state of the art and future developments on non-lethal microwave systems Valente, F.; Paulissen, P.; Neutz, J.; Urban, H.; Roland-Price, A.	Conference Paper
2015	Hot-Spot modelling of propellant regression. Part 2 Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker	Conference Paper full text
2015	Hot-spot modelling of thermite mixtures Knapp, Sebastian; Weiser, V.; Kelzenberg, S.; Roth, E.; Eckl, W.	Conference Paper
2015	Hyperspectral imaging of pyrotechnical decoys Schreiber, Achim; Klahn, Thorsten; Zilly, Andreas; Deimling, Lukas	Conference Paper full text
2015	Impact of HP-RTM process parameters on mechanical properties using epoxy and polyurethane Swentek, I.; Beck, B.; Ugresic, V.; Potyra, T.; Henning, F.	Conference Paper
2015	Improvement of polymer films in terms of barrier properties using nanotechnology Schmid, Helmut	Conference Paper
2015	The influence of different nitrocelluloses on the interaction in a binder-plasticizer system Mitró, Daniel; Böhnlein-Mauß, Jutta	Conference Paper full text
2015	Influence of different plasticizers on the glass transition temperature of mixtures with energetic thermoplastic elastomers Böhnlein-Mauß, Jutta; Mitró, Daniel; Helfrich, Mathias	Conference Paper full text
2015	Influence of H- and OH-adsorbates on the ethanol oxidation reaction: A DEMS study Delpeuch, A.B.; Chatenet, M.; Rau, M.S.; Cremers, C.	Journal Article
2015	Influence of surface treatment and design of 3D-reinforcements on delamination resistance & mechanical properties of CFRP/CFRP joints under static & fatigue loading Juergens, M.; Kurtovic, A.; Mertens, T.; Kolb, M.; Greitemeier, D.; Lang, H.; Hombergsmeier, E.; Drechsler, K.	Conference Paper full text
2015	Influence of the temperature for the ethanol oxidation reaction (EOR) on Pt/C, Pt-Rh/C and Pt-Rh-SnO2/C Delpeuch, A.B.; Asset, T.; Chatenet, M.; Cremers, C.	Journal Article
2015	Inhibitors for non-lethal anti-material applications Armbrust, Torsten; Rozincsak, Linda; Klemenz, Melanie; Hummel, Marc; Bernewitz, Johanna; Neutz, Jochen	Conference Paper full text
2015	Insensitive, high-performance explosives Herrmann, M.	Journal Article
2015	Interaction energies between binder polymers and crystalline surfaces in composite materials determined by solution microcalorimetry and computer simulation Nardai, Michael M.; Bohn, Manfred A.	Abstract
2015	Investigation of rotating pyrotechnical decoy in realistic air flow with authentic ignition Deimling, Lukas; Billeb, G.; Klahn, Thorsten; Schreiber, Achim; Zilly, Andreas	Conference Paper full text
2015	Investigations on injection molded, glass-fiber reinforced polyamide 6 integral foams using breathing mold technology Roch, A.; Kehret, L.; Huber, T.; Henning, F.; Elsner, P.	Conference Paper
2015	IP-Schutzart IPX9 / IPX9K Rühle, Steffen; Cäsar, Joachim	Conference Paper
2015	Kombination von turbidimetrischer Methode mit Verfahren der 369 multivariaten Datenanalyse zur Charakterisierung von Nanokompositen Guschin, V.; Becker, W.; Mikonsaari, I.; Weiss, P.; Günthner, C.; Eickershoff, B.; Kölle, S.; Maier, S.; Llorens-Chiralt, R.	Conference Paper
2015	Lithium-sulfur cells: The Gap between the state-of-the-art and the requirements for high energy battery cells Hagen, Markus; Hanselmann, Dominik; Ahlbrecht, Katharina; Maça, Rudi; Gerber, D.; Tübke, Jens	Journal Article full text
2015	Localisation of IED manufacturing facilities by detection of explosives in sewage water Schnürer, Frank; Heil, Moritz; Rieger, Max; Eberhardt, Angelika; Aniol, Jasmin; Krause, Horst	Conference Paper
2015	Low temperature, high energy density non-aqueous Redox Flow Battery Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P.	Conference Paper
2015	Machbarkeitsstudie zur Materialsubsitution von Stahl und Aluminium durch Sheet Moulding Compound (SMC) am Beispiel eines Automobilkarosseriebauteils List, Jonas; Henning, Frank; Keckl, Christoph (Projektleiter)	Master Thesis
2015	MAI ENVIRO. Vorstudie zur Lebenszyklusanalyse mit ökobilanzieller Bewertung relevanter Fertigungsprozessketten für CFK-Strukturen Hohmann, Andrea; Schwab, Bernhard; Wehner, Daniel; Albrecht, Stefan; Ilg, Robert; Schüppel, Denny; Reden, Tjark von	Study full text
2015	Manufacturing of complex shape composite parts through the combination of pull-braiding and blow moulding Bezerra, R.; Wilhelm, F.; Strauß, S.; Ahlborn, H.	Conference Paper full text
2015	Metal organic frameworks as selective preconcentrator material for gas-phase sensing Rieger, Max; Heil, Moritz; Hürttlen, Jürgen; Schnürer, Frank; Bunte, Gudrun; Krause, Horst	Conference Paper
2015	Metal Organic Frameworks (MOFs): Time for a breakthrough in material supply: Advantages and perspectives of MOF synthesis in flow Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.; Piscopo, C.G.	Journal Article
2015	Methodische Umsetzung und Bewertung eines neuartigen Prozesses zur lokalen und automatisierten Fixierung von textilen Preformlingen Thoma, Bernd	Dissertation full text
2015	Microstructure of energetic thermoplastic elastomers investigated by means of x-ray diffraction Herrmann, Michael; Förter-Barth, Ulrich; Keicher, Thomas	Conference Paper full text
2015	Microstructure of the HMX-Based PBX KS32 after Mechanical Loading Herrmann, Michael; Förter-Barth, Ulrich; Bohn, Manfred A.; Krause, Horst; Koch, Michael; Werner, Arnold	Journal Article
2015	Model-based development of a holistic thermal management system for an electric car with a high temperature fuel cell range extender Fischer, Torben; Götz, Florian; Berg, Lars Fredrik; Kollmeier, Hans-Peter; Gauterin, Frank	Conference Paper full text
2015	Modelling of loss factor curves obtained by Torsion-DMA of HTPB and GAP based binders manufactured with different curing agents and plasticizers Seyidoglu, Tijen; Bohn, Manfred A.	Conference Paper full text
2015	Modelling of loss factors of elastomer binders of high explosive charges and composite rocket propellants to separate binder fractions with different molecular mobility used to follow ageing Bohn, Manfred A.	Conference Paper
2015	Molding tools without sealing gaskets: New sealing concept optimizes resin injection technology Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank	Journal Article full text
2015	Monitoring of bond-line stresses in case-bonded composite rocket propellants Mußbach, Günter; Bohn, Manfred A.	Conference Paper
2015	Multi-modal dense sphere packing algorithm for the simulation of thermites Günthner, Christian; Knapp, Sebastian; Weiser, Volker	Conference Paper full text
2015	Nanoporöse Multitalente Polyzoidis, Angelos; Piscopo, Calogero Giancarlo; Löbbecke, Stefan	Journal Article full text
2015	Nanosilber-Systemtechnologie zur Vermeidung mikrobieller Materialzerstörung Schmid, Helmut	Conference Paper
2015	Near infrared spectroscopy as a tool for in-line control of process and material properties of PLA biopolymer Becker, Wolfgang; Inone-Kauffmann, Emilia R.; Eckl, Wilhelm; Eisenreich, Norbert	Journal Article full text
2015	Neue Elektrolyte zur Steigerung der Energiedichte einer nicht-wässrigen Vanadium-Acetylacetonat-Redox-Flow-Batterie Herr, Tatjana	Dissertation full text
2015	New approaches to the CL-20/HMX cocrystal a less sensitive high power explosive Herrmannsdörfer, Dirk; Herrmann, Michael; Heintz, Thomas	Conference Paper full text
2015	A new eye-safe UV Raman spectrometer for the remote detection of energetic materials in fingerprint concentrations: Characterization by PCA and ROC analyzes Almaviva, S.; Chirico, R.; Nuvoli, M.; Palucci, A.; Schnurer, F.; Schweikert, W.	Journal Article
2015	A new mixing technology for plastic bonded explosives Gerber, Peter; Happ, Andreas	Conference Paper full text
2015	Non-destructive method to follow ageing of solid propellant in rocket motors Mußbach, Günter; Bohn, Manfred A.	Conference Paper full text
2015	A novel low-cost pre-concentrator concept to boost sensitivity and selectivity of gas sensor systems Schütze, A.; Leidinger, M.; Schmitt, B.; Sauerwald, T.; Rieger, M.; Alepee, C.	Conference Paper
2015	Novel theoretical and computer-assisted modeling of isothermal and non-isothermal depolymerization kinetics Bigger, S.W.; Cran, M.J.; Bohn, M.A.	Journal Article
2015	On the mechanism of zirconium nitride formation by zirconium, zirconia and yttria burning in air Malikova, E.; Pautova, J.; Gromov, A.; Monogarov, K.; Larionov, K.; Teipel, U.	Journal Article
2015	Pair distribution function analysis of ammonium nitrate - evaluation of measuring systems for energetic materials Kempa, Paul-Bernd; Herrmann, Michael	Conference Paper full text
2015	Parameterstudie zur thermochemischen Zersetzung organischer Materialien in geschmolzenen Salzen Nieberl, Martin	Bachelor Thesis full text
2015	Phase change detection in neat and fiber reinforced polyamide 6 using dielectric analysis Chaloupka, A.; Wedel, A.; Taha, I.; Rudolph, N.; Drechsler, K.	Conference Paper
2015	Polypropylene numerical photoageing simulation by dose - response functions with respect to irradiation and temperature: ViPQuali project Geburtig, A.; Wachtendorf, Volker; Trubiroha, Peter; Zäh, Matthias; Schönlein, Artur; Müller, Axel; Vatahska, Teodora; Manier, Gerhard; Reichert, Thomas	Book Article
2015	Polyurethanes with components made of renewable resources and recyclates: Paper presented at UTECH Europe 2015, The Leading International Exhibition & Conference for the Global Polyurethanes Industry, 14-16 April 2015, Maastrich, Niederlande Anders, T.	Presentation full text
2015	Post-Lithium-Ionen-Batterien Tübke, J.; Hagen, M.	Book Article
2015	Preparation and characterization of foamed propellants using supercritical fluids Kröber, Hartmut; Böhnlein-Mauß, Jutta	Conference Paper full text
2015	Presswerkzeuge ohne Dichtung: Neues Dichtkonzept optimiert Harzinjektionstechnik Fürst, Tobias; Huber, Timo; Kuppinger, Jan; Henning, Frank	Journal Article full text
2015	ProCycle. Analyse und toxikologische Bewertung von Stäuben aus Recycling- und Verwertungsprozessen von Nanocomposites und Strategien zur Gefährdungsminimierung: Vortrag gehalten auf dem NanoCare Clustermeeting, 20. Mai 2015, Dechema, Frankfurt Guschin, Viktor; Marioth, Eric	Presentation full text
2015	Produktgestaltung in der Partikeltechnologie. Bd.7: 7. Symposium "Produktgestaltung in der Partikeltechnologie", 23. und 24. April 2015, Berlin Teipel, Ulrich ; Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Conference Proceedings
2015	Propellants Gettwert, V.; Bohn, M.A.; Schubert, H.	Book Article
2015	Protecting the structural integrity of composites in fire: Intumescent coatings in the intermediate scale Hörold, A.; Schartel, B.; Trappe, V.; Gettwert, V.; Korzen, M.	Journal Article
2015	Pyroorganic flares - state of the art and progress Weiser, Volker; Roth, Evelin; Raab, Angelika; Knapp, Sebastian; Kelzenberg, Stefan; Eckl, Wilhelm	Conference Paper
2015	Rankine cycle for hybrid vehicles: The potential for CO2 emissions reduction Kraljevic, I.; Kollmeier, H.-P.; Spicher, U.	Conference Paper
2015	Recomat-spectrometric application Klahn, Thorsten; Zilly, Andreas; Schreiber, Achim; Deimling, Lukas	Conference Paper full text
2015	Results from miniaturized directed acoustic arrays Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Walschburger, Erik; Eisenreich, Norbert	Conference Paper full text
2015	Review of some peculiarities of the stability and decomposition of HNF and ADN Bohn, Manfred A.	Conference Paper
2015	Review of some peculiarities of the stability and decomposition of HNF and ADN Bohn, Manfred A.	Conference Paper
2015	Review on ICT's research on scalable non-lethal launchers and projectiles Armbrust, Torsten; Krebs, Heinrich; Neutz, Jochen; Scholz, Peter; Thiel, Klaus-Dieter; Zettl, Sebastian	Conference Paper full text
2015	Scale-up approaches for the ADN-prilling process by emulsion crystallization Heintz, T.; Leisinger, K.; Roßmann, C.	Conference Paper
2015	Schaum aus dem Gelben Sack: Expandierte Polyolefine aus Sekundärrohstoffen herstellen Schneider, Anja; Mack, Christoph; Rapp, Florian	Journal Article full text
2015	Screening of natural lightweight fillers for sheet moulding compound in North America Pierce, A.; Potyra, T.; Henning, F.	Conference Paper
2015	Self-propagating combustion synthesis of nanostructured particles Imiolek, Andreas; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Lity, André	Conference Paper full text
2015	Sieving effects in electrical double-layer capacitors based on neat [Al(hfip)(4)](-) and [NTf2](-) ionic liquids Roznyatovskaya, N.; Rupp, A.B.A.; Tübke, J.; Krossing, I.	Journal Article
2015	Simulation and experimental validation of gaps and bridging in the automated fiber placement process Lichtinger, R.; Lacalle, J.; Hinterhölzl, R.; Beier, U.; Drechsler, K.	Journal Article
2015	Small scale motor tests of ADN/GAP based propellants Gettwert, Volker; Fischer, Sebastian	Conference Paper full text
2015	Stability and characterization of GAP bonded ADN-propellant - the problem of gas formation during curing with isocyanates and characteristics of the glass-rubber transition Bohn, Manfred A.; Gettwert, Volker	Conference Paper full text
2015	Stability of UiO-66 under acidic treatment: Opportunities and limitations for post-synthetic modifications Piscopo, C.G.; Polyzoidis, A.; Schwarzer, M.; Loebbecke, S.	Journal Article
2015	Stand und Perspektiven von Redox-Flow-Batterien als stationäre Speicherlösungen Tübke, J.; Noack, J.; Wietschel, L.	Journal Article full text
2015	Supported sulfonic acids: Solid catalysts for batch and continuous-flow synthetic processes Piscopo, C.G.	Journal Article
2015	Synergists for Hexaphenoxycyclotriphosphazene in Cast PA6: Poster presented at FRPM 2015, 15th European Meeting on Fire Retardancy and Protection of Materials, 22-25 June 2015, Berlin Höhne, Carl-Christoph; Käbisch, Bert; Anders, Thorsten; Kroke, Edwin	Poster full text
2015	Synthesis and characterization of nitrate based energetic ionic liquids (EILs) Schaller, Uwe; Keicher, Thomas; Weiser, Volker; Krause, Horst	Conference Paper full text
2015	Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from gasphase Bunte, Gudrun; Hürttlen, Jürgen; Heil, Moritz; Rieger, Max; Krause, Horst	Conference Paper
2015	Systematische Untersuchung thermischer Prozesse für das Recycling von kohlenstofffaserverstärkten Kunststoffen Benka, Christopher; Manis, Frank (Betreuer)	Bachelor Thesis full text
2015	Thermodynamic derivation of open circuit voltage in vanadium redox flow batteries Pavelka, M.; Wandschneider, F.; Mazur, P.	Journal Article
2015	Thermogravimetric study on the reaction of magnesium and aluminum in nitrogen Kuchenreuther-Hummel, V.; Rozincsak, Linda; Neutz, Jochen	Conference Paper full text
2015	Thermoplastic composites in structural lightweight applications: Potential of unidirectional fiber reinforcement and sandwich structures Huber, T.; Henning, F.; Menrath, A.; Heinzle, V.	Conference Paper
2015	Trace gas VOC detection using metal-organic frameworks as pre-concentrators and semiconductor gas sensors Leidinger, M.; Rieger, M.; Weishaupt, D.; Sauerwald, T.; Nägele, M.; Hürttlen, J.; Schütze, A.	Journal Article full text
2015	Über 300.000 Kilometer unter Strom: Physikalisch-technische, ökonomische, ökologische und sozialwissenschaftliche Begleitforschung des Schaufensterprojektes RheinMobil: Grenzüberschreitende, perspektivisch wirtschaftliche elektrische Pendler- und Dienstwagenverkehre im deutsch-französischen Kontext Stella, Kevin; Wollersheim, Olaf; Fichtner, Wolf; Jochem, Patrick; Schücking, Maximilian; Nastold, Max; Ensslen, Axel; Wietschel, Martin; Held, Michael; Gnann, Till; Friedmann, Michael; Graf, Roberta; Wohlfarth, Katharina	Report full text
2015	Untersuchungen an a-C:H:Me beschichteten Substraten zur Eignung als alternatives Bipolarplattenmaterial für wässrige Vanadium Redox-Flow Batterien Richards, Justin	Dissertation full text
2015	A vanadium redox flow battery for uninterruptible power supply applications Buczkowski, T.; Noack, J.; Fischer, P.; Tübke, J.; Pinkwart, K.	Conference Paper
2015	Verbundvorhaben: Bioschaumplatten - Extrusionsgeschäumte, dickwandige Plattenelemente aus einem biobasierten, thermoplastischen Kunststoff Wodke, Thomas; Rapp, Florian; Basler, Aaron; Maga, Daniel; Erdmann, Rafael	Report full text
2015	Verfahren zur Gewinnung von aromatischen Verbindungen Forstner, Jochen; Unser, Steffen; Schweppe, Rainer	Patent full text
2015	Verfahren zur Herstellung thermoplastischer Verbundbauteile Wendel, Rainer; Arik, Cahit; Henning, Frank	Patent full text
2015	Verfahren zur Herstellung von Propen aus Propanol Forstner, Jochen; Unser, Steffen; Böringer, Sarah	Patent full text
2015	Verfahren zur Konsolidierung von thermoplastitschen oder thermoelastischen Faserverbundstrukturen Baumgärtner, Sebastian; Heinzle, Volker; Lohr, Christoph; Henning, Frank; Rampf, Wolf-Georg	Patent full text
2015	Verfahren zur Rückgewinnung von Wärme aus Verbrennungsmotoren sowie zur Umwandlung der rückgewonnenen Wärme in mechanische Energie Kollmeier, Hans-Peter; Kraljevic, Ivica; Rohrpasser, Christian; Striebich, Helmut	Patent full text
2015	Verkürzung von Prozessketten am Beispiel des Direkt-SMC-Prozesses Keckl, C.	Conference Paper
2015	Wetting of oxidizer particles by binder and plasticizer molecules - microcalorimetry experiments and computer simulations Nardai, Michael M.; Bohn, Manfred A.	Conference Paper
2015	Widely tuneable quantum cascade lasers for spectroscopic sensing Wagner, J.; Ostendorf, R.; Grahmann, Jan; Merten, André; Hugger, S.; Jarvis, J.P.; Fuchs, F.; Boskovic, D.; Schenk, Harald	Conference Paper
2015	X-Bond - Entkleben unter Nutzung exothermer Reaktionen Winkel, A.; Kahlmeyer, M.; Böhm, S.; Sims, S.; Gettwert, V.; Urban, H.	Conference Paper

This publication list has been generated from the publication database Fraunhofer-Publica.

Publications from 2014

Here you can find all publications made by Fraunhofer ICT in 2014.

Year	Title/Author	Document Type
2014	3. Symposium Rohstoffeffizienz und Rohstoffinnovationen 2014: 5. und 6. Februar 2014, Neues Museum Nürnberg Teipel, Ulrich; Reller, Armin ; Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal; Georg-Simon-Ohm-Hochschule, Nürnberg; Univ. Augsburg	Conference Proceedings
2014	3D tomographic characterization of sandwich structures Dietrich, Stefan; Weidenmann, Kay; Elsner, Peter	Journal Article
2014	Activation energies for the decomposition of nitrate ester groups at the anhydroglucopyranose ring positions C2, C3 and C6 of nitrocellulose using the nitration of a dye as probe Moniruzzaman, Mohammed; Bellerby, John M.; Bohn, Manfred A.	Journal Article
2014	Aging of ADN rocket propellant formulations with desmophen®-based elastomer binder Cerri, S.; Bohn, M.A.; Menke, K.; Galfetti, L.	Journal Article
2014	Alt-Handy-Recycling - Eine neue Rohstoffquelle Teipel, U.; Wolf, S.; Köpnick, H.; Bischlager, O.; Daehn, C.	Conference Paper
2014	Aluminum nanoparticles application to energetic systems - new horizons or sunset? Gromov, Alexander; Teipel, Ulrich; Luca, L. de	Conference Paper
2014	Application of micro-Raman spectroscopy for fight against terrorism and smuggling Almaviva, S.; Botti, S.; Palucci, A.; Puiu, A.; Schnürer, F.; Schweikert, W.; Romolo, F.S.	Journal Article
2014	Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M.	Conference Paper
2014	Atomistic simulation of the temperature dependence of density and van-der-Waals interactions of binders, plasticizers and mixtures of them Bohn, Manfred A.; Evangelisti, Camilla; Klapötke, Thomas M.	Conference Paper
2014	Aufbereitung nachwachsender Rohstoffe durch Zerkleinerung: Abstract zum Poster Eisenlauer, M.; Teipel, U.	Abstract
2014	Aufbereitung von sekundären mineralischen Baustoffen Teipel, U.	Journal Article
2014	Benetzungsverhalten von Kohlenstoff-Nanoröhren Dresel, A.; Teipel, U.	Journal Article
2014	Benetzungsverhalten von Kohlenstoffnanoröhren Dresel, A.; Teipel, U.	Journal Article
2014	Benetzungsverhalten von mineralischen Sekundärrohstoffen Hennig, M.; Teipel, U.	Conference Paper
2014	Biopolymer foams - relationship between material characteristics and foaming behavior of cellulose based foams Rapp, F.; Schneider, A.; Elsner, P.	Conference Paper
2014	Bodengranulat zur reversiblen Speicherung von Wasser und Verfahren zu dessen Herstellung Schmid, Helmut; Narayana, Ida-Bagus Kesawa; Braun, Monika	Patent full text
2014	Brennkraftmaschine und Verfahren zu ihrem Betrieb Schwaibold, Steffen; Fischer, Michael; Kraljevic, Ivica	Patent full text
2014	Burning behaviour of aluminium and its hydride in an ADN/GAP-matrix Franzin, Andrea; Weiser, Volker; Gettwert, Volker; Luca, L. de; Roth, Evelin; Kelzenberg, Stefan; Poth, H.; Bieroth, D.	Conference Paper
2014	Burning behaviour of B/KDN-mixtures compared with B/KNO3 Weiser, Volker; Lity, André; Kelzenberg, Stefan; Koleczko, Andreas; Roth, Evelin; Schaller, Uwe; Walschburger, Erik	Conference Paper
2014	Cell energy density and electrolyte/sulfur ratio in Li-S cells Hagen, M.; Fanz, P.; Tübke, J.	Journal Article
2014	Chain alignment for improved properties - optimization of PLA and PHB-V by crystallization and reinforcement Moser, K.; Bergmann, B.; Diemert, J.; Elsner, P.	Conference Paper
2014	Characterisation of enhanced blast formulations with different methods Gerber, Peter; Aurich, Hagen; Happ, Andreas; Sättler, Axel	Conference Paper
2014	Characterization of ADN/GAP-based and ADN/desmophen-based propellant formulations and comparison with AP analogues Cerri, Sara; Bohn, Manfred A.; Menke, Klaus; Galfetti, Luciano	Journal Article
2014	Characterization of high-pressure resin transfer molding process variants for manufacturing high-performance composites Chaudhari, Raman	Dissertation full text
2014	Charakterisierung von Bariumstrontiumtitanat-Partikeln mithilfe der Röntgenbeugung Herrmann, Michael; Förter-Barth, Ulrich; Roßmann, Christian; Teipel, Ulrich	Journal Article full text
2014	Combustion Features of ADN-Based Solid Rocket Propellants for Space Applications Luca, L.T. de; Palmucci, I.; Franzin, A.; Trache, D.; Pang, W.-Q.; Weiser, V.	Conference Paper
2014	Comparison of experimental and theoretical pair distribution functions of ammonium nitrate Kempa, Paul-Bernd; Herrmann, Michael	Conference Paper
2014	Compressibility and permeability of fiber reinforcements for pultrusion Bezerra, R.; Wilhelm, F.; Henning, F.	Conference Paper full text
2014	Conductive polymer composites and coated metals as alternative bipolar plate materials for all-vanadium redox-flow batteries Caglar, B.; Richards, J.; Fischer, P.; Tuebke, J.	Journal Article
2014	Continuous supercritical hydrothermal synthesis of iron oxide nanoparticle dispersions and their characterization Daschner de Tercero, M.; Röder, C.; Fehrenbacher, U.; Teipel, U.; Türk, M.	Journal Article
2014	A coupled-physics model for the vanadium oxygen fuel cell Wandschneider, F.T.; Küttinger, M.; Noack, J.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H.	Journal Article
2014	Deflagration And Detonation Of Mixtures Of Ammonium Or Urea Nitrates With An Energetic Thermoplastic Elastomer Quaresma, J.; Pineiro, M.; Campos, J.; Keicher, T.; Krause, H.	Conference Paper
2014	Detonation measurements using single optical fibers Campos, Jose; Mendes, R.; Quaresma, J.; Anastacio, A.; Keicher, Thomas; Deimling, Lukas; Krause, Horst	Conference Paper
2014	Development and characterization of a 280 cm2 vanadium/oxygen fuel cell Noack, J.; Cremers, C.; Bayer, D.; Tübke, J.; Pinkwart, K.	Journal Article
2014	The development of a modular synthesis of teraryl-based alpha-helix mimetics as potential inhibitors of protein-protein interactions Trobe, M.; Peters, M.; Grimm, S.H.; Breinbauer, R.	Journal Article
2014	Development of anodic materials with elevated hydrogen sulfide tolerance for HT-PEMFCs using reformat Rau, M.S.; Cremers, C.; Pinkwart, K.; Tübke, J.	Conference Paper
2014	Development of carbon nanotube and graphite filled polyphenylene sulfide based bipolar plates for all-vanadium redox flow batteries Caglar, B.; Fischer, P.; Kauranen, P.; Karttunen, M.; Elsner, P.	Journal Article
2014	Development of graphite and carbon nanotube filled thermoplastic based bipolar plates for all-vanadium redox flow batteries Caglar, Burak	Dissertation full text
2014	Druckfiltration von Kohlenstoffnanoröhren-Suspensionen Dresel, A.; Teipel, U.	Journal Article
2014	Eine dufte Technik Just, D.; Diemert, J.	Journal Article
2014	Dynamisch-physikalische Modellierung von Siebklassierprozessen Hennig, M.; Elskamp, F.; Kruggel-Emden, H.; Teipel, U.	Journal Article
2014	Dynamische Modellierung von Siebklassierprozessen: Abstract zum Poster Hennig, M.; Teipel, U.	Abstract
2014	Effect of boron addition on micro-aluminum-particle-based multifunctional high-temperature coatings Roussel Garcia, Raquel; Kolarik, Vladislav; Juez-Lorenzo, Maria; Fietzek, Harald	Journal Article full text
2014	Effect of mobile phone radiation on the human body and textile remedies Roy, T.; Govekar, A.; Rajpurohit, A.	Journal Article
2014	Effiziente Recyclingverfahren für Altbatterien Kross, S.; Teipel, U.; Würfel, K.	Journal Article
2014	Effizientes Rohstoffrecycling? Beurteilung von Verfahrenstechnologien zur Verwertung von Lithiumbatterien und -akkumulatoren Würfel, K.; Kross, S.; Teipel, U.	Conference Paper
2014	Einfluss lokaler Endlosfaserverstärkungen auf das Eigenschaftsprofil struktureller Spritzgießbauteile Huber, Timo	Dissertation full text
2014	Electrooxidation of ethanol at room temperature on carbon-supported Pt and Rh-containing catalysts: A DEMS study Bach Delpeuch, A.; Asset, T.; Chatenet, M.; Cremers, C.	Journal Article
2014	Elektrische Leitfähigkeit von Polypropylen-CNT-Kompositbauteilen in Abhängigkeit des Kristallisationsgrades Imiolek, A.I.; Guschin, V.G.; Becker, W.B.; Weiss, P.W.; Teipel, U.T.	Journal Article
2014	Elektrochemische Detektion von Explosivstoffen im Meer Rabenecker, P.; Pinkwart, K.	Book Article
2014	Elektrochemischer Gassensor, Verfahren zu dessen Herstellung und dessen Verwendung Baltes, Norman; Pinkwart, Karsten; Fischer, Peter	Patent full text
2014	Energetic Materials. Particles, Processing, Applications: 45th International Annual Conference of ICT, June 24 - 27, 2014, Karlsruhe, Germany Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal	Conference Proceedings
2014	Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie Wimmer, A.-K.; Salles, A.; Müller, T.	Conference Paper
2014	Entwicklung eines Ecodesign-Tools für die Luftfahrtindustrie Wimmer, A.-K.; Salles, A.; Müller, T.	Conference Paper
2014	Environmentally-friendly, heat-resistant profiles: Development of materials tailored to process Moser, Kevin; Holzer, Andrei; Bergmann, Björn	Journal Article full text
2014	Evaluation of GA/BAMO-copolymer binder for AL/AP-based propellants Gettwert, Volker; Keicher, Thomas; Franzin, Andrea; Jung, Marcus; Weiser, Volker	Conference Paper
2014	Evaluation of process induced residual stresses in continuous fiber-reinforced hybrid thermoplastic composites Paul, H.; Schweizer, F.; Hangs, B.	Conference Paper
2014	Even lighter Keckl, Christoph; Kuppinger, Jan; Henning, Frank	Journal Article
2014	Eye-safe UV Raman spectroscopy for remote detection of explosives and their precursors in fingerprint concentration Almaviva, S.; Angelini, F.; Chirico, R.; Palucci, A.; Nuvoli, M.; Schnuerer, F.; Schweikert, W.; Romolo, F.S.	Conference Paper
2014	Foam-injected sandwich panels with continuous-reinforced facings Menrath, A.; Henning, F.; Huber, T.; Roch, A.; Riess, C.	Conference Paper
2014	Foreword Manelis, G.; Schubert, H.	Journal Article full text
2014	Future flare compositions Lingen, J.N.J. van; Meuken, D.; Hackspik, M.M.; Mäkeläinen, T.; Weiser, V.; Poulson, G.W.	Conference Paper
2014	Generation of very fine ammonium dinitramide (ADN) paricles by bead milling technology Roßmann, Christian; Heintz, Thomas; Herrmann, Michael	Conference Paper
2014	Gewinnung Mikrofibrillierter Cellulose (MFC) durch mechanischen Aufschluss Köster, A.; Förter-Barth, U.; Herrmann, M.; Schweppe, R.; Teipel, U.	Conference Paper
2014	Handy clever entsorgen Gantner, O.; Köpnick, H.; Bischlager, O.; Teipel, U.; Hagelüken, C.; Reller, A.	Conference Paper
2014	Heat storage by zeolites: A small scale demonstration Elsner, Peter; Epple, Boris; Kollmeier, H.P.; Merkel, S.; Simsek, A.; Eckl, Wilhelm; Pappert, Sandra; Neutz, Jochen	Abstract
2014	Herstellung von Nanocellulose durch mechanischen Aufschluss Köster, Alexander; Förter-Barth, Ulrich; Herrmann, Michael; Schweppe, Rainer; Teipel, Ulrich	Journal Article
2014	Hexamethoxycyclotriphosphazene as a flame retardant for polyurethane foams Käbisch, B.; Fehrenbacher, U.; Kroke, E.	Journal Article
2014	High-voltage ignition of thermite deposits Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Roth, Evelin; Raab, Angelika; Eckl, Wilhelm	Conference Paper
2014	Holistic and consistent design process for hollow structures based on braided textiles and RTM Gnädinger, Florian; Karcher, Michael; Henning, Frank; Middendorf, Peter	Journal Article full text
2014	Hot-spot modelling of propellant regression Knapp, Sebastian; Eisenreich, Norbert; Kelzenberg, Stefan; Weiser, Volker	Conference Paper full text
2014	HTPB bonded pyro-organic spectral flares Roth, Evelin; Weiser, Volker; Raab, Angelika; Lity, André	Conference Paper full text
2014	Hydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage Reza, M.T.; Becker, W.; Sachsenheimer, K.; Mumme, J.	Journal Article
2014	ICT-cellular-combustion-algorithm (ICCA) application to the combustion of complex shaped propellants Wurster, Sebastian; Fischer, Thomas	Conference Paper full text
2014	Ignition of hydrogen jet fires from high pressure storage Kessler, A.; Schreiber, A.; Wassmer, C.; Deimling, L.; Knapp, S.; Weiser, V.; Sachsenheimer, K.; Langer, G.; Eisenreich, N.	Journal Article
2014	Improvement of mechanical properties by additive assisted laser sintering of PEEK Kroh, M.; Bonten, C.; Eyerer, P.	Conference Paper
2014	Improving composite process efficiency on a structural frame for a commercial truck storage door Ruby, M.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.	Conference Paper
2014	Increasing the energy density of the non-aqueous vanadium redox flow battery with the acetonitrile-1,3-dioxolane-dimethyl sulfoxide solvent mixture Herr, T.; Fischer, P.; Tübke, J.; Pinkwart, K.; Elsner, P.	Journal Article
2014	Influence of an optimized 3D-reinforcement layout on the structural mechanics of co-bonded CFRP joints Jürgens, M.; Nogueira, A.C.; Lang, H.; Hombergsmeier, E.; Drechsler, K.	Conference Paper full text
2014	Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements Mußbach, Günter; Bohn, Manfred A.	Conference Paper
2014	Influence of isothermal ageing on the mechanical properties of HTPB-bonded composite rocket propellants expressed as master curves of torsion DMA measurements Mußbach, Günter; Bohn, Manfred A.	Conference Paper full text
2014	Inline-Prozessanalyse chemischer Mikroreaktionsprozesse mittels MIR-Laserspektroskopie Boskovic, D.; Schweikert, W.; Panic, S.; Schwan, K.; Löbbecke, S.	Journal Article
2014	Investigación de recubrimientos multifuncionales en base de micropartículas esféricas de aluminio para aplicación a altas temperatur Roussel Garcia, Raquel	Dissertation
2014	Investigating cavity pressure behavior in high-pressure RTM process variants Rosenberg, P.; Chaudhari, R.; Karcher, M.; Henning, F.; Elsner, P.	Conference Paper
2014	Investigation of quality and reproducibility of foamed propellants Böhnlein-Mauß, Jutta; Kröber, Hartmut	Conference Paper full text
2014	Investigation of the effect of ageing of RDX containing HTPB and GAP bonded high explosive charges on their thermal and shock sensitivity: Presentation held at Energetic Materials Particles, Processing, Applications, 45th International Annual Conference of ICT, June 24 - 27. 2014 Karlsruhe Bohn, Manfred A.; Borne, L.; Herrmann, Michael; Gerber, Peter; Kaiser, M.	Presentation full text
2014	Investigation of the nitrate based EIL 4-Amino-1-methyl-1,2,4- triazolium nitrate as a plasticizer Schaller, Uwe; Weiser, Volker; Keicher, Thomas; Krause, Horst	Conference Paper full text
2014	Investigation of the Shear Thinning Behavior of Epoxy Resins for Utilization in Vibration Assisted Liquid Composite Molding Processes Meier, R.; Kirdar, C.; Rudolph, N.; Zaremba, S.; Drechsler, K.	Conference Paper
2014	Kategorisierung der Schülerlabore - Schülerlabor mit Berufsorientierung Krause, D.; Martin, U.	Journal Article full text
2014	Kohlenstofffasern wiedergewinnen: Welches ist der richtige Weg für das Recycling von CFK? Emmerich, Rudolf; Kuppinger, Jan	Journal Article full text
2014	Kontinuierliche Verfolgung von Fouling-Prozessen in Rohrreaktoren 229 mittels Wärmefluss-Sensorik Antes, J.; Löbbecke, S.; Jentner, D.	Conference Paper
2014	Lab2Venture – Unternehmerisches Denken und Handeln in Schülerlaboren Parrisius, M.; Krause, D.	Journal Article full text
2014	Leichtbau - Trends und Zukunftsmärkte und deren Bedeutung für Baden-Württemberg: Eine Studie im Auftrag der Leichtbau BW GmbH, Koordination Fraunhofer-Institut für System- und Innovationsforschung ISI Thielmann, Axel; Seeliger, Wolfgang; Günther, Bele; Schneider, Marco (Red.); Birenbaum, Christoph (Red.); Stroka, Michael (Red.) ; Leichtbau BW, Stuttgart; Fraunhofer-Institut für System- und Innovationsforschung -ISI-, Karlsruhe; Fraunhofer-Institut für Chemische Technologie -ICT-, Pfinztal; Fraunhofer-Institut für Produktionstechnik und Automatisierung -IPA-, Stuttgart; Fraunhofer-Institut für Arbeitswirtschaft und Organisation -IAO-, Stuttgart; Karlsruher Institut für Technologie -KIT-, wbk Institut für Produktionstechnik, Karlsruhe	Study full text
2014	Leichtbaupotenziale durch faserverstärkte Schäume Roch, A.; Menrath, A.; Huber, T.	Journal Article
2014	LFT foam - lightweight potential for semi-structural components through the use of long-glass-fiber-reinforced thermoplastic foams Roch, A.; Huber, T.; Henning, F.; Elsner, P.	Conference Paper
2014	Lightweight Wheel. Lightweight Wheel-Phase 2 1 and 2 1 ext Bücheler, David	Report
2014	Lignin matrix composites from natural resources - ARBOFORMR® Nägele, H.; Pfitzer, J.; Ziegler, L.; Inone-Kauffman, E.R.; Eckl, W.; Eisenreich, N.	Book Article
2014	Mapping nutrient resorption efficiencies of subarctic cryptogams and seed plants onto the Tree of Life Lang, Simone I.; Aerts, Rien; Logtestijn, Richard S.P. van; Schweikert, W.; Klahn, Thorsten; Quested, Helen M.; Hal, Jürgen R. van; Cornelissen, Johannes H.C.	Journal Article full text
2014	Mass spectrometric investigation of ethanol and acetaldehyde adsorbates electrooxidation on Pt electrocatalyst Bach Delpeuch, A.; Chatenet, M.; Cremers, C.; Tübke, T.	Journal Article
2014	Metal nanopowders : production, characterization, and energetic applications Gromov, A.; Teipel, U.	Book
2014	Micro-morphology of nitrocellulose in gun propellants Böhnlein-Mauß, Jutta; Helfrich, Mathias	Conference Paper full text
2014	Microstructure of NC-propellants investigated by x-ray diffraction (Part II) Herrmann, Michael; Förter-Barth, Ulrich; Kaiser, Manfred; Kupzik, Klaus; Scheibel, Rudolf	Conference Paper full text
2014	Microwave heated beads as selective adsorbents for large volume sampling Heil, Moritz; Hürttlen, Jürgen; Bunte, Gudrun; Krause, Horst	Conference Paper full text
2014	Model of a vanadium redox flow battery with an anion exchange membrane and a Larminie-correction Wandschneider, F.T.; Finke, D.; Grosjean, S.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H.	Journal Article
2014	Modeling ignition and thermal wave progression in binary granular pyrotechnic compositions Knapp, Sebastian; Weiser, Volker; Kelzenberg, Stefan; Eisenreich, Norbert	Journal Article full text
2014	Modelling of the consumption of a dye used to probe the decomposition of nitrocellulose: Presentation held at Energetic Materials Particles, Processing, Applications, 45th International Annual Conference of ICT, June 24 - 27., 2014, Karlsruhe Bohn, Manfred A.; Moniruzzaman, Mohammed; Bellerby, John	Presentation full text
2014	Modification of the mechanical granule properties via internal structure Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich; Antonyuk, Sergiy; Heinrich, Stefan	Journal Article
2014	Monitoring of reinforced composites processed by microwave radiation using fiber-Bragg gratings Barrera, D.; Roig, I.; Sales, S.; Emmerich, R.	Conference Paper
2014	A multi-stack simulation of shunt currents in vanadium redox flow batteries Wandschneider, F.T.; Röhm, S.; Fischer, P.; Pinkwart, K.; Tübke, J.; Nirschl, H.	Journal Article
2014	Multifunctional composites Hübner, Christof	Journal Article full text
2014	Multifunctional composites based on polypropylene with excellent electrical, thermal and structural properties Hübner, C.; Sathyanarayana, S.	Conference Paper
2014	Multiple headspace extraction for gas detection in ionic liquids Müller, D.; Fühl, M.; Pinkwart, K.; Baltes, N.	Journal Article
2014	Nanometals in energetic systems: Achievements and future Gromov, A.; DeLuca, L.T.; Il'in, A.P.; Teipel, U.; Petrova A.; Prokopiev, D.	Journal Article
2014	Neue Composite-Raketenfesttreibstoffe für taktische Raketenantriebe - rauchfrei, schnellbrennend und leistungsstark Gettwert, V.; Keicher, T.; Heintz, T.; Weiser, V.	Book Article
2014	Neue Verfahren zur Verwertung von Verbundwerkstoffen Woidasky, Jörg M.	Conference Paper full text
2014	New energetic thermoplastic elastomers for pressed explosive charges Holler, Marcel; Keicher, Thomas; Gerber, Peter; Happ, Andreas; Klapötke, Thomas M.; Stierstorfer, Jörg	Conference Paper full text
2014	New version of the ICT-thermodynamic code Kelzenberg, Stefan; Kempa, Paul-Bernd; Wurster, Sebastian; Herrmann, Michael; Fischer, Thomas	Conference Paper full text
2014	Nitration chemistry in continuous flow using acetyl nitrate Antes, Jürgen; Janitschek, Wieland; Keicher, Thomas; Löbbecke, Stefan	Conference Paper full text
2014	Noch weniger Gewicht Keckl, Christoph; Kuppinger, Jan; Henning, Frank	Journal Article
2014	Numerical investigation on the structural mechanics of a joining technique for composite materials: The redundant high efficiency assembly Lang, H.; Nogueira, A.C.; Jürgens, M.; Hombergsmeier, E.; Drechsler, K.	Conference Paper full text
2014	On the kinetics of AlH3 decomposition and the subsequent Al oxidation Eisenreich, N.; Keßler, A.; Koleczko, A.; Weiser, V.	Journal Article
2014	On-line vs off-line electrical conductivity characterization. Polycarbonate composites developed with multiwalled carbon nanotubes by compounding technology Llorens-Chiralt, R.; Weiss, P.; Mikonsaari, I.	Conference Paper
2014	Overview of the German gel propulsion technology program Ciezki, H.K.; Negri, M.; Hürttlen, J.; Weiser, V.; Naumann, K.W.; Ramsel, J.	Conference Paper
2014	Particle size adjustment of spherical ammonium dinitramide particles (ADN-Prills) produced by emulsion crystallization Heintz, Thomas; Reinhard, Werner; Birke, Christoph; Leisinger, Karlfred	Conference Paper full text
2014	Partikeltechnologie: Editorial Teipel, U.; Weber, A.	Journal Article
2014	Passivation of Metal Nanopowders Gromov, A.; Il'in, A.; Teipel, U.; Pautova, J.	Book Article
2014	Polymere Flammschutzmittel, Verfahren zu deren Herstellung und flammgeschützte Polymersysteme Barner, Leonie; Eisenblätter, Jördis; Fehrenbacher, Ulrich; Barner-Kowollik, Christopher; Lang, Christiane	Patent full text
2014	Pretreatment of biogenic raw materials Chairopoulou, M.A.; Eisenlauer, M.; Teipel, U.; Schweppe, R.	Conference Paper
2014	Problems and faulty uses with the Prout-Tompkins description of autocatalytic reactions and the solutions Bohn, Manfred A.	Journal Article
2014	Process development of injection molded parts with wound fiber structures for local reinforcement Heinzle, V.; Huber, T.; Henning, F.; Elsner, P.	Conference Paper
2014	Process efficiency improvements for a structural doorframe support panel molded from unidirectional E-glass/polypropylene composite tapes Eastep, D.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.	Conference Paper
2014	Produktgestaltung mit Sekundärrohstoffen aus der Baustoff- und Keramikindustrie Teipel, U.	Conference Paper
2014	Proximal detection of energetic materials on fabrics by UV-Raman spectroscopy Chirico, R.; Almaviva, S.; Colao, F.; Fiorani, L.; Nuvoli, M.; Schweikert, W.; Schnürer, F.; Cassioli, L.; Grossi, S.; Mariani, L.; Angelini, F.; Menicucci, I.; Palucci, A.	Conference Paper
2014	Pultrusion of flax/poly(lactic acid) commingled yarns and nonwoven fabrics Linganiso, L.Z.; Bezerra, R.; Bhat, S.; John, M.; Braeuning, R.; Anandjiwala, R.D.	Journal Article
2014	Quantification of local fiber distribution for optimization of tape laying techniques Guglhoer, T.; Manger, F.; Sause, M.G.R.	Conference Paper full text
2014	Raman Spectroscopy Study on the Addition of Peroxides as a Dispersing Additive in Multiwalled Carbone Nanotube Reinforced Polypropylene Composites Sathyanarayana, S.; Olowojoba, G.; Hübner, C.; Diemert, J.; Pötschke, P.; Henning, F.	Conference Paper
2014	Rapid deployable ballistic barriers based on airbag systems Roussel Garcia, Raquel; Bernewitz, Johanna; Neutz, Jochen	Conference Paper
2014	Reactions of magnesium in different atmospheres Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel	Conference Paper full text
2014	Reactions of metal carbides in different atmospheres Rozincsak, Linda; Eisenreich, Norbert; Neutz, Jochen; Roussel Garcia, Raquel	Conference Paper full text
2014	Recent achievements in kinetic modeling of stabilizer consumption in NC-based propellants Bohn, M.A.	Conference Paper
2014	Recent achievements in kinetic modelling of stabilizer consumption and molar mass degradation in NC-based propellants Bohn, Manfred A.	Conference Paper
2014	Recent improvements within the testing and certification process of explosive detection systems as basis of a harmonized european test regime Röseling, D.; Schnürer, F.; Heil, M.; Rieger, M.; Ulrich, C.; Krause, H.	Conference Paper
2014	Recovering carbon fibers: Which way is the right way to recycle CFRP? Emmerich, Rudolf; Kuppinger, Jan	Journal Article full text
2014	Recycling von Weichschaumpolyurethan aus Flugzeugsitzen mittels Glykolyse Hanich, Ronny	Master Thesis full text
2014	Reibenergieverteilungen von Mahlkugelkontakten Köster, Alexander; Scherge, Matthias; Teipel, Ulrich	Journal Article
2014	Reibenergieverteilungen von Mahlkugelkontakten Köster, A.; Scherge, M.; Teipel, U.	Conference Paper
2014	Simulation of propellant combustion using the ICT-cellular-combustion-algorithm (ICCA) Wurster, S.; Fischer, T.S.	Conference Paper
2014	Size effects of self-assembled block copolymer spherical micelles and vesicles on cellular uptake in human colon carcinoma cells Chang, T.; Lord, M.S.; Bergmann, B.; Macmillan, A.; Stenzel, M.H.	Journal Article
2014	Size Matters! On the way to ionic liquid systems without ion pairing Rupp, A.; Roznyatovskaya, N.; Scherer, H.; Beichel, W.; Klose, P.; Sturm, C.; Hoffmann, A.; Tübke, J.; Koslowski, T.; Krossing, I.	Journal Article
2014	Snow as a paradigm for acoustic absorbers Maysenhölder, Waldemar; Mikonsaari, Irma	Conference Paper full text
2014	Solid state electrolytes for ambient and middle temperature next generation electrochemical storage systems Ahlbrecht, K.; Holzapfel, M.; Tübke, J.; Hoffmann, M.J.	Conference Paper
2014	Spectroscopy of pyrotechnic tracer compositions under different pressure Weiser, Volker; Knapp, Sebastian; Roth, E.; Raab, Angelika; Kelzenberg, Stefan; Cegiel, D.	Conference Paper full text
2014	Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes Hagen, M.; Quiroga-González, E.; Dörfler, S.; Fahrer, G.; Tübke, J.; Hoffmann, M.J.; Althues, H.; Speck, R.; Krampfert, M.; Kaskel, S.; Föll, H.	Journal Article
2014	Synthesis and characterization of polymers with phosphorus side chains Eisenblätter, Jördis	Dissertation
2014	Synthesis and properties of random co-polymer poly-(GA/BAMO) as energetic binder Keicher, Thomas; Janitschek, Wieland; Schaller, Uwe; Krause, Horst; Kaiser, M.	Conference Paper full text
2014	Synthesis and test of suitable adsorbers for selectively trapping and detecting explosives and improvised explosives precursors from air Bunte, G.; Hürttlen, J.; Heil, M.; Rieger, M.; Krause, H.	Conference Paper
2014	Synthesis of polymer particles and capsules employing microfluidic techniques Boskovic, D.; Loebbecke, S.	Journal Article
2014	Thermal decomposition of nano-structured carbon Eisenreich, Norbert; Kelzenberg, Stefan; Knapp, Sebastian; Koleczko, Andreas; Schuppler, Heike; Weiser, Volker	Conference Paper full text
2014	Thermoplastische Faserverbundkunststoffe - Vom Tape zum strukturellen Bauteil am Beispiel eines Versteifungsinlays für eine LKW-Staufachklappe Baumgärtner, S.; Henning, F.; Joppich, T.; Hangs, B.; Huber, T.; Manger, F.; Begert, M.; Reif, M.	Conference Paper
2014	Trikresylphoshat-freies Öl, Schmierstoff oder Turbinenöl Schmid, Helmut; Eckl, Wilhelm; Moriske, Heinz-Jörn	Patent full text
2014	Umweltfreundliche, wärmeformbeständige Profile: Material und Prozess passgenau entwickelt Moser, Kevin; Holzer, Andrei; Bergmann, Björn	Journal Article full text
2014	Use of unidirectional thermoplastic composite tapes to reduce mass & improve performance of a steel doorframe support on a commercial truck Clark, G.; Reif, M.; Begert, M.; Gerster, M.; Schneider, E.; Joppich, T.; Baumgärtner, S.	Conference Paper
2014	Variation der mechanischen Eigenschaften von Sprühgranulaten über die innere Struktur Eckhard, Susanna; Fries, Manfred; Teipel, Ulrich	Journal Article
2014	Verfahren und Vorrichtung zur Bestimmung eines Rohstoffgehaltes in einem Gebäude Woidasky, Jörg; Sevilmis, Neyir; Ritz, Martin	Patent full text
2014	Verfahren und Vorrichtung zur Ermittlung der Zündgrenzen von Gasgemischen Müller, Dominik; Abert, Michael; Berger, Thomas; Krampfert, Matthias; Bayha, Thomas	Patent full text
2014	Verfahren zur Herstellung eines elektrisch leitfähigen Kunststoff-Werkstoffes und dessen Verwendung sowie solchermaßen hergestellter Kunststoff-Werkstoff Diemert, Jan; Hübner, Christof; Sathyanarayana, Shyam; Weiss, Patrick; Just, Daniel	Patent full text
2014	Verfahren zur Herstellung eines Polyurethan-Blockschaumstoffes Hohenhorst, Manfred; Kugler, Michael; Fehrenbacher, Ulrich; Stricker, Matthias; Schäfer, Kai; Giesker, Christian	Patent full text
2014	Verfahren zur Rückgewinnung von Fasern aus Bauteilen oder Produkten aus Kunststoff-Faserverbundmaterialien Woidasky, Jörg; Seiler, Elisa	Patent full text
2014	Vorrichtung zur Herstellung von thermoplastischen und/oder thermoelastischen Polymer-Formteilen Diemert, Jan; Huber, Timo; Roch, Alexander; Anselment, Christian	Patent full text
2014	Wegweisend: Fertigung thermoplastischer und duromerer Bauteile aus Faserverbundkunststoffen Baumgärtner, Sebastian; Joppich, Tobias	Book Article full text
2014	Wertschöpfungspotenziale im Leichtbau und deren Bedeutung für Baden-Württemberg: Eine Studie im Auftrag der Leichtbau BW GmbH. Koordination Fraunhofer-Institut für System- und Innovationsforschung ISI Thielmann, Axel; Lerch, Christian; Seeliger, Wolfgang; Bele, Günther; Zanker, Christoph; Jäger, Angela; Keckl, Christoph; Kuppinger, Jan; Henning, Frank; Stroka, Michael (Red.); Schneider, Marco (Red.); Birenbaum, Christoph (Red.); Fleischer, Jürgen; Lanza, Gisela; Baumann, Florian; Kopf, Robin; Krämer, Alexandra; Wagner, Henning ; Leichtbau BW, Stuttgart; Fraunhofer-Institut für System- und Innovationsforschung -ISI-, Karlsruhe; Fraunhofer-Institut für Treib- und Explosivstoffe -ICT-, Pfinztal; Fraunhofer-Institut für Produktionstechnik und Automatisierung -IPA-, Stuttgart; Karlsruhe Institute of Technology -KIT-	Study full text
2014	Wind Blades Using Cost-Effective Advanced Lightweight Design: Innovative Solutions for Wind Blades Made of Advanced Thermoplastic Materials Heinzle, V.; Rapp, F.; Huber, T.; Knudsen, H.	Conference Paper
2014	X-ray-absorption measurements of explosives and the effective atomic number ZEFF Herrmann, Michael; Förter-Barth, Ulrich; Heintz, Thomas; Röseling, Dirk; Krause, H.	Conference Paper full text
2014	Zur Energie der Mahlkörperreibung Köster, A.; Scherge, M.; Teipel, U.	Journal Article

This publication list has been generated from the publication database Fraunhofer-Publica.

Fraunhofer-Publica

Publications from 2020

Publications from 2019

Publications from 2018

Publications from 2017

Publications from 2016

Publications from 2015

Publications from 2014

Contact Press / Media

Beate Malcher

Contact Press / Media

Gertrud Malcher

Contact Press / Media

Dipl.-Phys. Stefanie Mutterer

Contact Press / Media

Dipl.-Phys. Katharina Wörsing